• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.54-54
• /
• 2018

To optimize the deposition parameters of diamond films, the temperature, pressure, and distance between the filament and the susceptor need to be considered. However, it is difficult to precisely measure and predict the filament and susceptor temperature in relation to the applied power in the hot filament chemical vapor deposition (HFCVD) system. In this study the temperature distribution inside the system was numerically calculated for the applied powers of 12, 14, 16 and 18 kW. The applied power needed to achieve the appropriate temperature at a constant pressure and other conditions was deduced, and applied to actual experimental depositions. The numerical simulation was conducted using the commercial computational fluent dynamics software, ANSYS-FLUENT. To account for radiative heat-transfer in the HFCVD reactor, the discrete ordinate (DO) model was used. The temperatures of the filament surface and the susceptor at different power levels were predicted to be 2512 ~ 2802 K, and 1076 ~ 1198 K, respectively. Based on the numerical calculations, experiments were performed. The simulated temperatures for the filament surface were in good agreement with experimental temperatures measured using a 2-color pyrometer. The results showed that the highest deposition rate and the lowest deposition of non-diamond was obtained at a power of 16 kW.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권8호
• /
• pp.1078-1087
• /
• 2018

Objective: The genetic diversity of the Landrace population, a representative maternal pig breed in Korea, is important for genetic improvement. Previously, the effective population size (Ne) has been used to infer the genetic diversity of a population of interest. In this study, we aimed to use single nucleotide polymorphism (SNP) data to characterize linkage disequilibrium (LD) and the Ne of the Korean Landrace population. Methods: We genotyped 1,128 Landrace individuals from three representative Korean major grand-grand-parent (GGP) farms using the Illumina PorcineSNP60 version2 BeadChip, which covers >61,565 SNPs located across all autosomes and mitochondrial and sex chromosomes. We estimated the expected LD and current Ne, as well as ancestral Ne. Results: In the Korean Landrace population, the mean LD ($r^2$) of 3.698 million SNP pairs was $0.135{\pm}0.204$. The mean $r^2$ decreased slowly with as the distance between SNPs increased, and remained constant beyond 3 Mb. According to the $r^2$ calculations, 8,085 of 3.698 million SNP pairs were in complete LD. The current Ne (${\pm}$standard deviation) of the Korean Landrace population is approximately 92.27 [79.46; 105.07] individuals. The ancestral Ne exhibited a slow and steady decline from 186.61 to 92.27 over the past 100 generations. Additionally, we observed more a rapid Ne decrease from the past 20 to 10 generations ago, compared with other intervals. Conclusion: We have presented an overview of LD and the current and ancestral Ne values in the Korean Landrace population. The mean LD and current Ne for the Korean Landrace population confirm the genetic diversity and reflect the history of this pig population in Korea.

• 한국환경농학회지
• /
• 제26권3호
• /
• pp.204-209
• /
• 2007

Agricultural area in the vicinity of the ${\triangle}{\triangle}$ smelting factory in Kyeongbuk province, the third largest zinc smelting factory in the world, was contaminated by high concentration of heavy metals. However, the heavy metals source was not yet directly traced and thus, resulted to a conflict between the factory and residents within its vicinity. In order to determine the level of heavy metal contamination in the arable lands located at the north eastern part of the factory, soils were sampled systematically. To find out the major reason for the occurrence of this problem, waters and aerosols were sampled with constant intervals to the upward and downward direction from the factory and were analyzed to find out the heavy metal concentrations. Cadmium (Cd) and zinc (Zn) of the heavy metals were highly accumulated more than the Korean warning criteria (Cd 1.5, Zn 300 mg $kg^{-1}$) with mean values 1.7 and 407 mg $kg^{-1}$, respectively, at the surface soils (0-20 cm), and heavy metal concentration significantly decreased with increasing soil depth In addition, the concentration of both metals slightly decreased with increasing distance from the factory to the surface soils. Cadmium and Zn were detected in the upward stream water with low concentration and concentrations increased significantly in the downstream after passing across the factory. Aerosol samples also showed traces of Cd and Zn which could be attributed to the contamination of the water system and the surface soils. Conclusively, Cd and Zn emitted from the ${\triangle}{\triangle}$ smelting factory moved with the aerosol in the atmosphere and thus, contaminated the agricultural areas and the water system within it vicinity.

• 한국자기학회지
• /
• 제17권1호
• /
• pp.26-29
• /
• 2007

비 평형 시료제조법으로 잘 알려진 기계적 합금법을 이용하여 Fe(Fe-Cr, Fe-Mn, Fe-Cu, Fe-Zn)계 분말을 제조하였다. 일정한 당량비를 갖는 Fe와 전이금속원소 M(Cr, Mn, Cu, Zn)분말을 Ar 분위기에서 볼밀을 사용하여 수주에 걸친 기계적 합금을 시행하였다. 분쇄시간에 대한 Fe계 분말들의 결정 구조적 및 초미세 자기적 특성 변화를 X선 회절기와 $M\"{o}ssbauer$ 분광계를 이용하여 관찰하였다. X-선 회절실험 결과 밀링시간의 진행에 따라 합금이 발생되고 격자 상수값은 전이금속원자 M의 Fe원자 치환에 따라 증가하였다. Fe원자 주위의 국소적 원자분포의 영향을 조사하기 위한 $M\"{o}ssbauer$ 분광실험에서 밀링시간의 경과와 더불어 강자성 상에 대한 공명 흡수선들의 평균선폭은 증가되었고 상자성 상 역시 관측 되었다. 치환에 의한 Fe 원자간 거리증가는 초미세 자기장값은 분산된 값을 가져왔으며, quadrupole shift와 isomer shift의 결과는 M 치환으로 Fe의 결정구조와 국부적 전하분포의 변화가 크게 일어나지 않음을 보여준다.

• 한국철도학회논문집
• /
• 제13권3호
• /
• pp.304-308
• /
• 2010

본 연구에서는 웨이브렛 변환을 이용하여 궤도틀림을 식별하는 방법을 제시하였다. 궤도틀림과 대차 가속도응답신호에 의한 등가 웨이브렛 SISO 전달함수를 정의하였다. 현장에 적용되는 검측차의 25cm단위 궤도검측 기준에 맞추어 궤도틀림과 대차가속도 응답신호를 조정하였다. 웨이브렛 변환을 적용하기 전 입력데이터는 웨이브렛 변환 정의 조건에 맞추어 범위를 재조정한 회귀신호이다. 또한, 웨이브렛 역전 달 함수를 정의하여, 궤도틀림을 역 추정하였다. 추정된 궤도틀림과 실제의 궤도틀림의 비교를 위해 상관도와 FRF를 비교 분석하였다. 예측된 값과 기준 값 과의 잔 차의 분산비로 정의되는 틀림지수를 사용하여 궤도틀림의 이상을 분석하였으며, 개발될 알고리즘을 검증하기 위하여 시뮬레이션 연구를 수행하였다.

• 폴리머
• /
• 제30권6호
• /
• pp.492-497
• /
• 2006

에폭시/몬모릴로나이트(MMT) master batch의 혼합온도를 달리하여 복합재료를 제조하였으며, MMT의 박리에 의한 복합재료의 유전특성을 비교하였다. MMT 함량이 낮은 복합재료에서 MMT의 박리가 지배적으로 발생하였으며, 고함량의 MMT 복합재료에서는 master batch 제조온도가 증가할수록 MMT의 층간거리가 증가하였다. 박리가 지배적인 저함량의 MMT 복합재료에서는 적절한 후경화 조건에 의해 유리전이온도가 증가되는 것을 알 수 있었다. MMT의 박리가 효과적으로 발생한 복합재료에서는 에폭시 분자구조의 배향분극이 억제됨으로써 유전율과 유전손실이 감소하였으며, 에폭시/MMT master batch의 혼합온도 및 시간, 그리고 복합재료의 후경화 조건에 따라서 복합재료의 유전특성을 향상시킬 수 있었다.

• 한국응용곤충학회지
• /
• 제41권1호
• /
• pp.21-25
• /
• 2002

아메리카잎굴파리 외부기생봉인 Hemiptarsenus zilahisebessi의 수명은 20, 25, 3$0^{\circ}C$에서 각각 23.0일, 16.9일과 12.7일 이었으며 특히, $25^{\circ}C$와 3$0^{\circ}C$에서는 교미후 바로 산란이 이루어졌다. 암컷의 산란수와 일평균산란수는 20, 25, 3$0^{\circ}C$에서 각각 82.3개/3.6개, 90.3개/6.0개, 95.5개/7.8개로 온도가 높아질수록 많아지는 경향이었다. H. zilahisebessi이 내적자연증가율과 순증식율은 20, 25, 3$0^{\circ}C$에서 각각 0.1160/31.0, 0.1852/40.2. 0.2659/40.8이었다. 암컷은 주로 3령유충에 산란하였으며 기주령기에 따른 성비는 1령에서 0.1, 3령에서 0.42로 기주유충이 클수록 암컷의 많아졌다.

• 산업경영시스템학회지
• /
• 제43권3호
• /
• pp.53-60
• /
• 2020

Evaluating the operational efficiency of electric vehicle charging stations (EVCSs) is important to understand charging network evolution and the charging behavior of electric vehicle users. However, aggregation of efficiency performance metrics poses a significant challenge to practitioners and researchers. In general, the operational efficiency of EVCSs can be measured as a complicated function of various factors with multiple criteria. Such a complex aspect of managing EVCSs becomes one of the challenging issues to measure their operational efficiency. Considering the difficulty in the efficiency measurement, this paper suggests a way to measure the operational efficiency of EVCSs based on data envelopment analysis (DEA). The DEA model is formulated as constant returns of output-oriented model with five types of inputs, four of them are the numbers of floating population and nearby charging stations, distance of nearby charging stations and traffic volume as desirable inputs and the other is the traffic speed in congestion as undesirable one. Meanwhile, the output is given by the charging frequency of EVCSs in a day. Using real-world data obtained from reliable sources, we suggest operational efficiencies of EVCSs in Seoul and discuss implications on the development of electric vehicle charging network. The result of efficiency measurement shows that most of EVCSs in Seoul are inefficient, while some districts (Nowon-gu, Dongdaemun-gu, Dongjak-gu, Songpa-gu, Guro-gu) have relatively more efficient EVCSs than the others.

• 한국축산식품학회지
• /
• 제18권2호
• /
• pp.164-175
• /
• 1998

The objective of this study was to investigate the effects of freezing rate on ice crystal size and freeze-drying rate. Our experiments were carried out with self-manufactured freeze-dryer. Gelatin gels (2% w / w, 80$\times$20mm) were frozen unidirectionally (Neumann's model) from the bottom at -45, -30, -20, and -15$^{\circ}C$ and followed with freeze-drying. Under the upper conditions we measured freezing rate and the change of temperature and pressure during freeze drying. Freeze-dried gelatins were cut horizontally into 5 mm thickness from the bottom and measured their pore sizes. Also freeze-drying rate(primary drying) is estimated by measuring the temperature of sample and pressure of vacuum chamber. During freeze-drying, profiles of pressure and temperature were shown constant tendency regardless of freezing temperature and we could expect the end-point of freeze drying by considering pressure and temperature together. In temperature profiles, the point which temperature increased significantly was observed during freeze-drying. There is no relationship between freeze temperature and drying rate of primary drying in our model system. As freezing temperature increased, ice crystal size(X*) which correspond to 63.2% of cumulative frequency was increased and at the same freezing temperature ice crystal size(X*) was decreased with distance from the bottom of the sample. Freezing conditions have a strong influence on the quality of the final freeze-dried products in freeze-drying system.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.327-341
• /
• 2017

Openings in slabs are usually required for many different applications such as aeriation ducts and air conditioning. Opening in concrete slabs due to cutouts significantly decrease the member stiffness. There are different techniques to strengthen slabs with opening cutouts. This study presents experimental and numerical investigations on the use of Carbon Fiber Reinforced Polymers (CFRP) as strengthening material to strengthen and restore the load carrying capacity of R.C. slabs after having cutout in the hogging moment region. The experimental program consisted of testing five (oneway spanning R.C. flat slabs) with overhang. All slabs were prismatic, rectangular in cross-section and nominally 2000 mm long, 1000 mm width, and 100 mm thickness with a clear span (distance between supports) of 1200 mm and the overhang length is 700 mm. All slabs were loaded up to 30 kN (45% of ultimate load for reference slab, before yielding of the longitudinal reinforcement), then the load was kept constant during cutting concrete and steel bars (producing cut out). After that operation, slabs were loaded till failure. An analytical study using finite element analysis (FEA) is performed using the commercial software ANSYS. The FEA has been validated and calibrated using the experimental results. The FE model was found to be in a good agreement with the experimental results. The investigated key parameters were slab aspect ratio for the opening ratios of [1:1, 2:1], CFRP layers and the laminates widths, positions for cutouts and the CFRP configurations around cutouts.