• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.82-85
• /
• 2024

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.453-461
• /
• 2012

Life analysis is conducted for economic analysis of equipment or facilities. The purpose of life analysis is to predict future indicators for scrapping construction equipment, and establish and utilize a wide variety of business strategies according to data predictions. First, this study shows the methods to figure out average life, life expectancy and life prediction of construction equipment and the analysis of life making methods, using survival curves. Second, the study proposes and examines the life expectancy making model depending on revenues and expenses. The result of the study reveals that the economic life of the same equipment varies with expenses, revenues and the initial cost. The life expectancy making model for construction equipment reflects respective management status for equipment and will help efficient management for companies.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.450-453
• /
• 2008

Construction project has been changing to a huge size and speed of construction industrial environment rapidly, therefore construction stakeholder's cooperation is being important. Nowadays, BIM has been used widely to solve the problem. But, the part of equipment planning, the most important part in the actual construction, is lack of studies and information. Therefore, the purpose of this study is to analyze previous BIM tools and research a method to improve affection of information by using BIM equipment database.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.183-184
• /
• 2017

Some of the information created during the design phase of an New NPP life cycle is useful only for the execution of the construction phase; however, much of the information greatly impacts the longer-term operational phase. To most make use of design and construction information produced by data based design system during the construction and operation phase, This research is identified controlled data and drawn design information of controlled equipment from documents generated during the life-cycle stages. This study aimed to analyze related documents to assure traceability of controlled equipment from design phase through O&M and then suggested DB(Data Base) based control method on technical information of major equipment throughout nuclear power plant lifecycle.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.397-400
• /
• 2002

The purpose of this study is to analyze current status and propose improvement scheme of safety management on the heavy construction equipment operation. The research method invloves interview and questionnaire survey for the analysis of practical use status of heavy construction equipment. The results of this study are as fallows: 1) The problem of safety management status on heavy construction equipment operation is surveyed not wearing safety helmet, not keeping work regulations, and not preparing the work before start. 2) Proposed improvement scheme of safety management on heavy construction equipment operation includes strengthening 5 minutes safety education before start, strengthening safety action against falling materials, and strengthening enough preparation before start.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2001.11a
• /
• pp.14-21
• /
• 2001

Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Nevertheless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the characteristics and prediction of SIP piling noise. On the basis of measurement value, we analysed about prediction possibility of SIP piling noise by computer simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.500-505
• /
• 2000

Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Neverthless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the characteristics of attenuation and propagation of Sand Drain Method in construction field. On the basis of measurement value, we analysed about prediction possibility of Sand Drain Method. This study also present a basic data found a effective plans for Sand Drain Method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.14-15
• /
• 2019

In this paper, it was tried to prove the possibility and effect of coordinate measurement by using MEP layout equipment at the construction stage, and to propose a method to improve measurement accuracy during construction. For this study, the passenger terminal site, which is a long span structure, was selected and compared with three dimensional CAD drawings and construction measurement results using MEP layout equipment for the precise construction of long-span irregular curved roof layers. As a result, it was found that it is possible to construct three-dimensional curved roof layers using MEP layout equipment through measurement and analysis.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.273-284
• /
• 2018

3D printing technology in the construction field is currently being developed and commercialized actively in foreign countries, but the development of material and equipment is underway as an initial research stage in Korea. It is necessary to implement commercialization through the introduction of 3D printing technology in the construction field as soon as possible in Korea, but there is no guideline for suitable equipment and materials in Korea at present. Therefore, in order to help prepare for commercialization, it is necessary to provide data such as equipment size and materials suitable for commercialization at the initial stage. This study investigates the types, specifications, and applications of equipment that are being used overseas to provide the equipment type and material cost required in the initial stage of commercialization in Korea. Using the surveyed data, it was possible to calculate the advantages and disadvantages of the equipment type and specification, and the cost of materials used. As a result of the analysis, Gantry type is suitable for the domestic commercialization, and the standard of the output area is $100m^2$ and the extrusion amount of $250m^3/sec$ is proposed, and the material cost of the commercial product is 20thousand won. The suggestions in this study will help to plan the construction of products and equipments to commercialize 3D printing technology in construction field in the future.

• Korean Management Science Review
• /
• v.8 no.1
• /
• pp.41-50
• /
• 1991

Within the current construction industry, constractor equipment management practices lack structure and often are not addressed through an economic analysis and evaluation process. This paper explores two areas...cost of capital and inflation...with the intention of providing insight for a more structured and economic based approach to contractor equipment replacement practices rather than by the traditional "rule of thumb".umb".uot;.