• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1285-1289
• /
• 2004

Elman Discrete Recurrent Neural Networks Model(EDRNNM) was used to be a suitable short-term hydrological forecasting tool yielding a very high degree of flood stage forecasting accuracy at Musung station of Wi-stream one of IHP representative basins in South Korea. A relative new approach method has recurrent feedback nodes and virtual small memory in the structure. EDRNNM was trained by using two algorithms, namely, LMBP and RBP The model parameters, optimal connection weights and biases, were estimated during training procedure. They were applied to evaluate model validation. Sensitivity analysis test was also performed to account for the uncertainty of input nodes information. The sensitivity analysis approach could suggest a reduction of one from five initially chosen input nodes. Because the uncertainty of input nodes information always result in uncertainty in model results, it can help to reduce the uncertainty of EDRNNM application and management in small catchment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1237-1252
• /
• 2010

This paper proposes an intelligent technique for data sharing and event transition among personal devices including smart phones, laptops, and desktops. We implemented the PES (Personal Event Service) system that proactively executes appropriate tasks across multiple devices without explicit user requests by sharing the data used by the user and recognizing user intention based on the observed actions of the user for specific devices. The client module of PES installed on each device monitors the user actions and recognizes the intention of the user. The server provides data sharing and maintenance for clients. The connection between client and server is established by Java RMI (Remote Method Invocation). A series of experiments were performed to evaluate user satisfaction and system accuracy, and the results showed that the PES system can proactively provide appropriate, personalized services with a high degree of satisfaction to the user in an effective and efficient manner.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1490-1495
• /
• 1998

Call packing has been recognized as a routing scheme that significantly reduces the blocking probability of connection requests in a circuit-switched Clos multistage interconnection network. In this paper, for the first time, a general analytical model for the point-to-point blocking probability of the call-packing scheme applied to Clos networks is developed. By introducing a new parameter called the degree of call packing, the model can correctly estimate the blocking probability of both call-packing and random routing schemes. The model is verified by computer simulation for various size networks and traffic conditions.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.27-34
• /
• 1998

A versatile flat shell element has been developed by combining a membrane element with drilling degree-of-freedom and a plate bending element. This element is formulated by the enhanced displacement field with the additional non-conforming displacement modes. Thus the element possesses six degrees-of-freedom (DOF) per node which permits an easy connection to other six DOF elements as well as the improvement of the element behavior. In plate bending part, this element is established by the combined use of the addition of non-conforming modes, the reduced (or selective) integration scheme, and the construction of the substitute shear strain fields. The achieved improvement may be attributable to the fact that the merits of these individual techniques are merged into the new element in a complementary manner. In membrane part, this element shows better membrane behavior as the nonconforming displacement mode is added to drilling mode.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.6
• /
• pp.296-302
• /
• 2001

This paper proposes a SSSC based on multi-bridge inverters. The dynamic characteristic of the proposed SSSC was analyzed by EMTP simulation and a scaled hardware model, assuming that the SSSC is inserted in the transmission line of the one-machine-infinite-bus power system. The proposed SSSC has 6 multi-bridge inverters per phase, which generates 13 pulses for each half period of power frequency. The proposed SSSC generates a quasi-sinusoidal output voltage by 90 degree phase shift to the line current. The proposed SSSC does not require the coupling transformer for voltage injection, and has a flexibility in operation voltage by increasing the number of series connection.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.27-30
• /
• 2000

In this paper, we propose a new dynamic bandwidth allocation and call admission control method for the VBR video sources with QoS constraints to provide user's quality of service requirements and at the same time to achieve an efficient resource management in networks. The proposed mechanism dynamically adjusts the necessary bandwidth by the networks based on the provided quality of service satisfaction degree of each connection in respect to the user's requirements in terms of loss ratio and average delay Simulation results show that our proposed dynamic method is able to provide the desired level of quality of service and high utilization.

• Steel and Composite Structures
• /
• v.10 no.3
• /
• pp.281-295
• /
• 2010

An experimental and a non linear finite element investigation on the behavior of steel-concrete composite beams stiffened in hogging moment region with Carbon Fiber Reinforced Plastics (CFRP) sheets is presented in this paper. A total of five specimens were tested under two-point loads. Three of the composite beams included concrete slab while the other two beams had composite slabs. The stiffening was achieved by attaching CFRP sheets to the concrete surface at the position of negative bending moment. The suggested CFRP sheets arrangement enhanced the overall beam behavior and increased the composite beam capacity. Valuable parametric study was conducted using a three dimensional finite element model using ANSYS program. Both geometrical and material nonlinearity were included. The studied parameters included CFRP sheet arrangement, concrete strength and degree of shear connection.

• Structural Engineering and Mechanics
• /
• v.25 no.4
• /
• pp.405-421
• /
• 2007

A four-node hybrid stress element for analysing orthotropic folded plate structures is presented. The formulation is based on Hellinger-Reissner variational principle. The element is developed by combining a hybrid plane stress element and a hybrid plate element. The proposed element has six degree of freedom per node and permits an easy connection to other type of elements. An equilibrated stress field in each element and inter element compatible boundary displacement field are assumed independently. Static and free vibration analyses of folded plates are carried out on numerical examples to show that the validity and efficiency of the present element.

• Magazine of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.25-36
• /
• 2008

Seismic design of reinforced concrete flat plate structures is often complicated as it deals with three dimensionality and continuous spans, and mostly material complexity and reinforcement variation. A great degree of uncertainty in such structural and material properties is thus inherent in the RC flat plate systems, and hinders simplification of the design process in terms of slab flexure, unbalanced moment transfer at a slab-column connection, and punching shear. For these reasons, there have been substantial changes and updates in building codes relating to flat plates and slab-column connections over a handful of decades. Also, for the same reason, some of codes never have been revised. As a consequence of nonsimultaneous development of each provision, it tends to confuse structural engineers when using a mixture of all different US code provisions. In this paper, in the step-by-step logical order, seismic design of the RC flat plate systems is re-organized and clarified to make it easier to apply. Furthermore, recent changes or proposed changes are introduced, and are explained as to how it will apply in practice.

• Journal of Engineering Education Research
• /
• v.23 no.5
• /
• pp.61-67
• /
• 2020

In the associate degree curriculum of the department of mechanical engineering, the results of the study are presented on the structure and content of a subject based on the case-based learning method. As an case, equipment called a laminator that is actually used in the manufacturing site was selected. Class deals with specific engineering issues at each stage of laminator manufacturing (design-machining-assembly-measurement-maintenance) in connection with general engineering topics in prerequisites in the curriculum. Topics include tolerance fit, length measurement, assembly practice, measurement design and statistics of machine maintenance, etc. Courses that apply the case-based learning method may be included in the curriculum as complementary roles to those that apply other student-centered learning method.