• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.345-348
• /
• 1999

The monolayer behaviors at the air-water interface and the dielectric properties of MI-0 LB films for complex concentration were investigated by the surface pressure-area ($\pi$-A) isotherms and dielectric constant. The molecular area was expanded with increase of metal ions concentration. It is considered that the expansion of molecular area is due to electrostatic repulsion between the polymer chains andhydrophobic increase of ionic strength. In the frequency-dependent complex dielectric constant at room temperature, the real part of dielectric constant($\varepsilon'$) is about 6.0~10.0 in the low-frequency range and is decreasing slowly upto $1O^4$Hz. It decreased abruptly near $1O^5Hz$. It seems to be dielectric dispersion in this frequency range. Also, the imaginary part of dielectric constant ($\varepsilon"$) shows a peak in $1O^5$~$1O^6Hz$. It seems to be dielectric absorption in this frequency range.ange.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.79-84
• /
• 2000

Crack closure and growth behavior of physically short fatigue cracks under random loading are Investigated by performing narrow- and wide-band random loading tests for various stress ratios. Artificially prepared two-dimensional, short through-thickness cracks are used. The closure behavior of short cracks under random loading is discussed, comparing with that of short cracks under constant-amplitude loading and also that of long cracks under random loading. Irrespective of random loading spectrum or block length, the crack opening load of short cracks is much lower under random loading than under constant-amplitude loading corresponding to the largest load cycle in a random load history, contrary to the behavior of long cracks that the crack opening load under random loading is nearly the same as or slightly higher than constant-amplitude results. This result indicates that the largest load cycle in a random load history has an effect to enhance crack opening of short cracks.

• 대한수학회보
• /
• 제56권4호
• /
• pp.841-852
• /
• 2019

We establish the generalized Myers theorem for Finsler manifolds under integral Ricci curvature bound. More precisely, we show that the forward complete Finsler n-manifold whose part of Ricci curvature less than a positive constant is small in $L^p$-norm (for p > n/2) have bounded diameter and finite fundamental group.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2939-2942
• /
• 2003

A new contactless Li-ion battery charging system was proposed. The conventional methods for charging Li-ion battery have some weak points. For example, there can be a contact failure, a poor waterproof, and a difficulty to standardize the battery charging systems. The new proposed system can overcome these weak points. The new charging system is composed of power transfer part and data transfer part. This paper focuses on the power transfer part for contactless battery charging. The power stage is mainly composed of PPRC(Push-pull Parallel Resonant Converter) and flyback converter. The new method of chaging Li-ion battery was proposed and PPRC + flyback-boost topology was analyzed. The proposed toplogy was tested under the constant voltage control and the constant current control which are adequate for charging Li-ion battery.

• 반도체디스플레이기술학회지
• /
• 제3권1호
• /
• pp.1-7
• /
• 2004

In this paper, we have developed the DC parameters test system which inspects the properties of DC parameters for semiconductor products. The developed system is interfaced by IBM-PC. It is consisted of CPLD part, ADC(Analog-to-Digital Converter), DAC(Digital-to-Analog Converter), voltage/current source, variable resistor and measurement part. In the proposed system, we have designed the constant voltage source and the constant current source in a part. In the comparison of results, the results of the simulation are very similar to the ones of the implementation.

• 지질공학
• /
• 제13권4호
• /
• pp.405-418
• /
• 2003

지반을 구성하고 있는 매질에 대한 체적함수비 및 포화 정도를 측정하는 것은 지반의 물리적 성질, 강우에 의한 지하수 함량 및 자연 사면 파괴를 이해하는데 매우 중요한 요소 중의 하나이다 이러한 지반의 요소들을 파악하기 위해 전자기파를 이용한 유전율법은 지반의 유전율상수의 특성에 따라 평가되어 지므로 다양한 분야에 적용되고 있다. 본 연구에서는 전자기파의 측정 주파수 범위 1 - 18 GHz를 사용하는 유전율 시스템인 FDR-V (Frequency domain reflectometry with vector network analyzer)를 적용하여 1 GHz와 18 GHz에서의 두 주파수 범위에 대한 표준사 (Standard sand)와 화강풍화토 (Granitic weathered soil)의 밀도, 온도 및 염분농도 의존성에 따른 유전율상수의 반응에 대해 검토하였다. 실험결과에서, 흙의 밀도 의존성은 체적함수비의 증가에 따라 유전율상수도 증가하는 것으로 측정되었으나, 이들의 밀도 의존성은 다소 낮은 것으로 판단된다. 그리고, 1 GHz 실수부 (Real part)에 대한 온도 의존성 실험에서는 온도의 증가에 따라 물과 표준사의 유전율상수는 점진적으로 감소하는 경향을 보이나 에탄올의 유전율상수는 증가하는 것으로 측정되었다. 따라서, 온도 변화에 따른 각 매질의 유전율상수는 측정 온도에 대한 영향을 고려하여야 한다. 염분농도에 따른 유전율상수의 변화는 1 GHz 허수부 (Imaginary part)에서 염분농도의 증가에 따라 유전율상수의 측정치도 함께 증가하는 것으로 나타났다. 이상과 같이, 다양한 조건하에 대한 유전율상수의 의존성들을 기초로 하여 다공질 매질의 특성을 파악하기 위한 FDR-V 시스템의 적용성을 충분히 검토하였다. 결론적으로, 본 연구에서는 1 GHz의 측정 주파수범위 내에서 다공질 매질의 염분오염도를 충분히 정량적으로 측정할 수 있는 것으로 생각된다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.289-292
• /
• 2003

Laboratory tests were performed to investigate the dielectric property of saturated sands contaminated by heavy metals solution at low frequency. Differences of contamination and the real part of dielectric constant depend on heavy metal concentration was measured at low frequency, 100KHz below. The optimal frequency to develop the detection potentials of monitoring was 1KHz, 10KHz, 100KHz. At this frequency, Heavy metal contamination of saturated sands contamination can be recommended by analysis of complex dielectric constant.

• Clinics in Shoulder and Elbow
• /
• 제3권1호
• /
• pp.20-25
• /
• 2000

Purpose : To evaluate functional results and study factors influencing results after humeral hemiarthroplasty for comminuted fractures of the proximal humerus. Materials and Methods: We reviewed 12 patients with average follow-up period of 23 months(12 to 42). The proximal humeral fractures consisted of one anatomical neck fracture, five three-part and six four-part fractures or fracture-dislocations. Constant score and Compito et al' evaluation system were used for clinical assessment. Statistical analysis was done with the Wilcoxon test. Results: Six cases of anatomical neck, three-part fractures or fracture-dislocations showed 61 points on the average Constant score and three unsatisfactory results on the Compito et al' evaluation; Six of four-part fractures or fracture-dislocations showed 51 points and three unsatisfactory results. There were 59(two unsatisfactory) for five non-associated dislocation and 53(four unsatistactory) for seven associated dislocation; 66(one unsatisfactory) for three under 60 years and 41(five unsatisfactory) for nine over 60 years; 67(two unsatisfactory) for seven tuberosity union and 41(four unsatisfactory) for five tuberosity non-union or resorption; 58(four unsatisfactory) for ten early operation within two weeks and 43(all unsatisfactory) for two delayed operation; and 18(unsatisfactory) for one case of a accompanied rotator cuff tear. Conclusion: We concluded that tuberosity union was important factor influencing the results. Also, we thought that age, timing of operation and accompanied rotator cuff tear could be influenced to results.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권3호
• /
• pp.236-245
• /
• 2017

Purpose: There is no established inspection system for composite wind blade during the fabrication stage even though the blades are one of the most important part at wind generation system, but phased array ultrasonic testing method has been continuously studied about wind turbine blade with composite. When wind turbine blade with complex shape by phased array probe is inspected, it is necessary to study for system keeping constant pressure using pressure device. Methods: In this paper, we propose constant pressure device for inspecting wind turbine blade by phased array ultrasonic test method. Design of the device controller is based on Hunt-Crossley model. We evaluate reliability of phased array ultrasonic inspection result that applicated constant pressure device. Result: Defect indication is precise and its error is small when constant pressure mechanism based on Hunt-Crossley model was used. Conclusion: When inspection is progressed using constant pressure mechanism, the reliability of composite wind blade inspection can be improved.

• 한국추진공학회지
• /
• 제21권5호
• /
• pp.97-107
• /
• 2017

데토네이션을 이용한 유체역학적 정적연소 기술은 현재의 정압연소 시스템의 효율 및 성능 한계를 극복할 수 있는 획기적 미래 추진 기술로 주목받고 있다. 지난 수년간 RDE의 기초적인 작동 실험과 CFD를 이용한 이론 분석 등 수많은 연구가 진행되었다. 본 논문에서는 아직 부족한 국내 RDE 연구에 참고가 되고자하는 목적으로 근래의 세계 각지에서 수행되고 있는 RDE 연구의 동향 및 핵심 기술에 대한 포괄적 고찰을 수행하였다.