• KIEAE Journal
• /
• 제7권2호
• /
• pp.39-46
• /
• 2007

A high-rise building construction in Korea has some problems in engineering, construction and management technologies although the high-rise building construction is recently booming. In addition, the lack of skilled construction labors is increasing, so the development for methods is needed to reduce the labors by prefabrication and mechanization. A re-bar work is one of very important works with regard to cost and schedule management in the high-rise building construction. Nevertheless, the re-bar work has some problems that it is needed many re-bars for joints linking and much time for lifting due to high-rise buildings, and it is difficult to level the skill of labors. So, in this study, the pre-fabrication of three-story height in column re-bars is proposed and the results of an implementation are analyzed and explored by a case study. As the results of case study, the pre-fabrication of three-story heights in column re-bars could reduce the cost in the re-bar work and accelerate the time in the structural frame work. In addition, the pre-fabrication of three-story height in column re-bars could solve the problems such as the waste of many re-bars for joints linking, and the lack of the skilled labors.

• 복합신소재구조학회 논문집
• /
• 제5권2호
• /
• pp.21-26
• /
• 2014

This paper introduces general concepts of jointless bridges and field construction case of semi-integral bridge with psc girder integrating end-diaphragm. The expansion joints need to satisfy thermal and safety conditions of bridges. General bridges with joints have some problems, which are frequently replacement cycle time from mechanical damage or unstable movement, maintenance cost and more. To solve these problems, Integral Abutment Bridges(IAB) have been applied overseas in the 1930s. In Korea, first IAB was constructed in the early 2000s and precast IAB systems was invented and applied lately. Kyungshin overpass bridge in Incheon is the Semi-IAB constructed, the span length is 2@35=70m and the width is 13.9m. The original plan was to use general joint bridge but design field changed with expectations for advanced economic estimation and maintenance. This changed method of B.I.B bridge construction provided not only workability, construction cost but also safety improvement at the same time.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.295-298
• /
• 2005

In General, post-installed dowel bars are used as a shear connector to ensure the composite actions between new slabs and existing slabs in an apartment remodelling constructions expecially for enlarging the interior space outward the existing buildings. But, it has not been checked that the connection performance between existing and new slab is satisfactory not only for the structural safety condition but also the for serviceability and dwelling requirements. In this research, an experimental works were presented to evaluate the load transfer capacity for the planar joints between existing and new slab. The existing slabs were obtained from the existing apartment housing which will be demolished. Test results showed that the planar joints with post-installed dowel bars behaved in full composite modes until ultimate capacity of test specimens, so sufficient ultimate and serviceability performance are confirmed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.325-328
• /
• 2006

Joint structures of composite truss bridges can have the same details for the connection between diagonal members and upper concrete slab as the connection between diagonal members and lower concrete slab. Adequate connection details should be decided according to design codes, constructibility, and economical evaluation. It is necessary to clarify the design check items and load transferring mechanism because combined external loads on composite truss bridges are concentrated at the joints. Joints with gusset plates and stud connectors are applied and complicated joint details may arise some problems in construction. This paper deals with experimental evaluation of the joints in composite truss bridges and proper design provisions were investigated to enhance the details. Push-out test specimens with group studs were fabricated and the effects of grouping and bent studs were studied.

• Advances in concrete construction
• /
• 제8권2호
• /
• pp.91-100
• /
• 2019

In this paper three damaged exterior RC beam-column joints made of recycled aggregate concrete (RAC) were repaired. The aim of the study was to restore back the lost capacity of the beam-column joint to the original state or more. A relatively cheap material locally available galvanized steel welded wire mesh (GSWWM) of grid size 25 mm was used to confine the damaged region and then jacketed with cement mortar. Repaired specimens were also subjected to similar cyclic displacement as those of unrepaired specimens. Seismic parameters such as load carrying capacity, ductility, energy dissipation, stiffness degradation etc. were analyzed. Results show that repaired specimens exhibited better seismic performance and hence the adopted repairing strategies could be considered as satisfactory. These findings would be helpful to the field engineers to adopt a suitable rapid and cost efficient repairing technique for restoring the damaged frame structural joints for post earthquake usage.

• 콘크리트학회논문집
• /
• 제13권1호
• /
• pp.1-8
• /
• 2001

최근 프리스트레스트 콘크리트 연속 교량은 다양한 공법에 의해 시공되어지고 있으며, 특히 세스먼트로 시공되는 ILM(Incremental Launching Method)과 MSS(Movable Scaffolding System) 공법을 사용하는 경우 교량 단면에서 시공이음이 발생하게 된다. 이러한 시공이음부에서 연속적인 트리스트레스 하중을 도입하기 위해서는 텐던을 겹침이음(overlapping)하거나 텐던 커플러를 사용하는 방법이 있다. 본 연구에서는 텐던 커플러를 사용한 프리스트레스트 콘크리트 교량 부재의 텐던 접속이음에 대한 응력 상태를 구명하고자 하였으며, 이를 위해 텐던의 커플링 효과를 고려한 실험과 유한요소 해석을 수행하였다. 유한요소 해석 결과와 실험에서 얻은 접속이음부의 응력 상태는 비교적 잘 일치하는 것으로 잘 나타났으며, 텐던 커플러를 사용한 접속이음부의 응력 상태는 텐던 커플러를 사용하지 않은 경우에 비해 종방향 및 횡방향 응력 상태가 상당히 다르게 나타나고 있다. 특히 구조적으로 문제가 되는 종방향 압축응력은 접속이음부 주위에서 텐던의 접속 비율이 증가함에 따라 크게 감소하는 것으로 나타나고 있다. 이러한 텐던 접속이음부 주위에서의 종방향 압축 응력의 감소는 활하중, 온도하중 및 건조수축으로 인해 프리스트레스트 교량에 인장응력이 작용할 때 균열이 발생할 수 있는 것으로 사료된다. 본 연구에서 얻은 텐던 접속이음부에서의 응력 상태는 향후 텐던 접속이음부의 구조 거동을 평가하고, 해석 및 설계에 유용한 기초 자료를 제시하고 있다.

• 한국강구조학회 논문집
• /
• 제14권5호통권60호
• /
• pp.647-656
• /
• 2002

강교량에서 사용강재의 고강도화에 의한 구조의 경량화, 합리화는 강교량의 제작 및 가설측면에서 강교량의 경제성을 부각시키고 있다. 이러한 추세에 따라서 향후 강교량 건설에 있어서 고강도강재의 적용사례는 지속적으로 증가할 전망이다. 따라서, 교량부재에 고강도강재를 적용하기 위해서는 강재의 제작작업에서 발생하는 다양한 요인, 예를 들면 용접에 의한 용접열, 부재의 절단 및 가공에 의한 변형경화 등과 같은 강재의 용접성 및 용접이음성능을 정확하게 평가하는 것이 매우 중요하다. 따라서, 본 연구에서는 현재 국내에서 생산되고 있는 SM570, POSTEN60, POSTEN80의 조질 고강도강재를 대상으로 고강도강재의 용접에 따른 용접성 및 가공성을 조사하기 위해서 용접방법별로 최고경도시험 및 경사y형용접터짐시험을 실시하였으며, 또한, 용접이음부의 인장강도, 굽힘성, 흡수에너지 및 경도를 조사하기 위해서 일련의 용접이음시험을 실시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.12-13
• /
• 2021

Methods for the manufacture, erection, and assembly of heavy frame modules were proposed. Interferences among precast members were prevented by using bolted metal plates for dry precast beam-to-column joints during assembly with a clearance for tolerance implementing grouted concrete filler plates instead of metal filler plates. Clearances for tolerances were provided to avoid conflictions among components during erection phases. These gaps were, then, grouted by high-strength mortar. The constructability of new connections of a beam-to-column joint using bolted metal plates for precast structures was examined using a full-scale assembly test in which practical observations indicated that members could be aligned and placed accurately in both horizontal and vertical directions, leading to a fast and convenient assembling. Bolt holes of the endplate were properly aligned using couplers with 30 mm fastened length embedded in the columns. The assembly test demonstrated the erection safety and structural stability of the proposed joints that were without filler plates when they were subjected to heavy loads at the time of their erection. The facile and rapid assembly of precast beam-to-column connections with a 30 mm tolerance was observed. The proposed assembly method is rapid, sustainable, and resilient, replacing the conventional methods of concrete frame construction, offering a connection that can be used in constructing infrastructure, such as buildings and pipe-rack frames.

• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.79-83
• /
• 2010

In this study, newly developed welding consumables for EGW were welded in EH 36 TM steel plates and their welded joints were evaluated in point of mechanical properties and microstructures compared with imported consumables. Newly developed welding consumables were evaluated as good arc stability and slag fluidity, substantially the same with imported products. The tensile strength of all welded joints were sufficient to meet the requirements specified in a ship’s classification(490~640MPa) and all areas of fracture were heat affected zone(HAZ). Charpy absorbed energy values of all EG welded metals were sufficient to meet the requirements of classification(min. 34J) and those of newly developed wires were evaluated to be better than those of imported wires. As a result observing microstructures of single and tandem EG welded metals through optical and scanning electron microscope (OM&SEM), no grain boundary ferrite(PF(G)) were created in a prior austenite grain boundary and a volume fraction of a fine acicular ferrite were observed very high.

• Geomechanics and Engineering
• /
• 제6권3호
• /
• pp.263-275
• /
• 2014

The development of transportation in large cities requires the construction of twin tunnels located at shallow depth. As far as twin tunnels excavated in parallel are concerned, most of the cases reported in literature focused on considering the effect of the ground condition, tunnel size, depth, surface loads, the relative position between two tunnels, and construction process on the structural lining forces. However, the effect of the segment joints was not taken into account. Numerical investigation performed in this study using the $FLAC^{3D}$ finite difference element program made it possible to include considerable influences of the segment joints and tunnel distance on the structural lining forces induced in twin tunnels. The structural lining forces induced in the first tunnel through various phases are considerably affected by the second tunnel construction process. Their values induced in a segmental lining are always lower than those obtained in a continuous lining. However, the influence of joint distribution in the second tunnel on the structural forces induced in the first tunnel is insignificant. The critical influence distance between two tunnels is about two tunnel diameters.