• Korean Journal of Community Nutrition
• /
• v.6 no.5
• /
• pp.734-743
• /
• 2001

Iron deficiency anemia is a worldwide public health problem relevant to unsound nutritional practice. While the prevalence of iron deficiency anemia is very common among pregnant women, appropriate nutritional service programs to improve the iron status are lacking in Korea. In an attempt to develop a nutritional screening tool to separate the high-risk subjects of iron deficiency, we carried out a nutritional survey for 115 Korean pregnant women whose gestational age ranged from 13 to 24 weeks. Each subject was interviewed with questionnaires for general characteristics and dietary habits. Food intake was measured by 24-hour recap method and 2 day record. Fasting blood was drawn for measuring hemoglobin and serum ferritin. It appeared that half of the pregnant women belonged to the anemia group and had insufficient dietary habits to provide adequate amounts of dietary iron. The first gravida and the working women had better hematological iron indicators than the second or more gravida and the housewives. It also appeared that women who had bigger family size and lower BMI in pre-pregnancy had poorer iron status. Among the food consumption habits, fruit dependent dietary habit was related to poor iron status. Sufficiently consumed green leafy vegetable and appropriate amount of food before morning sickness were positive factors of iron stares. Our results indicated that parity, BMI, current job, family size, food habits including consumption of fruits, green & yellow vegetables, and food habits before the onset of morning sickness are significant factors to contribute the Fe deficiency anemia during pregnancy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.657-658
• /
• 2005

We designed 10bit source driver LSI, then the high color depth and the low power consumption are realized thru it. It is adopted mini-LVDS receiver with high speed data transmission and good data recovery performance, Hybrid type DAC to reduce decoder size and OP-AMP with low power consumption and high slew rate. In addition we show our results of the 10-bit gray scale TFT-LCD source driver for 42inch diagonal size and WXGA resolution TFT-LCD TV applications.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.11
• /
• pp.972-980
• /
• 2002

This work is aimed at estimating the effects of various factors on the energy consumption of Korean-style apartment houses using TRNSYS. The factors considered here include the nominal size of floor area, type of remodeling, azimuth, sidewall insulation, and window type. Based on some assumptions, an actual apartment house is simplified into a model that is used for thermal load calculations. The simplified model is validated by showing a good agreement with the actual one in the predicted result. Remodeling balconies into unconditioned buffer spaces yields a favorable thermal performance in comparison with the original type regardless of the nominal size. Incorporating balconies into a conditioned indoor space leads to sharp increases in thermal loads, which must be avoided in view of energy conservation as well as structural problem. A quantitative assessment on the azimuthal effect indicates that the heating energy can be saved up to 16％ by taking the south or southeast direction. Reduction in the heating load with enhancing the sidewall insulation is gradual, so that a cost-effectiveness analysis may be needed when amending the regulations concerned. Glazing appears to significantly affect the heat transfer through window. A typical case illustrates that the heating load is decreased about 25％ by simply adopting triple glazing instead of double glazing.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.228-241
• /
• 1997

In this paper, we present a design of modem and vocoder digital signal processor (DSP) chips for CDMA mobile station. The modem chip integrates CDMA reverse link modulator, CDMA forward link demodulator and Viterbi decoder. This chip contains 89,000 gates and 29 kbit RAMs, and the chip size is $10 mm{\times}10.1 mm$ which is fabricated using a $0.8{\mu}m$ 2 metal CMOs technology. To carry out the system-level simulation, models of the base station modulator, the fading channel, the automatic gain control loop, and the microcontroller were developed and interfaced with a gate-level description of the modem application specific integrated circuit (ASIC). The Modem chip is now successfully working in the real CDMA mobile station on its first fab-out. A new DSP architecture was designed to implement the Qualcomm code exited linear prediction (QCELP) vocoder algorithm in an efficient way. The 16 bit vocoder DSP chip has an architecture which supports direct and immediate addressing modes in one instruction cycle, combined with a RISC-type instruction set. This turns out to be effective for the implementation of vocoder algorithm in terms of performance and power consumption. The implementation of QCELP algorithm in our DSP requires only 28 million instruction per second (MIPS) of computation and 290 mW of power consumption. The DSP chip contains 32,000 gates, 32K ($2k{\times}16\;bit$) RAM, and 240k ($10k{\times}24\;bit$) ROM. The die size is $8.7\;mm{\times}8.3\;mm$ and chip is fabricated using $0.8\;{\mu}m$ CMOS technology.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.179-187
• /
• 2012

Power saving is one of the most important features that extends the lifetime of portable devices in mobile wireless networks. The IEEE 802.16e mobile broadband wireless access system adopts a power saving mechanism with a binary truncated exponent algorithm for determining sleep intervals. When using this standard power saving scheme, there is often a delay before data packets are received at the mobile subscriber station (MSS). In order to extend the lifetime of a MSS, the battery energy must be used efficiently. This paper presents a dynamically alternating sleep interval scheduling algorithm as a solution to deal with the power consumption problem. We take into account different traffic classes and schedule a proper sequence of power saving classes. The window size of the sleep interval is calculated dynamically according to the packet arrival rate. We make a tradeoff between the power consumption and packet delay. The method achieves the goal of efficiently reducing the listening window size, which leads to increased power saving. The performance of our proposed scheme is compared to that of the standard power saving scheme. Simulation results demonstrate the superior performance of our power saving scheme and its ability to strike the appropriate performance balance between power saving and packet delay for a MSS in an IEEE 802.16e mobile broadband wireless access system.

• Korean Journal of Rural Living Science
• /
• v.6 no.1
• /
• pp.73-84
• /
• 1995

The objective of this thesis is to analyse empirically the economic resource problems of the rural poor households. Data from 444 rural sample households in four provinces, divided into two subgroups, the poor and the non-poor households, were analysed and compared. The owned arable land size, level of agricultural and non-agricultural income, assets, debts and the sufficiency of living expenses of the poor households were measured and compared with those of non-poor households respectively. The significant findings and drawn conclusions are as follows : The rural poor households 1. tends to show smaller family size, older age and lower level of education of homemakers than the non-poor households, that might work as constraints to income sources and quality. 2. has not only small arable lands and agricultural income but also even smaller cash income, less than 50% of total income, with 27% of self-product consumption and depends more on non-agricultural income than the non-poor households. Such weakness of income structure might cause and increase the income instability of the rural poor households. 3. reveals significantly different level and components of assets from the non-poor households lower level of assets, less amounts of but more load of debt due to lower solvency that comes from low level of income and assets, higher debts for consumption and lower accessibility to credit. All these socio-demographic and economic characteristics of the rural poor households might have compound effects on the economic problems of the poor households and make vicious circle of poor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.6
• /
• pp.603-608
• /
• 2007

In the conventional AOA(angle-of-arrival) positioning utilizing reverse-link wireless channel, each sensor should be equipped with an array antenna to measure the incident angle of signal transmitting from a tag. To perform the complicated signal processing for angle measurements, sensor size and its power consumption will be large. In some applications like mobile robot location, there exists no strict restriction in tag size or in power consumption. Rather, it is desirable that the sensor would be as small as possible. This paper presents a new AOA positioning method utilizing forward-link channel. Under the assumption that the mobile robot is operating on the flat surface, the measurement model for FLAOA(tiJrward-link AOA) is derived first. Two kinds of position estimation algorithms using FLAOA measurements are proposed; Gauss-Newton method and closed-fonn solution method. With the proposed methods, we can ohtain the attitude of robot as well as its position. Positioning performance of proposed methods is compared by computer simulation. Simulation results show that the closed-form solution method using FLAOA measurements is suitable for indoor robot positioning.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.15-16
• /
• 2005

Chalcogenide phase change memory has high performance to be next generation memory, because it is a nonvolatile memory processing high programming speed, low programming voltage, high sensing margin, low consumption and long cycle duration. We have developed a new material of PRAM with $Ge_1Se_1Te_2$. This material has been propose to solve the high energy consumption and high programming current. We have investigated the phase transition behaviors in function of various process factor including contact size, cell size, and annealing time. As a result, we have observed that programming voltage and writing current of $Ge_1Se_1Te_2$ are more improved than $Ge_2Sb_2Te_5$ material.

• Journal of Korean Society for Quality Management
• /
• v.42 no.1
• /
• pp.15-32
• /
• 2014

This study examines the relationship between tip amount and its possible antecedents: bill size, the Big Five personality types, meal type, food quality, atmosphere, service quality, consumer gender, server gender, customer hospitality experience, race, and alcohol consumption. A survey of southeastern undergraduate students was conducted to collect information about the customer, server and customer tipping habits. While the analysis suggests that service is an important factor, it shows that other factors affect tip amount. Furthermore, these factors affect tip amounts in many different ways. Some examples of these factors include bill size, alcohol consumption, gender dynamics, meal type, food quality, and personality type. The conclusion suggests the intuition behind these factors by providing a dissection of their meaning and their importance to servers, customers, and managers alike. Purpose: This study tests restaurant customer tipping habits and some personality traits that have received limited previous attention as predictors of tipping. Methods: This study is that the tip amount was self-reported, business students at a university in a large southeastern city of USA were asked to complete a tipping journal. Results: This study was able to replicate the service-tipping relationship. Moreover, this study reiterated that server friendliness is a very powerful tool to increasing tips. Conclusion: This study strongly indicate that service has a positive relationship with tip amount, and also produce a positive relationship with emotional stability and a negative relationship to conscientiousness.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.247-251
• /
• 2008

This paper presents a micro air pump actuated by PZT actuator (synthetic jet actuator) for air supply for micro fuel cells. The synthetic jet actuators are usually created by a traditional PZT-driven actuator, which consists of a small cylindrical cavity, in/outlet channel and PZT diaphragms. To design the micro air pump, a numerical analysis has been conducted for flow characteristics with respect to various geometries. A prototype of the micro air pump, with a size of $mm{\times}mm{\times}mm$, was fabricated by PDMS replication process and was conducted performance test. To control the PZT actuator, we used the SP4423 micro chips that can be amplified input voltage to reduce the controller size and the power consumption. With a voltage of 3V at 100Hz, the air pump's pumping pressure is 600pa and its power consumption is only 0.1mW.