DOI QR코드

DOI QR Code

Study on Thermal Analysis for Optimization LED Driver ICs

  • Chung, Hun-Suk (Department of Photovoltaic Engineering, Far East University)
  • Received : 2017.01.10
  • Accepted : 2017.02.18
  • Published : 2017.04.25

Abstract

This research was analyzed thermal characteristics that was appointed disadvantage when smart LED driver ICs was packaged and we applied extracted thermal characteristics for optimal layout design. We confirmed reliability of smart LED driver ICs package without additional heat sink. If the package is not heat sink, we are possible to minimize package. For extracting thermal loss due to overshoot current, we increased driver current by two and three times. As a result of experiment, we obtained 22 mW and 49.5 mW thermal loss. And we obtained optimal data of 350 mA driver current. It is important to distance between power MOSFET and driver ICs. If the distance was increased, the temperature of package was decreased. And so we obtained optimal data of 3.7 mm distance between power MOSFET and driver ICs. Finally, we fabricated real package and we analyzed the electrical characteristics. We obtained constant 35 V output voltage and 80% efficiency.

Keywords

References

  1. MOSFET Basics - Fairchild Semiconductor (Literature Distribution Center for On Semiconductor, USA, 2000).
  2. G. P. Sim, B. S. Ann, Y. H. Kang, Y. S. Hong, and E. G. Kang, J. Korean Inst. Electr. Electron. Mater. Eng., 26, 190 (2013). [DOI: https://doi.org/10.4313/JKEM.2013.26.3.190]
  3. H. S. Lee, E. G. Kang, A. Shin, H. H. Shin, and M. Y. Sung, Trans. KIEE., 7 (2006).
  4. Y. S. Hang, E. S. Jung, and E. Y. Kang, J. Korean Inst. Electr. Electron. Mater. Eng., 25, 276 (2012). [DOI: https://doi.org/10.4313/JKEM.2012.25.4.276]
  5. J. H. Lee, E. S. Jung, and E. Y. Kang, J. Korean Inst. Electr. Electron. Mater. Eng., 25, 270 (2012). [DOI: https://doi.org/10.4313/JKEM.2012.25.4.270]