When precast concrete infill panels are connected to steel frames at discrete locations, interaction at the structural interface is neither complete nor absent. The contribution of precast concrete infill panels to the lateral stiffness and strength of steel frames can be significant depending on the quality, quantity and location of the discrete interface connections. This paper presents preliminary experimental and finite element results of an investigation into the composite behaviour of a square steel frame with a precast concrete infill panel subject to lateral loading. The panel is connected at the corners to the ends of the top and bottom beams. The Frame-to-Panel-Connection, FPC4 between steel beam and concrete panel consists of two parts. A T-section with five achor bars welded to the top of the flange is cast in at the panel corner at a forty five degree angle. The triangularly shaped web of the T-section is reinforced against local buckling with a stiffener plate. The second part consists of a triangular gusset plate which is welded to the beam flange. Two bolts acting in shear connect the gusset plate to the web of the T-section. This way the connection can act in tension or compression. Experimental pull-out tests on individual connections allowed their load deflection characteristics to be established. A full scale experiment was performed on a one-storey one-bay 3 by 3 m infilled frame structure which was horizontally loaded at the top. With the characteristics of the frame-to-panel connections obtained from the experiments on individual connections, finite element analyses were performed on the infilled frame structures taking geometric and material non-linear behaviour of the structural components into account. The finite element model yields reasonably accurate results. This allows the model to be used for further parametric studies.
Risk regarding the possibility of loss can be especially problematic. If a loss is certain to occur, it may be planned for in advance and treated as a definite, known expense. It is when there is uncertainty about the occurrence of a loss that risk becomes an important problem. The word risk is often used in connection with insurance. No one generally accepted definition of risk exists, however. Of the many definitions, two distinctive ones are commonly used. One defines risk as the variation in possible outcomes of an event based on chance. That is, the greater the number of different outcomes that may occur, the greater the risk. Another way of expressing this concept is to state: The greater the variation around an average expected loss, the greater the risk. The second definition of risk is the uncertainty concerning a possible loss. The definition of risk as a useful one because it focuses attention on the degree of risk in given situations. The degree of risk is a measure of the accuracy with which the outcome of an event based on chance can be predicted. For now, it will serve our purpose to note the more accurate the prediction of the outcome of an event based on chance, the lower the degree of risk. After sources of risks are identified and measured, a decision can be made as to how the risk should be handled. A pure risk that is not identified does not disappear, the business merely loses the opportunity to consciously decide on the best technique for dealing with that risk. The process used to systematically manage risk exposures is known as risk management. Some persons use the term risk management only in connection with businesses, and often the term refers only to the management of pure risks. In this sense, the traditional risk management goal has been to minimize the cost of pure risk to the company. But as firms broaden the ways that they view and manage many different types of risk, the need for new terminology has become apparent. The terms integrated risk management and enterprise risk management reflect the intent to manage all forms of risk, regardless of type. International trade transaction is called between countries has features of globalism, cultural gap, long distance and long terms for the transaction. It is riskier than domestic transaction has its specific risks, such as foreign exchange risk and political risk, and requires various active risk management skills. Risks in relation to the international trade transaction are the contract risk, transit risk and payment risk, etc. The risk management in relation to the international trade transaction is to identify and measure these risks. The purpose of this study is to analyse the practical problems and its solution plan by analyzing various cases related to the risk management of bill of lading in the international trade transaction.
Journal of International Academy of Physical Therapy Research
/
v.1
no.1
/
pp.26-31
/
2010
The purpose of this study was to investigate perceived health status, activities of daily living and depression of the elderly in nursing facilities and to identify correlations among them. The collected data is to improve healthy life for the aged people in communities. This study was performed by using of questionnaire which was consisted of perceived health status, activity of daily living(ADL) and depression. The survey was conducted by 180 aged people at nursing homes. The results of perceived health status show that 64.9% of elderly feel very bad or bad, 61.6% of elderly have a degree of independent level of activity of daily living(ADL) and 48.6% of elderly have a degree of depression. There were statically revealed meaningful correlation between ability of activity of daily living(ADL) and perceived health status, ability of activity of daily living(ADL) and depression. This study about connection among perceived health status, activity of daily living(ADL) and depression is necessary for number of the affiliation function of elderly at nursing homes and development of intervention programs concerned about depression are necessary.
Transactions of the Korean Society of Mechanical Engineers B
/
v.26
no.9
/
pp.1209-1217
/
2002
The use of a two dimensional hierarchical elements are investigated for the incompressible flow computation. The construction of hierarchical elements are explained by both a geometric configuration and a determination of degrees of freedom. Also a systematic treatment of essential boundary values has been developed for the degrees of freedom corresponding to higher order terms. The numerical study for the poisson problem shows that the computation with hierarchical higher order elements can increase the convergence rate and accuracy of finite element solutions in more efficient manner than the use of standard first order element. for Stokes and Cavity flow cases, a mixed version of penalty function approach has been introduced in connection with the hierarchical elements. Solutions from hierarchical elements showed better resolutions with consistent trends in both mesh shapes and the order of elements.
Jo Jang-Gun;Kim Jong-Won;Seo Jae-Yong;Cho Hyun-Chan;Cho Tae-Hoon
Proceedings of the Korean Institute of Intelligent Systems Conference
/
2006.05a
/
pp.237-240
/
2006
Human's sight holds the most extents among other senses. It will become more beneficial in person's emotion or body, if we form much better environment to human in connection with visual information as importance of visual information. Human is using a lot of display units on modern society. Basic colors that compose these are Red, Green and Blue. Using these three colors, we can change color sense of monitor or brightness degree. Suitable color degree by individual's environment can reduce person's stress or give comfortable feeling. So Factors by human's emotion and environment are standardized using fuzzy and the method that is to apply the result of Intelligent Color Control(ICC) on display is proposed.
The purpose of this paper is to disclose the characteristics of knowledge in the age of digital reproduction. To achieve this I extended Benjamin's concept of technological reproduction to three different stages as mechanical reproduction, electric reproduction and digital reproduction. Each stage has different degree of reproducibility and de-materialization. I also combined McLuhan's concept of the electricity at the point of de-materialization with reproducibility. The degree of materiality and reproducibility is the key concept which could scale the technical condition of knowledge production. The social condition of knowledge reproduction is controlled by economic and political factors. In this connection between technological and social condition the current knowledge production and intellectual property could be explained properly. This study could open the theoretical door to deepen such an understanding.
Monthly changes in communities of benthic macroinvertebrates collected in the Suyong and Soktae stream of the Suyong river were investigated from September 1993 to August 1994. The total number of species collected during the study period ranged from seven to seventy six species according to pollution levels at the study sites. Monthly changes in species richness appeared differently in different taxonomic assemblages. In chironomids differences in species richness responding to different levels of saprobity were shown consistently as time proceeded. In Ephemeroptera species richness at the relatively clean sites responded sensitively to slight enrichment. In connection with species richness the monthly changes in densities in taxonomic assemblages also appeared to effectively represent environmental impacts. Species diversity generally represented the pollution status also, however the monthly variations at the study sites appeared to be relatively high. The clustering analysis showed that the communities collected at polluted sites were grouped closely, and the communities collected at the relatively clean sites were clustered to the same stream although the degree of community association was low, Through the Principal Component Analysis, the impact of Pollution was reflected in a great degree in overall community variations.
Purpose: The purpose of this study was to explore the link between health and welfare service and barrier's factors by reviewing the connection between the public health center's visiting nurse and social welfare center's social workers Method: A survey by mail or a face-to-face interview of 151 visiting nurses in 25 public health centers and 48 social welfare workers in general social welfare centers in Seoul, was preformed from Feb. 12, 2001 to Mar. 15, 2001. The data were analyzed with frequency, percentage, mean value, paired t-test and independent t-test using SPSS/WIN 7.5 program. Result: 1. ‘The necessity and degree of cooperation with social welfare workers of visiting nurse’ scored average 4.49 and 3.19, and ‘The necessity and degree of cooperation with visiting nurse and social welfare workers’ scored average 4.81 and 3.15 on the five-point scale ; there was a significant difference between the two variable in visiting nurse and social welfare workers. 2. In barrier's factors which health and welfare service offer to, visiting nurses showed statistically significant higher score than social welfare staff; ‘job factor’, ‘resource factor’, ‘clients factor’, ‘individual ability factor’ Conclusion: In order to provide link system that hold clients in common in public health center and social welfare center, it is recommended a case management team should be constructed and educate visiting nurses for case manager.
Uncertainty associated with a sampling method is very high in evaluating the degree of site contamination; therefore, such uncertainty affects the reliability of precise investigation and remediation verification. In particular, in evaluating a site for a small-sized filling station, underground utilities, such as connection pipes and oil storage tanks, make grid-unit sampling impossible and the resulting increase in uncertainty is inevitable. Accordingly, this study quantified the uncertainty related to the evaluation of the degree of contamination by total petroleum hydrocarbon and by benzene, toluene, ethylene, and xylene. When planning a grid aimed at detecting a hot spot, major factors that influence the increase in uncertainty include grid interval and the size and shape of the hot spot. The current guideline for soil sampling prescribes that the grid interval increase in proportion to the area of the evaluated site, but this heightens the possibility that a hot spot will not be detected. In evaluating a site, therefore, it is crucial to estimate the size and shape of the hot spot in advance and to establish a sampling plan considering a diversity of scenarios.
The purpose of this study is to explore professors' perception of blended learning. For this purpose, the reflective journals written by 56 university professors was analyzed using the keyword network analysis method. The results of this study are as follows: First, as a result of keyword frequency analysis for the blended learning, the keywords showed the highest frequency in the order of (1) 'instructional design', 'student', 'instructional method', 'learning objective' in the area of learning, (2) 'importance', 'instruction', 'feeling', 'student' in the area of feeling, and (3) 'semester', 'plan', 'weekly', and 'instruction' in the area of action plan. Second, the results of analyzing the degree, closeness centrality, and betweenness centrality of network connection are as follows. (1) The keywords 'instruction', 'instructional method', 'instructional design', and 'learning objective' in the area of learning, (2) the keywords 'instruction', 'importance', and 'necessity' in the area of feeling, and (3) 'instruction', 'plan', and 'semester' in the area of action plan showed high values in degree, closeness centrality, and betweenness centrality. Based on the research results, implications for blended learning and professors' perception were discussed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.