• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1123-1140
• /
• 2019

Many Internet of Things (IoT) applications involving bursty traffic have emerged recently with event detection. A power management scheme qualified for uplink bursty traffic (PM-UBT) is proposed by distinguishing between bursty and general uplink traffic patterns in the IEEE 802.11 standard to balance energy consumption and uplink latency, especially for stations with limited power and constrained buffer size. The proposed PM-UBT allows a station to transmit an uplink bursty frame immediately regardless of the state. Only when the sleep timer expires can the station send uplink general traffic and receive all downlink frames from the access point. The optimization problem (OP) for PM-UBT is power consumption minimization under a constrained buffer size at the station. This OP can be solved effectively by the bisection method, which demonstrates a performance similar to that of exhaustive search but with less computational complexity. Simulation results show that when the frame arrival rate in a station is between 5 and 100 frame/second, PM-UBT can save approximately 5 mW to 30 mW of power compared with an existing power management scheme. Therefore, the proposed power management strategy can be used efficiently for delay-intolerant uplink traffic in event-driven IoT applications, such as health status monitoring and environmental surveillance.

• IE interfaces
• /
• v.14 no.4
• /
• pp.334-340
• /
• 2001

The theory of constraints (TOC) has become a valuable system in modern operations management. Using the ideas and methods of the TOC, companies can achieve a large reduction of work-in-process and finished-goods inventories, significant improvement in scheduling performance, and substantial earnings increase. The purpose of this paper is to calculate the optimal size of the time buffer which is used to accommodate disruptions in production processes and provide maximum productivity of capacity constrained resources. After the problem formulation in terms of single server queueing model, we observed the system behavior by sensitivity analyses.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.476-480
• /
• 2002

The theory of constraints (TOC) has become a valuable system in modern operations management. Using the ideas and methods of the TOC, companies can achieve a large reduction of work-in-process and finished-goods inventories, significant improvement in scheduling performance, and substantial earnings increase. The purpose of this paper is to calculate the optimal size of the time buffer which is used to accommodate disruptions in production processes and provide maximum productivity of capacity constrained resources. After the problem formulation in terms of single server queueing model, we observed the system behavior by sensitivity analyses.

• Journal of KIISE:Information Networking
• /
• v.31 no.1
• /
• pp.91-100
• /
• 2004

This paper presents a receiver-driven TCP flow control mechanism, which is adaptive to the wireless condition, for memory constrained mobile receiver. A receiver-driven TCP flow control is, in general, achieved by adjusting the size of advertised window at the receiver. The proposed method constantly measures at the receiver both the available wireless bandwidth and the packet round-trip time. Depending on the measured values, the receiver adjusts appropriately the size of advertised window. Constrained by the adjusted window which reflects the current state of the wireless network, the sender achieves an improved TCP throughput as well as the reduced round-trip packet delay. Its implementation only affects the protocol stack at the receiver and hence neither the sender nor the router are required to be modified. The mechanism has been implemented in real environments. The experimental results show that in CDMA2000 1x networks the TCP throughput of the proposed method has improved about 5 times over the conventional method when the receiver's buffer size is limited to 2896 bytes. Also, with 64Kbytes of buffer site, the packet round-trip time of the proposed method has been reduced in half, compared the case with the conventional method.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.647-656
• /
• 2001

Video delivery from a server to a client across a network system is an important part of many multimedia applications. Usually, the network system has constraint in both the amount of network bandwidth and the buffer size in the client. While delivering a video stream across such a constrained network system, loss of frames may be unavoidable. The system resources consumed by the dropped frames are wasted, and the losses of frames would result in discontinuous display at the client. In this paper, for delivering hierarchically encoded video stream, we introduce the notion of selective layer discard algorithm at the server which not only preemptively discards data at the server but also drops less important part of a frame instead of the entire frame. By the simulation, we compare the proposed selective layer discard algorithm and the existing selective frame discard algorithm. The simulation results show that the proposed algorithm may improve the quality of decoded video, and decrease the replay discontinuity at the client.

• Journal of the Korea Society for Simulation
• /
• v.22 no.3
• /
• pp.35-41
• /
• 2013

This paper applies an active period based bottleneck detection method to flow shop manufacturing system with limited buffer size. Manufacturing systems are constrained by one or more bottlenecks which degrades the system throughput. Conventional bottleneck detection methods include the waiting time or queue length of production stations and their utilization. Due to the random events such as production time of items, machine failure and repair times, the systems may change over time, and subsequently bottlenecks shift from one station to another station. Active period of working station may cause other stations to wait for productions. Information when and where active periods occur helps to find bottlenecks in production systems. Based on these informations, we predict bottlenecks in applying AweSim simulation language. We compare the simulation results of conventional methods with those obtained from duration of active period method, and duration ratio method of both sole and shift bottleneck periods. Even though simulation results are from simple flow shop model, they are quite promising for predicting bottlenecks of production stations. We hope this study aids in decision making regarding the improving system production yield and allocation of available resources of system.