1 |
Baligh, M.M. and Levadoux, J.N. (1986), "Consolidation after undrained piezocone penetration. II: interpretation", J. Geotech. Eng., ASCE, 112(7), 727-745.
DOI
ScienceOn
|
2 |
Arulrajah, A., Bo, M.W., Nikraz, H. and Balasubramaniam, A.S. (2007), "Dissipation testing of Singapore marine clay by piezocone tests", Geotech. Geol. Eng., 25(6), 647-656.
DOI
ScienceOn
|
3 |
ASCRDO (2008), Site Investigation Reports, Along the Route of the Saga Section, around Ariake Sea Highway, Saga Japan, Ariake Sea Coastal road Development Office. [In Japanese]
|
4 |
Baligh, M.M. and Levadoux, J.N. (1980), "Pore pressure dissipation after cone penetration", Research Report R80-11, Order No. 662, Department of Civil Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA, April, pp. 367.
|
5 |
Burns, S.E. and Mayne, P.W. (1998), "Monotonic and dilatory pore pressure decay during piezocone tests in clay", Can. Geotech. J., 35(6), 1063-1073.
DOI
|
6 |
Campanella, R.G. and Robertson, P.K. (1988), "Current status of the piezocone test", (Ruiter J. Editor), Penetration Testing, Balkema, Rotterdam, Netherlands, 93-116.
|
7 |
Chai, J.-C. and Miura, N. (1999), "Investigation on some factors affecting vertical drain behavior", J. Geotech. Geoenviron. Eng., 125(3), 216-226.
DOI
ScienceOn
|
8 |
Chai, J.-C., Carter, J.P., Miura, N. and Hino, T. (2004), "Coefficient of consolidation from piezocone dissipation test", Proceedings of International Symposium on Lowland Technology, ISLT 2004, Bangkok, Thailand, pp. 1-6.
|
9 |
Chai, J.-C., Miura, N. and Koga, H. (2005), "Lateral displacement of ground caused by soil-cement column installation", J. Geotech. Geoenviron. Eng., ASCE, 131(5), 623-632.
DOI
ScienceOn
|
10 |
Chai, J.-C, Agung, P.M.A., Hino, T., Igaya, Y. and Carter, J.P. (2011), "Estimating hydraulic conductivity from piezocone soundings", Geotechnique, 61(8), 699-708. DOI: 10,1680/geot.10.P.009
DOI
|
11 |
Chai, J.-C., Jia, R. and Hino, T. (2012b), "Anisotropic consolidation behavior of Ariake clay from three different CRS tests", Geotech. Test. J., ASTM, 35(6), 1-9. DOI: 10.1520/GTJ103848
DOI
ScienceOn
|
12 |
Chandler, R.J., Leroueil, S. and Trenter, N.A. (1990), "Measurements of the permeability of London clay using a self boring permeameter", Geotechnique, 40(1), 113-124.
DOI
|
13 |
Arulrajah, A., Nikraz, H. and Bo, M.W. (2005), "In-situ testing of Singapore marine clay at Changi", J. Geotech. Geol. Eng., 23(2), 111-130.
DOI
|
14 |
Teh, C.I. and Houlsby, G.T. (1991), "An analytical study of the cone penetration test in clay", Geotechnique, 41(1), 17-34.
DOI
|
15 |
Wang, J.-P., Xu, Y.-S., Ma, L. and Shen, S.-L. (2013), "An approach to evaluate hydraulic conductivity of soil based on CPTU test", Marine Georesour. Geotech., 31(3), 242-253.
DOI
|
16 |
Liu, S.Y., Cai, G.J., Tong, L.Y. and Du, G.Y. (2008), "Approach on the engineering properties of lianyungang marine clay from piezocone penetration tests", Marine Georesour. Geotech., 26(3), 189-221.
DOI
|
17 |
Elsworth, D. and Lee, D.S. (2007), "Limits in determining permeability from on-the-fly uCPT Sounding", Geotechnique, 57(8), 769-685. DOI: 10.1680/geot.2007.57.8.769
|
18 |
Levadoux, J.N. and Baligh, M.M. (1986), "Consolidation after undrained piezocone penetration. I: prediction", J. Geotech Eng, 112(7), 707-726.
DOI
ScienceOn
|
19 |
Lunne, T., Robertson, P.K. and Powell, J.J.M. (1997), Cone Penetration Testing in Geotechnical Practice, London, UK, E & FN Spon.
|
20 |
Miura, N., Chai, J.-C., Hino, T. and Shimoyama, S. (1998), "Depositional environment and geotechnical properties of soft deposit in Saga plain", Indian Geotech. J., 28(2), 121-146.
|
21 |
Park, Y.M. (1994), "A research on the mechanical properties of lowland marine clay and vertical drain improvement method", Ph.D. Dissertation, University of Saga, Japan.
|
22 |
Robertson, P.K. (2010), "Estimating in-situ soil permeability from CPT and CPTu", 2nd International Symphosium on Cone Penetration Testing, Huntington Beach, CA, USA, pp. 2-43.
|
23 |
Robertson, P.K., Sully, J.P., Woeller, D.J., Lunne, T., Powell, J.J.M. and Gillespie, D.G. (1992), "Estimating coefficient of consolidation from piezocone tests", Can. Geotech. J., 29(4), 539-550.
DOI
|
24 |
Samui, P. and Sitharam, T.G. (2010), "Design of piezovibro cone and calibration chamber", Geomech. Eng., Int. J., 2(3), 177-190.
DOI
ScienceOn
|
25 |
Senneset, K. and Janbu, N. (1985), "Shear strength parameters obtained from static cone penetration tests", Strength Testing of Marine Sediments, Laboratory and In-Situ Measurements, ASTM STP 883, (R.C. Chaney and K.R. Demars, Eds.), American Society for Testing and Materials, PA, USA, pp. 41-54.
|
26 |
Song, C.R. and Pulijala, S. (2010), "Hydraulic property estimation using piezocone results", J. Geotech. Geoenviron. Eng., ASCE, 136(3), 456-463.
DOI
ScienceOn
|
27 |
Sully, J.P., Robertson, P.K., Campanella, R.G. and Woeller, D.J. (1999), "An approach to evaluation of field CPTU dissipation data in overconsolidated fine-grained soils", Can. Geotech. J., 36(2), 369-381.
DOI
|
28 |
Chai, J.-C., Sheng, D., Carter, J.P. and Zhu, H.-H. (2012a), "Coefficient of consolidation from non-standard piezocone dissipation curves", Comput. Geotech., 41, 13-22.
DOI
ScienceOn
|
29 |
Jia, R., Chai, J.-C. and Hino, T. (2013), "Interpretation of coefficient of consolidation from CRS test results", Geomech. Eng., Int. J., 5(1), 57-70.
DOI
ScienceOn
|