• 한국환경복원기술학회지
• /
• 제16권4호
• /
• pp.99-114
• /
• 2013

In this study, constructability of ecologocal stream restoration process was evaluated and improved approaches for habitat were suggested. The study site is Gucheon River in Geoje city where conducted ecologocal restoration work within maintaining its flood control function. Application of ecological design factors and constructability in the process from planning to construction was analyzed and its results are as follows: In the process of planning and designing, it was focused more on the naturality of Gucheon River rather than the human convinience and ecological design factors were applied within the ecological capacity of the site. First, the indexes for constructability evaluation is selected. It was classified into three major categories as construction quality, design quality and construction administration system. Each index has details, so there are twenty sub indexes for contractibility evaluation. Second, the evaluation results shows that the index most in need of improvement was plumbing construction, followed by Stone construction and pavement construction. design concept was evaluated as appropriate in entire categories. Finally it is suggested that it can be improved in both process of design to enhance the technology and process of construction to enhance the quality management. The constructability of ecological stream needs adaptive management and it must be discussed with its designing which is at the stage before construction. Also it needs discussion with its designer constantly and feed-back process.

• 한국건설관리학회논문집
• /
• 제9권3호
• /
• pp.65-74
• /
• 2008

국내 건설산업의 공공 발주자는 사업의 초기단계의 사업비관리에 대한 중요성을 충분히 인식하고 있음에도 불구하고 체계화된 공사비 산정시스템을 보유하고 있지 못한 실정이다. 이에 신규 공공 건설공사를 기획하고 사업비를 책정하는 단계에서는 예산을 수립하는 담당자가 기존의 실적데이터와 경험을 바탕으로 공사비를 추정하고 있으며, 기본설계단계와 실시설계단계 이후 산정된 공사비를 책정된 예산과 비교 후 사업의 추진여부를 검토하거나 설계내용을 예산에 맞도록 변경하고 있다. 이에 본 연구에서는 공공아파트의 사업초기단계에서 공사비를 산정할 수 있는 공공아파트 계획설계단계에서의 공사비 예측모델을 개발하고자 하였다. 본 연구의 결과를 바탕으로 계획설계단계에서 공사비를 예측하고 사업비 및 전반적인 설계를 관리한다면 지금보다 더 효율적인 방법으로 국가의 재원을 적절하게 책정하고 집행할 수 있을 것으로 판단된다.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.437-443
• /
• 2013

Recently, sustainable building design, a growing field within architectural design, has been emerged in the construction industry as the practice of designing, constructing, and operating facilities in such a manner that their environmental impact, which has become a great concern of construction professionals, can be minimized. A number of different green rating systems have been developed to help assess that a building project is designed and built using strategies intended to minimize or eliminate its impact on the environment. In the United States, the widely accepted national standards for sustainable building design are known as the LEED (Leadership in Energy and Environmental Design) Green Building Rating System. The assessment of sustainability using the LEED green rating system is a challenging and time-consuming work due to its complicated process. In effect, the LEED green rating system awards points for satisfying specified green building criteria into five major categories: sustainable sites, water efficiency, energy and atmosphere, materials and resources, and indoor environmental quality; and sustainability of a project is rated by accumulating scores (100 points maximum) from these five major categories. The sustainability rating process could be accelerated and facilitated by using computer technology such as BIM (Building Information Modeling), an innovative new approach to building design, engineering, and construction management that has been widely used in the construction industry. BIM is defined as a model-based technology linked with a database of project information, which can be accessed, manipulated, and retrieved for construction estimating, scheduling, project management, as well as sustainability rating. This paper will present a framework representing the building knowledge contained in the LEED green building criteria. The proposed building knowledge framework will be implemented into a BIM platform (e.g. Autodesk Revit Architecture) in which sustainability rating of a building design can be automatically performed. The development of the automated sustainability rating system and the results of its implementation will be discussed.

• 국제초고층학회논문집
• /
• 제8권3호
• /
• pp.211-220
• /
• 2019

Three cases of supertall connected structures are presented and each of them represents a quite style. The first case is a strong-connected structure. The coupling function of towers and connector contributes a lot to the structural stiffness and stability. Its special construction scheme had great impact on the construction quality and the structural safety, and must be accurately considered. For the second case which is a weak-connected structure, the influences of different connecting modes to the structural dynamic characteristic were explained. Then the combined bearings were proposed to achieve the design presume. In the third case which represents the multi-supported structures, the structural distinctive mechanical properties were discussed. For the structural state during construction process is quite different from that in final service condition, two construction procedures were simulated to get an optimal one. Although there are great challenges to designers, the advantages of the supertall connected buildings are obvious. Further work is needed in this area to adapt to the development of future cities.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1990년도 PROCEEDINGS OF THE FIRST KOREA-JAPAN JOINT GEOTECHNICAL SEMINAR ON EXCAVATION and TUNNELING IN URBAN AREAS
• /
• pp.87-96
• /
• 1990

Even though the number of construction cases of temporary retaining structures in urban area are increasing, there still are many problems to be solved in design and construction of temporary retaining structures. In this paper the current design methods are reviewed and their problems are analyzed. Some critical mistakes made by site technicians and engineers are also discussed.

• 호남수학학술지
• /
• 제24권1호
• /
• pp.109-119
• /
• 2002

Some sufficient conditions on the existence and uniqueness of certain symmetric balanced incomplete block design are introduced. Also, a construction algorithm for the design and some examples are presented. The algorithm is developed based on the construction of subspaces of the three-dimensional vector space over a field.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2004년도 제5회 정기학술발표대회 논문집
• /
• pp.242-245
• /
• 2004

공공 건설사업 발주 정책의 변화 및 대형화, 복잡화되고 있는 건축 프로젝트의 특성에 따라 향후 건설시장은 디자인 빌드 방식의 건설사업이 더욱 증가할 것으로 예상된다. 그러나 디자인 빌드의 증가와 더불어 운영관리 측면에서의 문제점이 나타나고 있다. 디자인 빌드 방식은 일괄사업자가 설계와 시공에 대한 책임을 전담하게 되므로 많은 리스크 요인이 존재하며, 기본설계에서 실시설계를 거쳐 시공단계에 이르는 업무 프로세스가 명확히 규명되어 있지 않아 사업의 진행에 따른 사업 수행자의 일관되고 체계적인 관리가 어려운 실정이다. 이에 본 연구에서는 디자인 빌드 프로젝트의 효과적인 수행을 위한 프로세스 모델을 개발하고, 관련지식의 체계적인 축적 및 활용을 위한 데이터베이스의 구축방안을 제시하고자 한다.

• 한국건설관리학회논문집
• /
• 제6권1호
• /
• pp.109-116
• /
• 2005

공공 건설사업 발주 정책의 변화 및 대형화, 복잡화되고 있는 건축 프로젝트의 특성에 따라 향후 건설시장은 디자인 빌드 방식의 건설사업이 더욱 증가할 것으로 예상된다. 그러나 디자인 빌드의 증가와 더불어 운영관리 측면에서의 적지 않은 문제점이 나타나고 있다. 디자인 빌드 방식은 일괄사업자가 설계와 시공에 대한 책임을 전담하게 되므로 많은 리스크 요인이 존재하며, 기본설계에서 실시설계를 거쳐 시공단계에 이르는 업무 프로세스가 명확히 규명되어 있지 않아 사업의 진행에 따른 사업수행자의 일관되고 체계적인 관리가 어려운 실정이다. 이에 본 연구에서는 디자인 빌드 프로젝트의 효과적인 수행 및 관리를 지원하기 위한 프로세스 모델을 개발하고, 관련지식의 체계적인 축적 및 활용을 위해 디자인 빌드 프로젝트의 데이터베이스 구축 및 활용 방안을 제시하고자 한다.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제1호
• /
• pp.213-218
• /
• 2001

To many developing countries like China, the practical way to constant development of city construction is low consuming. The basic methods of low-cunsuming landscape construction: 1) Low building consumption: Decreasing construction quantity. Using low-costing material. Designing low-consuming landscape. Reusing of building material. 2) Low energy consumption: Decreasing water consumption. Consuming and enrichment of earth fertilizer. Decreasing electrical consumption. 3) Low maintenance: Adapting natural material. Using local plants. Special design to decrease maintaining. Because of many reasons, China has not yet adapting Low-consuming Landscape Construction.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.417-423
• /
• 2007

This paper describes how using the XPS Document technologies of Windows Vista support and enhances interactions with the structural design and construction process. It illustrates the document workflows and the document life cycle in a typical construction base knowledge system. It provides engineers and decision makers and implementers with information about this new technology and how they can apply it to their design and construction models. The paper also highlights opportunities for the new format of data exchange in the recent efforts to develop National Management System Standards for Transportation Applications to benefit from these emerging technologies.