• Journal of the Korea Society of Computer and Information
• /
• v.28 no.11
• /
• pp.125-134
• /
• 2023

In this paper, we propose an efficient surveillance RADAR(RAdio Detection And Ranging) interface control unit(ICU) design in the naval combat system. The proposed design applied a standardized architecture for modules that can be shared in ship combat system software. An error detection function for each link was implemented to increase the recognition speed of disconnection. Messages that used to be sent periodically for human-computer interaction(HCI) are now only transmitted when there is a change in the datagram. This can reduce the processing load of the console. The proposed design supplements the radar with the waterfall scope and time-limited splash recognition in relation to the hit check and zeroing of the shot when the radar processing ability is low due to the adoption of a low-cost commercial radar in the ship. Therefore, it is easy for the operator to determine whether the shot is hit or not, the probability of wrong recognition can be reduced, and the radar's resources can be obtained more effectively.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.483-486
• /
• 2006

The fan is widely used to cool high heat flux generated as of the electronic communication device consoles. It, however, makes a lot of noises that interfere considerably with the operation environment. This study was conducted to obtain the cooling design technology of the consoles through being equipped with the Heat Pipe Heat Exchangers (HPHE) together with low revolution fans in place of existing fans for the cooling technology of the forced convection. Not only the sealed type consoles but the HPHE were also designed so as to cool effectively the heat generated from the inside of the console. The simulation was conducted by computational numerical analysis along with its experiments. The results of the numerical analysis and experiments were compared in order to improve the cooling technology of the consoles mounted with the HPHE. Consequently, instead of loud fan noise generated as of existing forced convection methods, the cooling technology of HPHE can remarkably improve many problems such as the operation environment, indoor dust, malfunction caused by pollution sources and so on.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1696-1699
• /
• 1997

The robot mainpulator for inspection of pressurizer in the nuclear power plant has been developed, which consists of four parts : 2 arms, movable gripper, base frame, contorl console. To extract the damaged electric heating rod inside pressurizer, the gripper has been developed using wire lope and self-locking mechanism. for the examination of the structural stability of the robot manipulator, stress analysis is performed by using the ANSYS code.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.1
• /
• pp.53-59
• /
• 2002

A correctly designed bridge offers improved operational safety in terms of increased vigilance, flexibility of operation, precision of control and operator＇s situational awareness. According1y to design human centered bridge, the consideration shall be given to the man-machine interface, location and interrelation of workstation, configuration of console, windows. field of vision and bridge working environment. The state-of-the-art suits for one-man operation by integration of conning information and central information presentation. Further, it is desirable to enable two man ship operation for emergency operations, training purposes and redundancy. In this point of view, this thesis would like to design a conceptual bridge.

• Journal of the Korea Furniture Society
• /
• v.27 no.1
• /
• pp.15-25
• /
• 2016

Increasing concerns of environment need to make change furniture field to more environmentally friendly approach, such as reuse of by-products from wooden products. As it is, the methods of recycling wood for industrial purposes have the advantage of productivity and adaptability. However, the industrial way is required a certain production facility of processing wooden by-products and has possible hygienic problems due to contaminated sources. Many designers have developed their own methods for reuse of wood in unique and artistic ways. Even so, because of confined sources, it could be not enough supply. Therefore, I developed the design methodology utilizing wooden by-products from S Design Company to relieve former ways' problems. The design suggestion took materials from a safe and abundant source. The wooden leftover pieces were connected together with epoxy clay, so previous process traces of furniture are remained as a decorative factor. Moreover, the synthesized material was able to be processed by ordinary woodworking facilities without additional installations. In doing so, console table focused on a commercial purpose and dining table for an artistic objective were successfully fabricated as final suggestions. In consideration of the proposal using wooden furniture leftovers, diverse recycling designs should be investigated for future reference.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.14 no.2
• /
• pp.16-23
• /
• 2018

In order to investigate the ways to enhance the seismic performance of APR1400 seismic fragile equipment by direct design changes, four equipment such as Reactor Vessel Support, Integrated Head Assembly, Remote Shutdown Console, and Pressurizer are reviewed using information of the main dimensions, seismic stress evaluation results, design FRS, etc. in this paper. In addition to the direct reinforcement of equipments, the feasibility of seismic isolation for the safety related cabinet is also investigated and the actual adaption plan of a commercial spring-damper system is briefly reviewed.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.94-100
• /
• 2008

Present chemical application method using a power sprayer has been labor intensive, costly and ineffective. Therefore, a small agricultural unmanned helicopter was suggested to replace the conventional spray system. In this study, conceptual design for developing the helicopter and a consequential prototype were reported. The overall conceptual design was initiated by deciding the type of agricultural helicopter, as the single rotor helicopter with a tail system. As the first step of the designing, an air-cooled, 2-stroke engine was selected and a prototype transmission was designed by determining the rotating speed of main rotor shaft. A 'pusher' type tail rotor system was adapted to balance the reaction torque and reduce the power use. The tail boom length was designed to avoid the rotating trajectory of the main rotor. The RF console consisted of the engine control, attitude control, and emergency control modules. Assembling the prototype concluded the mechanical development of the agricultural helicopter.

• Korean Institute of Interior Design Journal
• /
• v.18 no.5
• /
• pp.89-100
• /
• 2009

Stage lighting system is very important in theater. Because basic of performing art. Recently, The stage lighting system is very close with a performing arts. The performance arts is to have an easy communication between actors and audience. All activities related to performance art take place between the stage light and auditorium. Therefore, when constructing theater the best conditions of the stage light system should be considered for the smooth progress of play. It will be method of solution that basically facility in the performance art hall. The results of this study can be used for suggesting an operation and system improvement for stage lighting system in performance art hall. Recently, changes in the progress of plays have required the perfect stage light system. As a result, performance art hall are the most advanced stage lighting system technology of changed. The following procedures were taken for this research-the literature on the development of stage lighting system and equipment, structure, and the dimmer and computer console system has been reviewed theoretically Most of all, Cheonan City Hall Bongseo Hall and CMB EXPO art hall is important a sample of lighting system. The result of this study presents operation and system improvement stage lighting system in theater, below to operation and system improvement at stage lighting system local self-government corporation performance art hall are inconsistent stage.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1753-1758
• /
• 2005

Human Adaptive Mechatronics (HAM), which is a system concept to adapt human characteristics, has been proposed. As the HAM application, this paper addresses an information emphasis scheme to alert some hazards which are undetectable by a human operator. The emphasis scheme employs cognitive psychological approach to human discrimination characteristics because excess or deficient emphasis may disturb the operation. One of advantages of teleoperation system is able to include human valuable abilities as global environment recognition, planning, prediction and so on. To implement these abilities to mechanical system is difficult because of not enough intelligence. Proposed teleoperation system is designed to progress the human abilities, and moreover, to not disturb the abilities. In this paper, we consider that the discrimination characteristics depend on window positions on GUI display and operator's individuality. Finally, the efficiency of the alert scheme is verified by some experiments.

• Convergence Security Journal
• /
• v.8 no.1
• /
• pp.43-48
• /
• 2008

Previously, we need to log-in to the target system to check the system log. This is a problem that can not be monitored in real time. This paper designed a syslog real-time monitoring system to solve this problem. The proposed system be able to detect a problem of system in real time without log-in process and be able to solve problems immediately. The proposed syslog real-time monitoring system in this paper is based on Windows OS.