• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.447-449
• /
• 1999

In this paper, we were evaluated dielectric properties and temperature dependency in aging semifilm and PET film. According to humidity, dielectric properties of PET film increased, but tan $\delta$ presented a constant transition. According as temperature increased, tan $\delta$ increased from 1.9$\times$10$^{-3}$ to 2.76$\times$10$^{-3}$ and capacitance increased from 244.1(PF) to 297.5(PF).

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.5
• /
• pp.694-699
• /
• 2009

The present study was conducted to evaluate the effect of chilled drinking water on the productivity of laying hens under constant high ambient temperature. A total of seventy-two, 123-day-old Hy-line brown layers was divided into two equal groups. The first group (UDWG) was given unchilled water ($23.0{\pm}2.5^{\circ}C$) as a control, and the second group (CDWG) was given chilled water ($16.0{\pm}0.5^{\circ}C$). The laying hens were kept at $30^{\circ}C$ constant temperature with 50% relative humidity and were exposed to 17 h of light per day. Feed intake, egg production, egg quality (egg weight, shell weight, shell thickness, egg color, yolk color, and Haugh unit), and blood samples were collected and analyzed. The results showed that the feed intake of CDWG laying hens was significantly higher (11.64%) than the UDWG counterparts (p<0.01). Egg production of CDWG was also significantly higher (11.27%) than the UDWG counterparts (p<0.001). Furthermore, we observed that the CDWG laying hens had significantly higher (11.72%) levels (p<0.10) of blood calcium, with a corresponding value of 21.92 mg/dl compared to the UDWG hens (19.62 mg/dl). The higher calcium concentration in the CDWG animals may contribute to increased egg production. The CDWG laying hens also contained higher (12.53%) phosphorus concentrations in blood compared to the UDWG (4.22 mg/dl vs. 3.75 mg/dl), although not statistically different (p>0.10). Egg weight and egg quality were not affected by chilled drinking water. In conclusion, providing chilled drinking for laying hens under high ambient temperature improved feed intake and egg production.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.63-80
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.41-51
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.37-42
• /
• 1999

The equilibrium moisture content(EMC) of Shiitake mushroom is and important factor because it has a close relationship to storage and drying problems. The determination of the EMC for Shiitake mushroom was made in atmospheres of various constant humidities at four different constant temperatures and the fitting of the five selected EMC models were performed with the experimental EMC data. The desorption equilibrium moisture contents for Shiitake mushroom were increased as the temperature was decreased and the relative humidity was increased. The significant difference of the equilibrium moisture content was appeared between the cap and the stipe of Shiitake mushroom. The Henderson-Thompson model was fitter than the others with the experimental data.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.265-269
• /
• 2005

Cox's proportional hazards model (PHM) has been widely applied in the analysis of lifetime data, and it can be characterized by the baseline hazard function and covariates influencing systems' lifetime, where the covariates describe operating environments (e.g. temperature, pressure, humidity). In this article, we consider the constant baseline hazard function and a discrete random variable of a covariate. The estimation procedure is developed in a parametric framework when there are not only complete data but also incomplete one. The Expectation-Maximization (EM) algorithm is employed to handle the incomplete data problem. Simulation results are presented to illustrate the accuracy and some properties of the estimation results.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.357-364
• /
• 2016

Purpose: This study was performed to define the drying characteristics of sorghum by developing thin layer drying equations and evaluating various grain drying equations. Thin layer drying equations lay the foundation characteristics to establish the thick layer drying equations, which can be adopted to determine the design conditions for an agricultural dryer. Methods: The drying rate of sorghum was measured under three levels of drying temperature ($40^{\circ}C$, $50^{\circ}C$, and $60^{\circ}C$) and relative humidity (30%, 40%, and 50%) to analyze the drying process and investigate the drying conditions. The drying experiment was performed until the weight of sorghum became constant. The experimental constants of four thin layer drying models were determined by developing a non-linear regression model along with the drying experiment results. Result: The half response time (moisture ratio = 0.5) of drying, which is an index of the drying rate, was increased as the drying temperature was high and relative humidity was low. When the drying temperature was $40^{\circ}C$ at a relative humidity (RH) of 50%, the maximum half response time of drying was 2.8 h. Contrastingly, the maximum half response time of drying was 1.2 h when the drying temperature was $60^{\circ}C$ at 30% RH. The coefficient of determination for the Lewis model, simplified diffusion model, Page model, and Thompson model was respectively 0.9976, 0.9977, 0.9340, and 0.9783. The Lewis model and the simplified diffusion model satisfied the drying conditions by showing the average coefficient of determination of the experimental constants and predicted values of the model as 0.9976 and Root Mean Square Error (RMSE) of 0.0236. Conclusion: The simplified diffusion model was the most suitable for every drying condition of drying temperature and relative humidity, and the model for the thin layer drying is expected to be useful to develop the thick layer drying model.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.26 no.2
• /
• pp.124-130
• /
• 2013

Bumblebees are widely used to pollinate various greenhouse crops. Among the different bumblebee species, Bombus ignitus is indigenous to Korea, China, Japan and Russia. B. ignitus undergoes one generation per year, and artificial hibernation is essential for year-round rearing of the bumblebee. Keeping the queens under low-temperature conditions for several months is an effective method for terminating their diapause and promoting colony development. In the present study, we investigated how cold temperature affects the artificial hibernation of B. ignitus queens. Under chilling temperatures of $-2.5^{\circ}C$, $0^{\circ}C$, $2.5^{\circ}C$ and $5^{\circ}C$ with constant humidity >80%, the queens stored at $2.5^{\circ}C$ exhibited the highest survival rates, which were 74.0% at one month, 67.0% at two months, 60.0% at three months, 46.0% at 4 months, 33.0% at 5 months and 24.0% at 6 months. Lower survival rates were observed at $0^{\circ}C$, $5^{\circ}C$, $7.5^{\circ}C$ and $12.5^{\circ}C$. At $2.5^{\circ}C$ the colony developmental characteristics after diapause were 1.2- to 1.5-fold greater than those when queens were stored at $5^{\circ}C$. Thus, $2.5^{\circ}C$ and 70% R.H. were the most favorable chilling temperature and humidity conditions for terminating the diapause of B. ignitus queens.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.1 s.19
• /
• pp.73-77
• /
• 2006

Drying Shrinkage has much complexity as it has relations with both internal elements of concrete and external factors. Therefore, experiments on Concrete Drying Shrinkage are carried out in this study under simplified circumstances applying temperature & Humidity test chamber which enables constant temperature and humidify. Comparative analyses have been made respectively according to the consequences aiming at modelling for prediction of Concrete Drying Shrinkage and making out measures to reduce it. As a result Strain Rate of Drying Shrinkage of concrete was measured to increase by average $10{\times}10^{-5}$ in proportion to additional 4% increase in fine aggregate ratio, when water/cement ratio constant. Strain Rate of Drying Shrinkage in pit sand concrete increased 20% higher than measured when in river sand under the condition of 90-day material age. 6. Strain Rate of Drying Shrinkage in sea sand concrete increased $10%{\sim}15%$ higher than measured when in river sand. The results of prediction of Rate of Drying Shrinkage by Response Surface Analysis are as fellows. The coefficient of correlation of Drying Shrinkage in concrete was over 90%.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.2
• /
• pp.128-136
• /
• 2008

It is necessary to estimate the cooling load of the next day for effective control of ice thermal storage system. In this paper, new methodology is proposed to estimate the cooling load using design parameters of building and predicted weather data. Only six input parameters such as sensible heat coefficient and constant, latent heat coefficient and constant, maximum and minimum temperature are necessary to obtain hourly distribution of cooling load for the next day. Two benchmarking buildings(hospital and research institute) are selected to validate the performance of the proposed method, and the estimated cooling loads in hourly and daily bases are calculated and compared with the measured data for E hospital. The estimated results show fairly good agreement with the measured data for both buildings.