• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.575-582
• /
• 2000

The flat Dilatometer test(flat DMT) has been known as an in-situ testing method which is simple and robust to use, and reliable for site stratification and evaluation of soil properties. It was designed and proposed by Marchetti in 1975 to characterize the properties of soils. There are many researches that have been done to evaluate the horizontal coefficient of consolidation from the dissipation test results of flat DMT on normally consolidated and slightly overconsolidated clays. The representative estimation methods of estimating the horizontal consolidation coefficient are DMT-C method which uses a C-reading dissipation curve and DMT-A method which uses a A-reading dissipation curve. This paper represents a comparison analysis of those two methods in obtaining the horizontal coefficients of consolidation. The reference values are also obtained by CPTU and other laboratory tests. The applicability of using flat DMT to characterize the consolidation behavior is also reviewed for two sites. According to the results, DMT-A method is not suitable for silty clays possibly because of the compressibility characteristics. As for the normally consolidated and slightly overconsolidated clays, the results obtained from the two methods are comparable with each other as well as with the laboratory test results.

• 한국농공학회지
• /
• 제42권4호
• /
• pp.115-123
• /
• 2000

This study compared the degree of consolidation by hyperbolic, curve fitting , Asaoka's and methods using values measured with a theoretical curve in consideration of smear effect and well resistance. The degree of consolidation by the Hyperboilc method was underestimated than the degree of consolidation by Curve fitting. Asaoka's , and Monden's methods. The typical range of the coefficient of horizontal consolidation was Ch=(2-3)Cv in the case considering smear effect and well resistance, and Ch =(0.5-2.1) Cv in the case disregarding smear effect and well resistance. The degree of consolidation obtained by ground settlement monitoring was nearly the same value when the coefficient of smear zone permeability by back analysis was shown to be half that of in-situ and the diameter of the smear zone was shown to be double that of mandrel. By increasing the diameter reduction ratio of the drain, the time of consolidation was delayed. The effect of well resistance showed that the case of a small coefficient of permeability was much more than in the case of a large coefficient of permeability . It was recommended that when designing diameter reduction of a drain, well resistance should be considered.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1328-1339
• /
• 2008

For a commonly used piezocone with a shoulder filter element, dilatory dissipation behavior, which shows an initial temporary increase in pore pressure, has been observed in overconsolidated cohesive soils. However, there is no appropriate way to estimate a consolidation parameter from a dilatory dissipation curve because currently available interpretation methods were developed based on the monotonic decrease of the excess pore pressure. In this study, the interpretation method for evaluation of coefficient of consolidation from a dilatory dissipation result of piezocone test was developed by performing the finite difference analysis on the dissipation after cone penetration. The distribution of the initial excess pore pressure induced by cone penetration, which is the core of the analysis, was estimated from the empirical modification of a solution proposed by cavity expansion theory and critical state concept. And the proposed interpretation method was applied to the field piezocone data and the results were compared to those obtained from laboratory tests. Its reliability was confirmed by the insignificant difference between the values of coefficient of consolidation from piezocone tests and laboratory consolidation tests.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.681-688
• /
• 2000

This study presented the new method for evaluating the coefficient of consolidation by using inflection point method which was based on the fact that time factor, T corresponding to the inflection point of a semilogarithmic plot of a time curve is fixed and equals to T ＝ 0.405 at 70% consolidation. In the proposed method, the next load increment is applied as soon as the necessary time required to identify the inflection point. Thus, the coefficient of consolidation may be easily evaluated. The time required to complete the testing using this rapid consolidation method could be as low as 1.5-3 hours compared with 1 or 2 weeks in the case of the conventional consolidation test.

• 한국지반공학회논문집
• /
• 제15권1호
• /
• pp.141-149
• /
• 1999

점토지반의 압밀계수에 대한 이방성을 연구하기 위하여 인공퇴적점토시료로서 Rowe형 압밀시험기와 재래식 일반 압밀시험기를 이용하여 일련의 압밀시험을 수행하였다. 시험결과 Rowe형 압밀시험기에 의해서 구한 내향수평압밀계수는 일반 압밀시험기에 의한 연직 압밀계수의 약 2배이었다. 또한, 연직모래배수재의 설치로 인한 스미어 영향은 과압밀응력범위에서 특히 크며 압밀응력이 증가할수록 감소하였다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.542-545
• /
• 2007

The vertical drain method generate the disturbed zone, because the drainage should be penetrated into the in-situ ground. The characteristics of the smear zone generated cause the problems that the coefficient of permeability decreases and the consolidation time anticipated in the design is not properly shortened. In this study, in order to understand such influence, the laboratory test were carried out so as to reasonably determine the coefficient of consolidation in silt. For that procedure, mandrel of a diversity were penetrated into the soil tube with silt, and then the variation of pore water pressure was measured with the pore pressure meter, Then, the range of smear effect on silt was estimated with monitoring data through the laboratory test, and also analyzed with inputting the coefficient of consolidation into the theoretical equation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.463-468
• /
• 2002

Based on the results obtain from the investigation of Nak-Dong River District, it was classified as very thick, soft soil deposit. Furthermore, during the construction of structures large settlements are expected. Since large settlement affects the structures life, it is very important to accurately determine the consolidation of soil based on the obtained results. In this study piezocone test and laboratory test were performed to determine the consoildtion properties of Nak-Dong River District Pusan, Gyeong-Nam province. Degree of consoildation and the coefficient of consoildation obtained from the data of piezocone test and the results of the Oedometer test were compared and analyzed. Using the results the porewater pressure coefficient($B_q$) was obtained and the relationship with the Plasticity Index was also determined. From the results of this study the effects of the degree of consolidation and consolidation coefficient, and the porewater pressure coefficient and the Plasticity Index was determined.

• Geomechanics and Engineering
• /
• 제6권6호
• /
• pp.577-592
• /
• 2014

The methods for estimating in-situ hydraulic conductivity ($k_{hp}$) and coefficient of consolidation ($c_{hp}$) in the horizontal direction from piezocone penetration and dissipation test results have been investigated using test results at two sites in Saga, Japan. At the two sites the laboratory values of hydraulic conductivity ($k_v$) and coefficient of consolidation ($c_v$) in the vertical direction are also available. Comparing $k_{hp}$ with $k_v$ and $c_{hp}$ with $k_v$ values, suitable methods for estimating $k_{hp}$ and $c_{hp}$ values are recommended. For the two sites, where $k_{hp}{\approx}k_v$ and $c_{hp}{\approx}2c_v$. It is suggested that the estimated values of $k_{hp}$ and $c_{hp}$ can be used in engineering design.

• 한국농공학회지
• /
• 제20권3호
• /
• pp.4750-4770
• /
• 1978

Under the various variations of the sample thickness, the load increment ratio and the load increment duration, this consolidation test of the clay in the Asan Bay was tried for the comparison with the standard consolidation test. The results gained are as follows; 1. The void ratio variations of the leached-clay samples were increasingly high, according as the sample thickness thinned and the load increment duration and the laod increment ratio increased. 2. The coefficient of consolidation were increased with the increment of the sample thickness, of the load increment ratio and of the load increment duration. Near the pre-consolidation load, the coefficient of secondary consolidation had the maximum value and lessened with the increment of the sample thicknss, and of the load increment duration 3. The value of the pre-consolidation load increased in proportion to the increment of the sample thickness and the decrease of the load increment ratio and the load increment duration. 4. The compression indices increased as the increment of load increased and decreased as the sample thickness increased. 5. The initial compression ratio increased as the sample thickness, the load increment ratio and the load increment duration decreased. The ratio of primary compression to the secondary decreased with the increment of the sample thickness and of the load increment ratio. 6. The time at the completion of psimary consolidation increased with the increment of the sample thickness and of the consolidation load, and with the decrease of the load increment ratio. 7. The compression indicses increaed as the sample thickness lessened and decreased as the load increment ratio increased. The coefficient of consolidation increased according as the sample thickness, the load increment ratio and the load increment duration went up. The settlement at the construction site should be calculated highly in proportion as the sample thickness lessened and the load increment ratio increased. The consolidation ratio is thought to be accelerated if the sample thickness and the load increment ratio becomes higher and the load increment duration longer.

• 한국지반공학회논문집
• /
• 제20권3호
• /
• pp.151-159
• /
• 2004

본 논문에서는 자가굴착식 프레셔메터 시험의 변형을 유지시험(strain holding test)에서 관측된 소산시험 결과의 초기 소산경향으로부터 점성토 지반의 수평압밀계수를 추정하기 위한 최적화기법의 적용에 대하여 기술하였다. 프레셔메터의 확장으로 인한 초기 과잉간극수압의 분포는 Randolph. ＆ Wroth(1979)의 해석적 해(analytical solution)를 이용하여 지반의 강성지수의 함수로 모사되었으며 연속된 간극수압 소산과정까지 전과정이 모사되었다. 제안된 기법에서는 이를 소산곡선과 정규화 된 관측 소산곡선이 초기 50% 범위에서 소산경향이 가장 일치하도록 하는 수평압밀계수를 최적화기법을 이용하여 결정하였다. 제안된 기법을 김제와 양산에서 수행된 기존의 자가굴착식 프레셔메터 연구결과의 해석에 적용하였으며 제안된 방법으로 얻어진 수평압밀계수를 기존의 연구결과, 실내 및 원위치 시험결과와 비교하였다. 연구결과 제안된 방법은 피에조콘 소산시험과 매우 일관성있게 일치하는 수평압밀계수를 제공할 뿐 아니라 부분배수가 발생하는 지점에서도 간극수압 소산경향을 반영함으로 인해 보다 적절한 수평압밀계수를 결정할 수 있음을 알았다.