• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.29-36
• /
• 2003

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at spark plug and the combustion characteristics of inhomogeneous charge methane-air mixture under several parameters. The flow characteristics such as mean velocity and turbulence intensity was analyzed by hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer was used to investigate the effect of initial charge pressure, excess air ratio and ignition times on combustion pressure and combustion duration. Mean velocity and turbulence intensity had the maximum value at 200 or 300ms and then decreased to beneath 0.05m/s gradually at 3 seconds. Second mixture is accompanied by an increase in the combustion rate, and that the higher the mass which is added in the second stage injection, the faster the burn rate.

• International Journal of Automotive Technology
• /
• 제6권2호
• /
• pp.79-85
• /
• 2005

This work is to investigate the surface heat flux and combustion characteristics of premixed propane mixture in a constant volume chamber. The experiment of heat flux and combustion characteristics of premixed propane mixture are performed with various equivalence ratio and initial pressure conditions. Based on the experimental results, it is found that the maximum instantaneous temperature is increased with the increase of initial pressure in the chamber. There are significant differences in the burning velocity of premixed propane mixture at different measuring points in the constant volume combustion chamber. A]so, the trends of temperature difference at each measuring points are similar to the burning velocity in the combustion chamber. It is concluded that the total heat loss during the combustion period is affected by the equivalence ratio and the initial condition of fuel-air mixture.

• 한국컴퓨터정보학회논문지
• /
• 제18권9호
• /
• pp.71-78
• /
• 2013

본 논문에서는 골프채 헤드가 골프공을 일정속도로 움직여 치고 난 후 골프채의 헤드는 같은 방향으로 일정 속도로 움직일 때 골프공을 치고 날아가는 골프공의 속도를 구한다. 골프공을 치기 전의 속도가 각각 다를 경우의 골프공의 속도를 각각 구한다. 골프를 칠 때 헤드의 속도, 골프공의 질량, 임팩트, 임팩트후의 날아가는 속도, 그리고 임팩트 후의 이동 방향 등을 쉽게 알아보도록 하는 것이 본 논문의 목적이다. 실험 결과는 표와 그림으로 자세히 나타나 있고 본 연구와 기존 연구와의 비교 평가 결과와 시사점 및 향후 연구 방향도 제시하였다. 본 연구 결과는 다른 연구와 달리 몇 가지 요소들의 측정으로 우수하게 골프공의 속도를 측정함을 알 수 있다.

• 한국환경과학회지
• /
• 제25권4호
• /
• pp.491-504
• /
• 2016

This study, examines the flow characteristics of upstream channel depending on water gate operation of Nakdan Multi-fuctional weir. The specific purpose of this study are to simulate the variation of flow velocity depending on the operation of the weir using 1-dimensional hydraulic model, HEC-RAS, and compare it with observed velocity. For discharge conditions from $50m^3/s$ to $3,500m^3/s$, it is observed that the velocity of upstream channel is almost constant, whereas for probability flood discharge, the velocity and froude number are increased as the discharge values are increased. The velocity values for downstream boundary condition EL, 40.0 m are more decreased than those for EL. 40.5m. From comparison on the variation of water stage depending on water gate operation, it is observed that the stage values are almost constant for discharges below $300m^3/s$, whereas 5 cm to 20 cm for discharges over $700m^3/s$. Flow velocity at streamflow gauging station. Nakdong, is decreased by more than 875% after installing the weir. The results obtained from this study indicate that the velocity of upstream channel is decreased and the discharge and velocity of downstream channel are significantly varied after installing the weir.

• 지구물리와물리탐사
• /
• 제10권4호
• /
• pp.393-398
• /
• 2007

흑색 셰일이 존재하는 지역에서 탄성파 주시 토모그래피 탐사를 수행하였다. 흑색 셰일은 퇴적암 기원으로 속도 이방성을 가지는 것으로 알려져 있기 때문에, 주시 토모그래피를 적용하여 정확한 역산 모형을 도출하기 위하여 이방성을 역산 과정에 적용하였다. 속도 이방성 계수는 탐사에서 획득한 자료에 대하여 탄성파의 초동시간에 의한 직선파선으로 가정한 속도와 전파각이 형성하는 이방성 타원의 형태로부터 추출할 수 있었으며, 이로부터 수평방향의 전파속도가 수직방향의 전파속도보다 빠름을 확인할 수 있었다. 속도 이방성 계수는 역산 과정에 적용되어 실제 지질구조에 부합하는 속도 구조를 획득하였다. 속도 이방성을 고려한 역산은 동일한 지역에서 3개의 구간에서 수행하였고, 각각의 결과는 지표지질 및 시추결과와 비교하여 높은 유사성을 보여주었다.

• 대한의용생체공학회:의공학회지
• /
• 제4권1호
• /
• pp.15-20
• /
• 1983

In this paper, the velocity characteristics of the vertical saccadic eye movement system with subject-experiment are investigated utilizing the infra-red methed. Especially, target-generation system which produces pseudo-random signals using EPROM 2716 and differentiator whose time constant is 12 msec are developed in hardware.

• 제어로봇시스템학회논문지
• /
• 제3권2호
• /
• pp.132-138
• /
• 1997

Six different types of velocity profiles of trolley movement of a container crane are investigated for the minimal sway angle at the target trolley position. Three velocity patterns which include trapezoidal, stepped and notched-type velocity patterns are obtained assuming constant rope length. The notched type velocity pattern is shown to be derived from the time-optimal bang-bang control. The stepped type velocity pattern can be shown to be derived as bang-off bang control as well. Considering the damping effect due to hoist motion a double stage acceleration pattern is also analyzed. The main objective of the paper is to show how much time-reduction can be obtained among several velocity patterns appearing in the literature.

• 한국환경과학회지
• /
• 제3권1호
• /
• pp.49-56
• /
• 1994

Effect of the liquid circulation velocity on the biofilm development was investigated in an inverse fluidized bed biofilm reactor(IFBBR). To observe the effect of the influent COD concentration on biofilm simultaneously, the influent COD value was adjusted to 1000mg/1 f for 1st reactor, and 2500mg/l for 2nd reactor. The liquid circulation velocity was adjusted by controlling the initial liquid height. As the liquid circulation velocity was decreased, the settling amount of biomass was increased and the amount of effluent biomass was decreased. Since the friction of liquid was decreased by the decrease of liquid circulation velocity, the biofilm thickness was increased and the biofilm dry density was decreased. In the 1st reactor the SCOD removal efficiency was constant regardless of the variation of the liquid circulation velocity, but it was increased by the decrease of the liquid circulation velocity because of more biomass population in 2nd reactor.

• Composites Research
• /
• 제27권2호
• /
• pp.42-46
• /
• 2014

본 연구에서는, 발포 폴리프로필렌의 충격에너지 흡수특성이 충격체 질량과 속도중 어느 변수에 더 많은 영향을 받는 지 고찰해 보기 위하여, 충격체 질량과 속도에 변화를 주어 5개의 조합을 만들고, 이 조합들이 동일한 초기 충격에너지 조건(100 J 및 200 J)이 될 수 있도록, 값을 선정한 뒤, 충격시험을 수행하여, 충격에너지 흡수특성을 실험적으로 규명하였다. 또한 발포 폴리프로필렌의 기본적인 특성을 파악하기 위하여, 준정적 시험(Quasistatic test)도 수행되었다. 준정적 시험은 MTS 858을 이용하였고, 충격시험을 위해, Instron dynatup 9250 HV가 사용되었다. 충격시험결과, 발포 폴리프로필렌은 충격체 속도에 비해 질량에 더 많은 영향을 받는 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.105-112
• /
• 2013

In this paper, EV (Electric Vehicle) and ICE (Internal Combustion Engine) vehicle simulators are developed to compare maximum driving range of EV and ICE vehicle according to different driving patterns. And, simulations are performed for fourteen constant velocity cases (20, 30, 40, ${\ldots}$, 150 km/h) and four different driving cycles. From the simulation results of constant velocity, it is found that the decreasing rate of maximum driving range for EV is larger than the one for ICE as both the vehicle velocity and the driving power increase. It is because the battery efficiency of EV decreases as both the velocity and the driving power increase, whereas the engine and transmission efficiencies of ICE vehicle increase. From the results of four driving cycle simulation, the maximum driving range of EV is shown to decrease by 50% if the average driving power of driving cycle increases from 10 to 20kW. It is because the battery efficiency decreases as the driving power increases. In contrast, the maximum driving range of ICE vehicle also increases as the average driving power of driving cycle increases. It is because the engine and transmission efficiencies also increase as the driving power increases.