• 대한치과교정학회지
• /
• 제45권3호
• /
• pp.113-120
• /
• 2015

Objective: This study compared occlusal contact areas of ideally planned set-up and accomplished final models against the initial in class I and II molar relationships at finishing. Methods: Evaluations were performed for 41 post-orthodontic treatment cases, of which 22 were clinically diagnosed as class I and the remainder were diagnosed as full cusp class II. Class I cases had four first premolars extracted, while class II cases had maxillary first premolars extracted. Occlusal contact areas were measured using a three-dimensional scanner and RapidForm 2004. Independent t-tests were used to validate comparison values between class I and II finishings. Repeated measures analysis of variance was used to compare initial, set up, and final models. Results: Molars from cases in the class I finishing for the set-up model showed significantly greater contact areas than those from class II finishing (p < 0.05). The final model class I finishing showed significantly larger contact areas for the second molars (p < 0.05). The first molars of the class I finishing for the final model showed a tendency to have larger contact areas than those of class II finishing, although the difference was not statistically significant (p = 0.078). Conclusions: In set-up models, posterior occlusal contact was better in class I than in class II finishing. In final models, class I finishing tended to have larger occlusal contact areas than class II finishing.

• BMB Reports
• /
• 제38권5호
• /
• pp.533-538
• /
• 2005

The kinetics of thermal dissociation of superoxide dismutase (SOD) was studied in 0.05 M Tris-HCl buffer at pH 7.4 containing $10^{-4}\;M$ EDTA. The number of conformational locks and contact areas and amino acid residues of dimers of SOD were obtained by kinetic analysis and biochemical calculation. The cleavage bonds between dimers of SOD during thermal dissociation and type of interactions between specific amino acid residues were also simulated. Two identical contact areas between two subunits were identified. Cleavage of these contact areas resulted in dissociation of the subunits, with destruction of the active centers, and thus, lost of activity. It is suggested that the contact areas interact with active centers by conformational changes involving secondary structural elements.

• 한국조경학회지
• /
• 제25권4호
• /
• pp.30-38
• /
• 1998

Nowaday special attention is being paid to the conservation of all species or ecosystmes of sites for public projects. Many environmental conservation policies and projects in Japan emphasize the coexistence of man with nature and close contact with nature. The objectives of this study was to investigate policies and projects for the creation of areas for the close contact with nature in Japan, to characterize change of techniques for the space creation over times, and to classify those policies and projects implemented by many government agencies. This study was mainly carried out by literature survey of laws, policies and projects related to environmental conservation pertinent to national scale. Major findings of this study can be summarized as follows: First, two most significant turning points for the environmental conservation in Japan were the establishment of the Office of Environmental in 1971 and the enactment of many laws influenced by the awareness of global environmental problems since 1990. Second, polices and projects for the creation of areas for the close contact with nature started in 1960s by the Office of Forestry, and focused on planting and development of simple facilities in forests. And the conservation of natural environment, ecological restoration and the expansion of urban green spaces, and the creation of biotopes and other areas for the close contact with nature in urban areas were the major characteristics of environmental conservation in Japan during 1970s, 1980s, and 1990s, respectively.

• Structural Engineering and Mechanics
• /
• 제54권4호
• /
• pp.607-622
• /
• 2015

This paper presents a comparative study of analytical method and finite element method (FEM) for analysis of a continuous contact problem. The problem consists of two elastic layers loaded by means of a rigid circular punch and resting on semi-infinite plane. It is assumed that all surfaces are frictionless and only compressive normal tractions can be transmitted through the contact areas. Firstly, analytical solution of the problem is obtained by using theory of elasticity and integral transform techniques. Then, finite element model of the problem is constituted using ANSYS software and the two dimensional analysis of the problem is carried out. The contact stresses under rigid circular punch, the contact areas, normal stresses along the axis of symmetry are obtained for both solutions. The results show that contact stresses and the normal stresses obtained from finite element method (FEM) provide boundary conditions of the problem as well as analytical results. Also, the contact areas obtained from finite element method are very close to results obtained from analytical method; disagree by 0.03-1.61%. Finally, it can be said that there is a good agreement between two methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.261-261
• /
• 2010

In electric railways, high speed trains are normally supplied by AC 25kV power by contact between a pantograph contact strip and a contact wire. Advanced railway operating countries are actively researching various areas for the development of contact strips due to the reason that the properties of contact strips are one of the key factors of electric railways. This paper applied nano technology which is rapidly growing in many areas to the contact strip of a pantograph for current collection performance improvement considering speed up of electric railways. In detail, this paper proposes a method to dope nano particles of metal to a Korea Train eXpress(KTX) carbon pantograph and its measurement results. It is expected that the contents of this paper be used for preliminary study of high-speed railway current collection technologies.

• 한국군사과학기술학회지
• /
• 제18권4호
• /
• pp.402-408
• /
• 2015

Protection against direct projectiles has been adapted just to the main command posts in the existing protective facility standards. However, protective capacity for the shelters against direct projectiles is also required because the initial survivability as well as the operation sustainment of the shelters is critical during a couple of days from outbreak of war. In this study, the Russian artillery is used to determine the existing and future threat of the North Korean Armed Forces indirectly. And then, required protective capacity of military shelters in the contact areas is calculated along with UFC 3-340-02 and it is verified using modeling and simulation. Based on the assessed capacity, actual inspect of military facilities with contact areas on spot is performed whether military shelters have enough protection capacity against determined threats. According to the field study, it is verified that proper earth bermed shelter has enough protection capacity. The results in this study could be used how to retrofit the current shelters in the contact areas.

• Structural Engineering and Mechanics
• /
• 제78권5호
• /
• pp.585-597
• /
• 2021

This paper presents a comparative study of analytical method, finite element method (FEM) and Multilayer Perceptron (MLP) for analysis of a contact problem. The problem consists of a functionally graded (FG) layer resting on a half plane and pressed with distributed load from the top. Firstly, analytical solution of the problem is obtained by using theory of elasticity and integral transform techniques. The problem is reduced a system of integral equation in which the contact pressure are unknown functions. The numerical solution of the integral equation was carried out with Gauss-Jacobi integration formulation. Secondly, finite element model of the problem is constituted using ANSYS software and the two-dimensional analysis of the problem is carried out. The results show that contact areas and the contact stresses obtained from FEM provide boundary conditions of the problem as well as analytical results. Thirdly, the contact problem has been extended based on the MLP. The MLP with three-layer was used to calculate the contact distances. Material properties and loading states were created by giving examples of different values were used at the training and test stages of MLP. Program code was rewritten in C++. As a result, average deviation values such as 0.375 and 1.465 was obtained for FEM and MLP respectively. The contact areas and contact stresses obtained from FEM and MLP are very close to results obtained from analytical method. Finally, this study provides evidence that there is a good agreement between three methods and the stiffness parameters has an important effect on the contact stresses and contact areas.

• 정보저장시스템학회논문집
• /
• 제10권1호
• /
• pp.14-18
• /
• 2014

Adhesion between carbon nanotube (CNT) arrays is measured and characterized for number of different contact areas. The CNT arrays are directly grown on an electrostatic microactuator, and they make contact with each other during the growth process. The pull-out force is precisely applied by the microactuator while the contact status is identified by measuring electrical resistance between the CNT arrays. We have designed different contact areas of 1000, 6000, and 8500 ${\mu}m^2$ between the CNT arrays, and the corresponding adhesion increases from 0.9 to 3.7 ${\mu}N$ as the contact area increases.

• Structural Engineering and Mechanics
• /
• 제54권1호
• /
• pp.69-85
• /
• 2015

In this paper, a receding contact problem for an elastic layer resting on two quarter planes is considered. The layer is pressed by a stamp and distributed loads. It is assumed that the contact surfaces are frictionless and only compressive traction can be transmitted through the contact surfaces. In addition the effect of body forces are neglected. Firstly, the problem is solved analytically based on theory of elasticity. In this solution, the problem is reduced into a system of singular integral equations in which contact areas and contact stresses are unknowns using boundary conditions and integral transform techniques. This system is solved numerically using Gauss-Jacobi integral formulation. Secondly, two dimensional finite element analysis of the problem is carried out using ANSYS. The dimensionless quantities for the contact areas and the contact pressures are calculated under various distributed load conditions using both solutions. It is concluded that the position and the magnitude of the distributed load have an important role on the contact area and contact pressure distribution between layer and quarter plane contact surface. The analytic results are verified by comparison with finite element results.

• 한국조경학회지
• /
• 제27권3호
• /
• pp.69-79
• /
• 1999

Recently, new concept and paradigm of 'Environmentally-Friendless' is taking a growing interest in environmental planning and design. This study is to develop the new approach of sustainable development, and to establish the indicators for environmentally-friendliness of "Tourism Farms" in rural areas. A questionnaire survey was conducted for deputy manager group and expert group. The environmentally-friendliness of tourism farms is composed of three categories, conservation of global environment(Low Impact), friendliness to surrounding nature(High Contact), and environmental health and amenities (Health '||'&'||' Amenity). Four indicators, such as saving of energy and water resource, reduction and reuse of garbage, natural purification of sewage disposal, and utilization of natural energy, were affecting the first category, i.e., conservation of global environment(Low Impact). And, friendliness to surrounding nature (High Contact) is affected by 3 indicators, such as contact to nature and diverse green areas, water intimate '||'&'||' contact areas, and natural ecology observation by biotope. Finally, the dimension of environmental health and amenity is affected by 3 indicators, such as nature affinity by farming experience, environmental-friendliness of soil '||'&'||' crops by organic farming, campaign and education programs of environmentally-friendliness. From the result of Importance-Performance Analysis(IPA) for 10 indicators, environmentally-friendliness was recommended as 'Concentrate Here'. And, the content validity of 10 indicators for 3 categories was examined by factor analysis. The result showed as the same as hypothetical model, which proved the validity of hypothetical model.