• 제목/요약/키워드: connection coefficient matrix

검색결과 8건 처리시간 0.021초

Condensation of independent variables in free vibration analysis of curved beams

  • Mochida, Yusuke;Ilanko, Sinniah
    • Advances in aircraft and spacecraft science
    • /
    • 제3권1호
    • /
    • pp.45-59
    • /
    • 2016
  • In this paper, the condensation method which is based on the Rayleigh-Ritz method, is described for the free vibration analysis of axially loaded slightly curved beams subject to partial axial restraints. If the longitudinal inertia is neglected, some of the Rayleigh-Ritz minimization equations are independent of the frequency. These equations can be used to formulate a relationship between the weighting coefficients associated with the lateral and longitudinal displacements, which leads to "connection coefficient matrix". Once this matrix is formed, it is then substituted into the remaining Rayleigh-Ritz equations to obtain an eigenvalue equation with a reduced matrix size. This method has been applied to simply supported and partially clamped beams with three different shapes of imperfection. The results indicate that for small imperfections resembling the fundamental vibration mode, the sum of the square of the fundamental natural and a non-dimensional axial load ratio normalized with respect to the fundamental critical load is approximately proportional to the square of the central displacement.

그룹 테크놀러지에서의 기계 및 부품군을 형성하기 위한 발견적 해법 (A heuristic algorithm for forming machine cells and part families in group technology)

  • 이백
    • 대한산업공학회지
    • /
    • 제22권4호
    • /
    • pp.705-718
    • /
    • 1996
  • A similarity coefficient based algorithm is proposed to solve the machine cells and part families formation problem in group technology. Similarity coefficients are newly designed from the machine-part incidence matrix. Machine cells are formed using a recurrent neural network in which the similarity coefficients are used as connection weights between processing units. Then parts are assigned to complete the cell composition. The proposed algorithm is applied to 30 different kinds of problems appeared in the literature. The results are compared to those by the GRAFICS algorithm in terms of the grouping efficiency and efficacy.

  • PDF

포렌식 마킹을 위한 특징점 기반의 동적 멀티미디어 핑거프린팅 코드 설계 (A Design on the Multimedia Fingerprinting code based on Feature Point for Forensic Marking)

  • 이강현
    • 전자공학회논문지CI
    • /
    • 제48권4호
    • /
    • pp.27-34
    • /
    • 2011
  • 본 논문에서는 멀티미디어 콘텐츠 보호에 대한 반공모 코드를 위한 동적 멀티미디어 핑거프린팅 코드를 설계하는 알고리즘을 제안한다. 기존의 반공모 코드(ACC: Anti-Collusion Code)를 위한 멀티미디어 핑거프린팅 코드는 BIBD(Balanced Incomplete Block Design)의 접속행렬을 보수행렬로 변환하여 k를 k+1로 증대시키는 수리적 방법으로 설계되었다. 그리고 보수행렬의 코드벡터를 사용자에게 핑거프린팅 코드로 부여하고, 콘텐츠에 삽입하였다. 제안된 알고리즘에서는 사용자가 구매하는 콘텐츠로부터 특징점을 추출하고, 이를 기반으로 동적으로 핑거프린팅 코드를 설계할 수 있도록 BIBD의 v와 k+1 조건을 만족하는 반공모 코드의 후보성 코드를 코드북(Codebook)에 구축하고 ${\lambda}+1$ 조건을 만족하는 행렬(이하, Rhee행렬이라 함.)을 생성한다. 실험을 통하여 콘텐츠의 특징점 기반으로 생성된 Rhee행렬의 코드벡터는 v비트의 유의수준 ($1-{\alpha}$)에서 신뢰구간에 k가 존재하며, Rhee행렬의 각 행과 행, 열과 열 사이의 유클리디안 거리가 BIBD 기반의 보수행렬과 그래프 기반의 보수행렬과 같은 k값이 산출되었다. 더욱이 Rhee행렬의 첫 행과 첫 열은 생성과정에서 초기 점화벡터로 콘텐츠 포렌식 마크 정보가 되며, 이와 관계가 있는 나머지 코드벡터들과의 관계성이 코드북에 기록되어 있기 때문에, 공모된 코드를 추적할 때 원 핑거프린팅 코드의 상관관계 계수를 구할 필요 없이 코드북의 탐색으로 공모자를 추적이 용이하다. 따라서 본 논문에서 생성된 Rhee행렬은 수리적으로 생성된 BIBD 기반의 행렬보다 ACC로서 강인성과 충실도가 우수하다.

임업부문(林業部門)과 타산업부문간(他産業部門間)의 산업관련분석(産業關聯分析)에 관(關)한 연구(研究) (A Study on Interindustry Analysis between Forestry Sector and Other Industrial Sector)

  • 김종호;박태식
    • 한국산림과학회지
    • /
    • 제68권1호
    • /
    • pp.1-10
    • /
    • 1985
  • 본(本) 연구(硏究)는 국민경제(國民經濟)의 순환(循環)속에서 임업(林業) 및 임산가공산업(林産加工産業)의 위치(位置)와 구조(構造)를 파악하고자 1970년(年), 1975년(年), 1980년(年) 산업연관표(産業聯關表)를 자료(資料)로서 임업(林業) 및 임산가공산업(林産加工産業)을 중심(中心)으로 한 19 부문표(部門表)를 작성(作成)하고, 그것을 이용(利用)하여 투입계수(投入係數) 및 역행렬계수(逆行列係數)를 구함으로서 임업(林業) 및 임산가공산업(林産加工産業)과 타산업간(他産業間)의 연관구조변화(聯關構造變化)를 분석(分析)한 결과, 1970년(年)에서 1980년간(年間)에 경제구조(經濟構造)가 전환(轉換)됨에 따라 임업(林業)의 상대적(相對的) 비중(比重)은 감소(減少)하고 있으나, 구조적(構造的)으로는 중간수요적(中間需要的) 원시산업형(原始産業型)인 특성(特性)이 있으며 중간수요비(中間需要比)가 증가(增加)하고 있어 다른 산업(産業)에 대한 공급산업(供給産業)으로서 중요(重要)한 역할을 하고 있다. 특히 임산물(林産物)의 수입계수(輸入計數)는 타산업(他産業)에 비해 크고 증가추세(增加趨勢)에 있다.

  • PDF

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

유한한 두께를 갖는 평판 상의 주기적 슬롯이 배열된 다중스크린 구조의 전자파 모드 해석 (Electromagnectic Modal Analysis for the Multiscreen Structure with Periodic Slot Array Including Conductor Thickness Effect)

  • 고지환;조영기
    • 대한전자공학회논문지TC
    • /
    • 제40권11호
    • /
    • pp.1-9
    • /
    • 2003
  • 본 논문에서는 유전체 위에 도체 평판 상의 주기적 술롯이 배열된 다중 스크린 구조에 대한 전자파 해석 방법을 제시하였다. 이런 다중스크린 구조는 위상 변위 벽으로 둘려 싸여진 마이크로웨이브 도파관처럼 볼 수 있어, 모드 해석 방법으로 각 불연속면에서 산란행렬을 구하고 도파 구간에는 전송 산란행렬을 구하여 직렬 연산하여 다중스크린의 전체 산란행렬을 계산하는 방법을 사용하였다. 본 해석 방법을 검증하기 위해 단일스크린 구조에서 기존의 모멘트 방법으로 계산한 결과와 비교하였으며 타당함을 확인하였다. 본 해석의 적용 예로 공간여파기를 설계하여 각도와 주파수에 따른 투과 및 반사 계수의 특성을 분석하였다.

CANDU-6 열수송 계통의 유동 진동감쇠에 의한 유동안정성 연구 (An Investigation on Flow Stability with Damping of Flow Oscillations in CANDU-6 heat Transport System)

  • 김태한;심우건;한상구;정종식;김선철
    • 소음진동
    • /
    • 제6권2호
    • /
    • pp.163-177
    • /
    • 1996
  • An investigation on thermohydraulic stability of flow oscillations in the CANada Deuterium Uranium-600(CANDU-6) heat transport system has been conducted. Flow oscillations in reactor coolant loops, comprising two heat sources and two heat sinks in series, are possibly caused by the response of the pressure to extraction of fluid in two-phase region. This response consists of two contributions, one arising from mass and another from enthalpy change in the two-phase region. The system computer code used in the investigation os SOPHT, which is capable of simulating steady states as well as transients with varying boundary conditions. The model was derived by linearizing and solving one-dimensional, homogeneous single- and two-phase flow conservation equations. The mass, energy and momentum equations with boundary conditions are set up throughout the system in matrix form based on a node-link structure. Loop stability was studied under full power conditions with interconnecting the two compressible two phase regions in the figure-of-eight circuit. The dominant function of the interconnecting pipe is the transfer of mass between the two-phase regions. Parametric survey of loop stability characteristics, i. e., damping ratio and period, has been made as a function of geometrical parameters of the interconnection line such as diameter, length, height and orifice flow coefficient. The stability characteristics with interconnection line has been clarified to provide a simple criterion to be used as a guide in scaling of the pipe.

  • PDF

트리구조의 비균일한 대역폭을 갖는 Delayless 서브밴드 필터 구조 (Nonuniform Delayless Subband Filter Structure with Tree-Structured Filter Bank)

  • 최창권;조병모
    • 한국음향학회지
    • /
    • 제20권1호
    • /
    • pp.13-20
    • /
    • 2001
  • 음향 에코우제거기나 소음제어와 같은 임펄스 응답이 긴 디지털 필터를 이용하여 필터링을 할 경우 수렴속도가 느리고 계산시간이 많이 걸린다. 이러한 기존의 필터링에서 생기는 계산시간이나 수렴속도 문제를 개선하기 위해서 서브밴드 필터링과 멀티레이트 신호처리 기술이 개발되었다. 모든 시스템의 전달함수는 interpolator와 임펄스 응답사이에 임의 수만큼의 0이 들어있는 sparse 임펄스 응답을 갖는 서브필터를 직렬로 연결한 구조로 표현할 수 있다. 이 경우에 interpolator는 Hadamard 행렬로 표현되고 저역통과필터 특성을 갖는 원형필터를 균일하게 이동시킨 것과 같다. 그래서 입력신호를 Hadamard 변환을 이용하여 각 서브대역으로 분할하고 decimation을 하여 샘플링 레이트를 줄이는 멀티레이트기술이 음향 함수 모델링이나 잡음제거에 응용할 수 있다. 본 논문에서는 decimation으로 생기는 에리어싱을 제거하고 수렴속도를 향상시키기 위해서 입력 신호를 트리구조를 갖는 필터뱅크를 이용하여 비균일한 서브대역으로 분할, 그리고 decimation을 하여 샘플링레이트를 변환하고 각 서브대역에서 계수를 갱신한 후 이 계수를 전대역으로 Hadamard 변환을 이용하여 변환하는 비균일한 대역폭을 갖는 delayless 필터 구조를 제안하고 이 구조를 컴퓨터 시뮬레이션을 통하여 성능을 검증한다.

  • PDF