• 제목/요약/키워드: connection bar

검색결과 163건 처리시간 0.023초

고강도 콘크리트와 GFRP 보강근을 사용한 보-기둥 접합부 휨 실험 (Flexural Test on Beam-Column Connections Using High Strength Concrete and GFRP bars)

  • 이혜진;김시준;양근혁;박상훈
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 추계 학술논문 발표대회
    • /
    • pp.177-178
    • /
    • 2017
  • The beam-column connection using high-strength GFRP bars exhibited a comparable flexural strength but brittle failure mode, when compared with those of connection using high-strength steel reinforcement.

  • PDF

Do Bars Trigger Activity in Galactic Nuclei?

  • 이광호;우종학;이명균;황호성;이종철;손주비;이종환
    • 천문학회보
    • /
    • 제36권2호
    • /
    • pp.75.1-75.1
    • /
    • 2011
  • We investigate the connection between the presence of bars and AGN activity, using a volume-limited sample of ~6,000 late-type galaxies with axis ratio b/a > 0.6 and $M_r=-19.5+5logh$ at low redshift (0.02 < z ${\leq}$ 0.055), selected from Sloan Digital Sky Survey Data Release 7. Although bars are believed to play an important role in fueling AGNs, it is still an open question whether AGN activity is connected with the presence of bars. We find that the bar fraction in AGN-host galaxies (44.1%) is 2.5 times higher than in non-AGN galaxies (17.6%), implying an AGN-bar connection. However, this trend is simply caused by the fact that AGN-host galaxies are on average more massive and redder than non-AGN galaxies since the bar fraction increases with u-r color and velocity dispersion. When AGN-host and non-AGN galaxies with fixed u-r color and velocity dispersion are compared, the excess of bar fraction in AGN-host galaxies disappears. Among AGN-host galaxies we find no strong difference of the Eddington ratio distributions between barred and non-barred systems. These results indicate that AGN activity is not directly connected with the presence of bars.

  • PDF

두풍(頭風)과 편두통(Migraine)에 대(對)한 동서의학적(東西醫學的) 문헌고찰(文獻考察) (The biblographical study on $T{\acute{o}}u\;f{\bar{e}}ng$ and Migraine -(Comparative study between Oriental and Western Medicine)-)

  • 오소조;정지천;이원철
    • 대한한방내과학회지
    • /
    • 제14권1호
    • /
    • pp.129-138
    • /
    • 1993
  • This report on the $T{\acute{o}}u\;f{\bar{e}}ng$ and Migraine comes to conclude, through the study of the Oriental- Western medical references, as follow; 1. First, $T{\acute{o}}u\;f{\bar{e}}ng$ and Migraine had some concurrencies that both the two symptoms have appeared severe and recurrent headache and more often to the female. 2 Many of them e.g. Sensory disturbance, Vertigo, Nausea, Vomiting, Tinnitus etc. in the prodrome and main symptom of $T{\acute{o}}u\;f{\bar{e}}ng$ and Migraine were identical, especially the symptom of the $f{\bar{e}}ng\;t{\acute{a}}n\;t{\acute{o}}u\;t{\grave{o}}ng$ was similar to the prodrome of the Migraine. We could find out the semilarity of the symptoms through that Migraine is proximately set in unilateral, and $Pi{\bar{a}}nT{\acute{o}}u\;f{\bar{e}}ng$ is so called alias $B{\grave{a}}n\;bi{\bar{a}}n\;t{\acute{o}}u\;t{\grave{o}}ng$. 3. The pathogeny of $T{\acute{o}}u\;f{\bar{e}}ng$ include the case of ‘$f{\bar{e}}ng\;xi{\acute{e}}\;r{\grave{u}}\;n{\bar{a}}o$’, the patient feeling weak condition, $T{\acute{a}}n,\;T{\acute{a}}nshi,\;T{\acute{a}}nhu{\breve{o}},\;Y{\grave{u}}q{\grave{i}}$, etc. and, ‘$t{\acute{a}}n\;zhu{\grave{o}}\;sh{\grave{a}}ng\;y{\acute{a}}o$’, ‘$G{\bar{a}}n\;y{\acute{a}}ng\;hu{\grave{a}}\;f{\bar{e}}ng$’. There were variable that $F{\bar{e}}ng,\;Xu{\grave{e}},\;F{\bar{e}}ngr{\grave{a}},\;F{\bar{e}}ngx{\bar{u}},\;Xu{\grave{e}}x{\bar{u}},\;Hu{\check{o}}$ in the left, and $t{\acute{a}}n,\;R{\grave{e}},\;t{\acute{a}}nr{\grave{e}},\;Qir{\acute{a}}$ in the right partial pathogeny. It was referred $Sh{\grave{a}}o\;y{\acute{a}}ng\;j{\bar{i}}ng$, $Ju{\acute{e}}\;y{\bar{i}}n\;j{\bar{i}}ng$, $Y{\acute{a}}ng\;m{\acute{i}}ng\;j{\bar{i}}ng$, $T{\grave{a}}i\;y{\acute{a}}ng\;j{\bar{i}}ng$ in connection with the Meridian system. And otherwise the primary cause of Migraine is still unknown to us. Heredity is probably important, but the mode of transmission is uncertain. Recently, the important assumption is the vasomotor change caused by vasoconstrictors like that norepinephrine, epinephrine, and serotonin etc.

  • PDF

PS 강봉으로 일체화된 강합성 라멘교의 거더-교대 접합부에 대한 피로 성능 평가 (Fatigue Capacity Evaluation of the Girder-Abutment Connection for the Steel-Concrete Composite Rigid-Frame Bridge Integrated with PS Bar)

  • 안영수;오민호;정지승;이상윤
    • 콘크리트학회논문집
    • /
    • 제24권3호
    • /
    • pp.249-258
    • /
    • 2012
  • 교대 일체식 교량과 강합성 라멘교는 유지보수의 주된 원인이 되는 신축이음 및 받침이 생략되어 유지관리 및 구조적인 장점을 얻을 수 있는 교량 형식이다. 하지만, 통상적으로 거더를 교대에 매립하는 형태로 시공되는 접합부는 시공상세가 복잡하고 접합부의 시공상세를 간략화하여 시공효율을 향상시킨 새로운 교량 형식을 제안하였다. 제안된 형식의 교량은 PS 강봉에 긴장력을 도입하여 강재로 제작된 거더와 교대를 일체화하는 형태의 교량이다. 이 연구에서는 PS 강봉으로 일체화된 접합부의 피로 성능을 평가하기 위하여 접합부에 대한 유한요소해석 및 피로실험을 실시하였다. 유한요소해석 결과, 제안된 교량의 접합부는 기본적으로 피로에 의한 손상의 가능성이 매우 낮은 것으로 나타났으며, 피로시험 결과로부터 2,000,000회의 피로반복하중이 재하된 상태에서도 접합부의 일체화 성능을 유지하고 있는 것을 확인할 수 있었다.

Bar effects on the central SF and AGN activities in the SDSS galaxy sample

  • Kim, Minbae;Choi, Yun-Yung;Kim, Sungsoo S.
    • 천문학회보
    • /
    • 제41권1호
    • /
    • pp.35.3-36
    • /
    • 2016
  • We explore the role of bars in AGN-galaxy co-evolution using a volume-limited face-on late-type galaxy sample with $M_r$ < -19.5 and 0.02 < z < 0.055 selected from SDSS DR7. In this study, we investigate how $SFR_{fib}$ as a proxy of gas contents at galactic center (over 1~1.5 kpc bulge scale) and central stellar velocity dispersion, ${\sigma}$, of host galaxies are connected to the bar presence and AGN activity. We find that galaxies are distributed in three distinct regions over the $SFR_{fib}-{\sigma}$ space and the behaviors of their bar fraction ($f_{Bar}$) are clearly different for each region. Galaxies at the AGN dominant region tend to be gas-deficient as $f_{Bar}$ increases and bars are more frequently found in fully-quenched late-type galaxies at the quiescent region, suggesting that bars speed up of the consumption of gas by SF and lead a sudden decline in the central gas. Overall, the bar effects on the AGN activity are positive over the same space except for quiescent galaxies with ${\sigma}$ > $170km\;s^{-1}$. Most significant bar effect on the AGN activity occurs in the less massive galaxies having sufficient gas, whereas the effect on galaxies at the AGN dominant region with higher the AGN fraction is relatively small. We suggest that the bar affect both central SF and AGN activities, but differently for central gas amount and BH (or bulge) mass of galaxies. We also investigate the AGN-bar connection with only pure AGNs and then confirm that they give marginally the same results.

  • PDF

부스 바의 체결 및 중첩 구간에 따른 접촉 저항에 관한 연구 (A Study on the Contact Resistance according to the Tightening and Overlapping area of Bus Bar)

  • 김현우;손영득
    • 한국산학기술학회논문지
    • /
    • 제19권7호
    • /
    • pp.56-62
    • /
    • 2018
  • 부스 바는 초고층 빌딩의 전력공급과 플랜트 산업의 전원 공급부 및 장비 제조 산업 분야의 배전반에 널리 사용되는 전기적인 접속 구조이다. 부스 바의 설계 시 고려해야 할 사항으로 사용 환경에 따른 재질, 전원 용량에 따른 단면적, 표면둘레의 길이, 체결 방법 등이 있다. 설계 시 충분한 전원 용량의 사이즈로 제작된 부스 바의 경우에도 실제 체결이 잘못 될 경우 열화에 의한 화재로 이어질 수 있다. 이러한 이유로 전기적 접촉부의 온도 상승에 대한 다양한 연구가 지속되어 왔다. 그러나 접촉부의 온도 상승은 결과에 기인한 현상이지 직접적인 원인은 아니다. 본 논문은 부스 바의 체결력과 중첩 구간에 따른 접촉 저항의 영향성에 대한 연구로 시편을 제작하여 저항의 변화를 측정하여 영향력을 분석하였다. 총 8개의 부스 바시편을 제작하여 측정하였고 각각의 시편을 교차하여 체결시 가해지는 체결력과 중첩 구간의 간격을 가변하여 저항을 측정하였다. 실험 결과를 통해 이러한 요인이 실제 접촉 저항의 변화에 어느 정도 기여하는지를 분석하여 안전한 전원 연결 장치의 모델을 제시하고자 한다.

편심회전 봉형 절단장치의 절단 및 진동 특성에 관한 연구 (A Study on the Cutting and Vibratory Characteristics of the Eccentrically Rotating Cutter-Bar System)

  • 송현갑;정창주
    • 한국농공학회지
    • /
    • 제17권3호
    • /
    • pp.3885-3893
    • /
    • 1975
  • This work was intended to study the cutting graph and vibratory phenomina of a newly developed mower which may be suitable for mowing agricultural product having large and hard stems like corn and sugar beet. The system consists of cutter-bar having Curvilinear-translation motion, which attached to drag-crank mechanism. The motion of equation developed for experimental vibratory system which equipped with the cutter-bar system was established and the parameters defining the system's vibratory motion were experimentally determined. The optimum balancing weight for the cutter-bar am vibratory characteristics of the cutter-bar for various counterweight were analyzed to provide the design and operational conditions. The results of the study are summarized as follows; (1) The cutting graph by the new cutter-bar system depends upon the magnitude of ratio of forward travel(Vm) to crank speed (R$\omega$); The cutting pitch for Vm/R$\omega$ 1 (whole cycle cutting) and Vm/R$\omega$=2/$\pi$ (a half cycle cutting) are 2$\pi$ Vm and 4R, respectively. (2) The experimental vibratory system had been proved to function adequately so that it can be used in determining the required counterweight to minimize the vibratory motion of cutter-bar. (3) Experimentally determined counterweight to give the least vibratory motion was a little greater than the theoretically determined one. With the optimum counterweight it was possible to reduce up to about 87% of the amplitude without counterweight, which may be considered to be within safe operational region. (4) To avoid the actual operation of the cutter-bar at resonance which occured in low frequency ratio, it was considered that the rotational speed of the crank for a specific design of mower should be determined separately in connection with the desired cutting graph.

  • PDF

자동물꼬의 개발 (Development of the Automatic Inlet)

  • 정하우;이남호;김성준;최진용;한형근;김대식
    • 한국농공학회지
    • /
    • 제37권1호
    • /
    • pp.49-54
    • /
    • 1995
  • Three types of floating-type automatic inlet were developed for the purpose of reduc- ing farmer's working hours required for water management and saving irrigation water. The point of automation is to use a float within the inlet which is floated and sinked by the ponding depth of paddy field, Thus opens and closes the control gate of irrigation. Suitability of each inlet may depend on production cost, applicability to paddy field condi- tions, and feasibility to farmers, etc. The first model was composed of three parts : chamber for irrigation control gate, chamber for float controlled by ponding depth, and connection bar between the two parts. It was designed to open and close the control gate gradually as the ponding depth drops and rises to a certain level. The second model was designed to improve the weak point of the first model which is the imperfect-closing of gate when it approaches to the end of ir- rigation. A switch-spring was equipped above the connection bar for perfect opening and closing of gate when the ponding depth reaches to a certain level. The third model was designed by combining the two chambers, that is, cut in halves the inlet volume of the above two models. Magnets were equipped above the float for perfect opening and closing gate. The functional experiment for three developed inlets was successfully carried out and the rating curves were derived.

  • PDF

슬래브-기둥 접합부의 내진성능을 위한 래티스 전단보강 (Lattice Shear Reinforcement for Earthquake-Resistance of Slab-Column Connection.)

  • 김유니;박홍근
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
    • /
    • pp.26-29
    • /
    • 2006
  • A flat plate-column connection is susceptible to brittle punching shear failure, which may result in the necessity of shear reinforcement. In present study, experimental tests were performed to study the capacity of slab-column connections strengthened with lattice, stud rail, shear band and stirrup under gravity and cyclic lateral load. Among them, the capacity of the specimens with lattice are superior to the others due to the truss action of the lattice bars and dowel action of the longitudinal bars as well as the shear resistance of the web re-bar. On the other hand, the strengths of the specimens with stud rail, shear band and stirrup are lower than the estimated strength by the ACI, therefore design formulas of the ACI are needed to revise.

  • PDF

인장웨브재 형태에 따른 각형강관 갭K형 접합부의 거동 비교 (Comparison on the Behavior according to Shapes of Tension Web member in gap K-joints in Cold-formed Square Hollow Sections)

  • 정상민;배규웅;문태섭
    • 한국강구조학회 논문집
    • /
    • 제17권5호통권78호
    • /
    • pp.561-568
    • /
    • 2005
  • 본 논문의 목적은 트러스 인장웨브재의 형상이 정방형 각형강관인 기존 연구(강관웨브형)와 고장력 강봉을 인장웨브재로 사용하기 위해 연결플레이트를 가지는(강봉웨브형) 냉간성형 각형강관 갭 K형 접합부의 거동 비교를 통하여 고장력 강봉 사용의 적정성을 알아보기 위한 것이다. 주관폭두께비가 33.3으로 동일한 강관웨브형 실험체 4개와 강봉웨브형 실험체 8개의 최대내력, 파괴모드, 초기강성, 연성율 등을 비교하였다. 비교 결과, 접합부의 내력은 강관웨브형에서는 압축지관의 선행파괴로 결정되었으며, 강봉웨브형에서는 인장측의 선행파괴로 결정되었다. 무차원화 내력은 동일 폭비에서 강관웨브형이 높게 나타났으며, 폭비 증가에 따른 내력증가현상도 강관웨브형에서 뚜렷하게 나타나고, 강봉웨브형은 일정한 경향이 나타나지 않은 반면에 인장과 압축폭비로 나누어 살펴보면 인장폭비 증가에 따라서는 선형적인 증가현상이 나타남을 알았다. 파괴모드는 강관웨브형의 경우에는 압축지관의 미소 국부좌굴과 인장웨브와 주관 접합면의 소성파괴가 나타났고, 강봉웨브형의 경우는 주관플랜지면 소성변형 후 연결플레이트 용접부위의 파단이 나타났다. 따라서, 강봉웨브형에서 연결 플레이트를 갖는 갭K형 접합부의 경우에는 강관웨브형에 비해 주관의 폭두께비를 낮게 할 필요가 있으며, 폭비도 인장지관과 압축지관과의 관계를 고려하여 결정하여야 할 것으로 판단된다.