• 한국지반공학회지:지반
• /
• 제11권3호
• /
• pp.55-68
• /
• 1995

본 연구는 수직구의 바닥굴착을 위한 바닥발파시 삼승근환산식과 자승근환산식의 발파진동상수 및 감쇠지수와 암질지수(RQD)와의 관계를 시험발파계측을 통하여 정리분석한 것이다. 각종 발파시 발파진동의 크기는 장약량, 발파원과 발파진동 측정지점과의 거리, 지반의 특성에 따라 크게 좌우되며 본 논문에서는 지반의 특성이 발파진동에 미치는 영향을 규명하기 위하여 암반의 절리특성을 대표하는 RQD와 발파진동 크기와의 관계를 연구한 것이다. 시험결과 RQD의 증가에 따라 발파진동상수 K와 감치지수 n의 절대치는 상대적으로 증가하는 것으로 나타났으며 본 연구결과에 의하여 향후 암질지수에 따른 바닥발파의 발파진동속도를 예측할 수 있다.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.105-111
• /
• 2001

The creep crack growth properties in 3.3NiCrMoV steel were investigated at 55$0^{\circ}C$ by using CT specimen under constant load and constant Ct condition that was held during crack growth of Imm distance. Ct lelied on load line displacement rate, C＊usually increased with crack length though load is reduced in order to maintain constant Ct value as crack growth and appeared scatter band. At constant load and Ct region, crack growth slope was 0.900 and 0.844 each, on the other hand C＊ slope was 0.480. Fully coalesced area(FCA) ahead of crack tip increased as Ct increase to the critical value, and after that value FCA decreased. For the tertiary creep stage of crack growth test, the most of displacement was due to the steady state creep, except only small part due to the primary creep and other effects. Therefore, tests were mainly interrupted in the tertiary stage to obtain high value of Ct.

• KDI Journal of Economic Policy
• /
• 제40권1호
• /
• pp.67-83
• /
• 2018

We have hypothesized that nuclear risk is significantly inversely related to the distance from residences to nuclear power plants and that the level of life satisfaction of residents therefore increases with the distance. We empirically explore the relationship between Ulsan citizens' life satisfaction levels and the distance between their residences and the Kori and Wolsong nuclear power plants (NPP) based on the life satisfaction approach (LSA). The dataset we used covers only Ulsan citizens from the biennial Ulsan Statistics on Citizen's Living Condition and Consciousness of 2014 and 2016. Controlling for micro-variables such as education, work satisfaction, gender, marital status, and expenditures, we found a statistically significant relationship between life satisfaction and the distance between the residences and the nuclear power plants. Nuclear negative externalities including (i) health and environmental impact, (ii) radioactive waste disposal, and (iii) the effect of severe accidents can be quantified in terms of LS units and monetary units. We were able to calculate the monetary value of NPP externalities at $277 per kilometer of distance for Kori and $280 per kilometer of distance for Wolsong at constant 2015 prices. These estimates are quite different from the traditional estimates made with the contingent valuation method, whereas they are similar to the findings of LSA studies abroad. Hence, the need to adopt the LSA in South Korea and policy implications are demonstrated.

• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.37-43
• /
• 2012

본 논문은 광대역 센싱을 수행하기 위한 방법으로 다중 협대역을 사용하여 한번에 센싱하는 방법을 제안한다. 센싱의 신뢰성을 높이기 위한 방안으로써 면허사용자와 CR사용자의 거리에 따른 가중치가 적용된 결합방식인(DWC : Distance based weight combining) 기법을 사용한 에너지 검출 기반 협력 스펙트럼 센싱을 제안하고 이에 따른 시스템 모델의 모의 실험 결과를 분석한다. 면허 사용자와 CR사용자 사이의 무선 채널은 가우시안 채널로 모델링하였다. 에너지 검출법을 위한 임계값은 각 채널의 SNR(Signal to Noise Ratio)에 따라 다르게 적용 되고, 각 채널의 잡음 신호의 평균값으로 가정한다.

• 한국정보통신학회논문지
• /
• 제26권1호
• /
• pp.104-113
• /
• 2022

본 논문에서는 OFDM 레이다를 위한 딥러닝 기반 표적의 거리 및 속도 추정 기법을 제안한다. 제안하는 기법은 표적으로부터 반사된 수신 신호를 받아 변조신호 제거 후 2차원 FFT를 통해 2차원 주기도를 얻는다. 주기도는 기존 및 제안 방법에서 표적의 거리 및 속도를 추정하는 입력신호이다. 주기도에서 정점은 표적의 위치를 나타내는데 표적의 거리 및 속도 추정을 위해 널리 사용되는 기존 기법은 CFAR (Constant False Alarm Rate) 알고리즘이다. 반면 제안하는 기법은 다중 출력 CNN (Convolutional Neural Network)을 이용하여 거리 및 속도를 추정한다. 기존 기법과 달리 제안 기법은 주기도 이외에 잡음 전력과 같이 추가적인 정보가 필요하지 않아 사용하기 편리하다. 컴퓨터 시뮬레이션 결과에 따르면 제안 추정 기법은 기존 기법보다 거리 및 속도 추정 MSE (Mean Square Error)오차 성능을 5배 이상 개선하며 송신 OFDM 심볼 개수가 증가할수록 정확도가 향상되는 특성을 보인다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.95-101
• /
• 2002

The propagation rate(da/dt) prediction parameter and the microstructure properties of creep crack in domestic 3.3NiCrMov steel were investigated at 550$\^{C}$ by using 0.5" CT specimen under constant load(4090N) and constant Ct(300∼4000N/mhr) condition that was maintained during crack growth of 1mm distance. C＊ usually increased with crack length though load was reduced in order to maintain constant Ct value as crack growth and considerably showed the scatter band, but Ct depended on load line displacement rate and represented a good relation with da/dt. At constant toad and Ct region, crack growth slope was 0.900 and 0.844 each, in the other hand C＊ slope was 0.480. Fully coalesced area(FCA) ahead of crack tip was increased as Ct value increase to the critical value, and after that value FCA decreased. The average diameter ditribution of cavity in FCA showed the greatest value about 1.5 ㎛ when Ct=2000N/mhr. The increasing of Ct in FCA view point enlarged the size of damage area and the size reached to maximum 800 ㎛ when Ct=2000N/mhr.

• 대한소아치과학회지
• /
• 제7권1호
• /
• pp.33-40
• /
• 1980

The author observed the eruption pattern of the mandibular premolars. For this study the author took 406 cases of oblique cephalographs of 6 to 12 year old children. The measurement were with regard to the vertical and horizontal dimensional changes and tooth axis changes to the occlusal plane. The following results were obtained. 1. At stage V the tooth axis of 1st premolar inclined mesially to the occlusal plane, as the tooth erupt toward vertically the angulation changed that at stage X the tooth axis almost right angle to the occlusal plane. 2. The distance from the root apex of premolars to the lower border of mandible were slightly increased to the stage VII, while after stage VII rapid increasing appeared. At stage X the distance of 1st premolar was more longer than 2nd premolar. 3. The distance from the mesial surface of 1st molar to the mesial surface of premolars were decreased slightly to the stage VII, but this distances were decreased rapidly after stage VII. 4. The distance between distal surface of 1st premolar and mesial surface of 2nd premolar was almost constant before stage VIII, at stage IX this distance was little presented because the premolars were contacted.

• Tribology and Lubricants
• /
• 제18권1호
• /
• pp.16-23
• /
• 2002

For increasing the yield stress of ER fluids, the compressing ER electrode was developed and the compressing electrorheological (ER) behavior of anhydrous ER fluids in silicone oil of phosphorous ester cellulose powder was investigated. Under constant electric field, not only the current density but also the yield stress of anhydrous ER fluids were studied as varying the compressing length of ER electrode distance. From the experimental results the compressing of ER electrode had a large influence to the ER properties of anhydrous ER fluids. The current density was proportional to the compressing length of ER electrode under constant electric field and volume fraction also tile compressing yield stress was proportional to the volume fraction of dispersed particles under constant electric field and compressing length. When the ER electrode was compressed with 150mm after charging the electric field, 4 kV, tile yield stress of phosphoric ester cellulose ER fluids increased to thirteen times comparing with the yield stress measured at normal electrode.

• Bulletin of the Korean Chemical Society
• /
• 제22권7호
• /
• pp.732-738
• /
• 2001

The cross second-derivative of the activation energy,${\theta}$G${\neq}$ , with respect to the two component thermodynamic barriers, ${\theta}$G˚X and ${\theta}$G$^{\circ}C$Y, can be given in terms of a cross-interaction constant (CIC), $\betaXY(\rhoXY)$, and also in terms of the intrinsic barrier,${\theta}$G${\neq}$ , with a simple relationship between the two: $\betaXY$ = $-1}(6${\theta}$G${\neq}$).$ This equation shows that the distance between the two reactants in the adduct (TS, intermediate, or product) is inversely related to the intrinsic barrier. An important corollary is that the Ritchie N+ equation holds (for which $\betaXY$ = 0) for the reactions with high intrinsic barrier. Various experimental and theoretical examples are presented to show the validity of the relationship, and the mechanistic implications are discussed.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.59-61
• /
• 2017

This research was analyzed thermal characteristics that was appointed disadvantage when smart LED driver ICs was packaged and we applied extracted thermal characteristics for optimal layout design. We confirmed reliability of smart LED driver ICs package without additional heat sink. If the package is not heat sink, we are possible to minimize package. For extracting thermal loss due to overshoot current, we increased driver current by two and three times. As a result of experiment, we obtained 22 mW and 49.5 mW thermal loss. And we obtained optimal data of 350 mA driver current. It is important to distance between power MOSFET and driver ICs. If the distance was increased, the temperature of package was decreased. And so we obtained optimal data of 3.7 mm distance between power MOSFET and driver ICs. Finally, we fabricated real package and we analyzed the electrical characteristics. We obtained constant 35 V output voltage and 80% efficiency.