• 정보처리학회논문지C
• /
• 제12C권1호
• /
• pp.111-120
• /
• 2005

이동 애드-혹 네트워크는 물리적 위치 이동이 가능한 노트들에 의해 자체적으로 형성되는 시스템으로 동적 위상을 고려한 라우팅 프로토콜을 필요로 한다 본 논문에서는 IETT의 라우팅 프로토콜 DSR을 확장한 R-DSR이라 불리는 온-디멘드 다중경로 프로토콜을 제안한다. 제안된 프로토콜에서는 DSR에 의해 구축되는 단인 경로 상의 2-홉 간격의 모든 노드들에 대해 별도의 노드론 경유하는 추가 경로가 연결된다. 수학적 분석을 통하여 DSR 관련 연구 중 가장 대표적인 방법 중의 하나인 Das의 다중경로 프로토콜보다 더 높은 메시지 전달 확률을 제공함을 보였다.

• Progress in Superconductivity
• /
• 제6권2호
• /
• pp.113-117
• /
• 2005

In this study, electromagnetic analysis of current paths including meander pattern, spiral pattern, and bi-spiral pattern were performed and in order to verity the analysis results, experiments tests including quench test, and insulation tests were performed. In addition, bubble corner concepts were introduced to enhance insulation reliability. From our study, bi-spiral pattern of YBCO thin films were rather effective for quench and insulation than the other patterns. So this current path pattern was adopted for YBCO thin films in order to develop 6.6 kV resistive fault current limiters. Finally YBCO thin films were connected in series and parallel to enhance capacity, and the test results of current limiting characteristics of 6.6kV resistive SFCL were successful. The Progress in Superconductivity is published every six month and serves as a channel for publications on superconductivity and related topics. The author(s) are required to submit THREE copies of the manuscripts along with original figures directly to the Editor.

• International Journal of Computer Science & Network Security
• /
• 제22권9호
• /
• pp.327-333
• /
• 2022

Wireless Sensor Networks (WSNs) plays an important role in our everyday life. WSN is distributed in all the places. Nowadays WSN devices are developing our world as smart and easy to access and user-friendly. The sensor is connected to all the resources based on the uses of devices and the environment [1]. In WSN, Quality of Service is based on time synchronization and scheduling. Scheduling is important in WSN. The schedule is based on time synchronization. Min-Max data size scheduling is used in this proposed work. It is used to reduce the Delay & Energy. In this proposed work, Two-hop neighboring node is used to reduce energy consumption. Data Scheduling is used to identify the shortest path and transmit the data based on weightage. The data size is identified by three size of measurement Min, Max and Medium. The data transmission is based on time, energy, delivery, etc., the data are sent through the first level shortest path, then the data size medium, the second level shortest path is used to send the data, then the data size is small, it should be sent through the third level shortest path.

• 한국정보통신학회논문지
• /
• 제22권11호
• /
• pp.1538-1543
• /
• 2018

원 상에 n개의 점들의 쌍 (a,b)이 존재할 때, 두 점 a와 b를 연결하는 직선 선분을 코드라고 한다. 이러한 n개의 코드들은 새로운 그래프 G를 정의한다. 각 코드는 G의 한 정점을 정의하고 두 코드가 교차하는 경우에 대응되는 정점들 간에 간선을 연결한다. 이렇게 만들어진 그래프 G를 원 그래프라고 부른다. 본 논문에서는 원 그래프에서 연결 요소를 찾는 문제를 다룬다. 연결 요소란 그래프 G의 부분 그래프 H로서 H안의 임의의 두 정점 간에 경로가 존재한다는 조건을 만족하는 최대 부분 그래프이다. 그래프 G가 인접 행렬로 주어지는 경우, 연결 요소를 찾는 문제는 깊이 우선 탐색 또는 너비 우선 탐색을 통해서 해결할 수 있다. 하지만 원 그래프의 경우에 코드들을 정의하는 n개의 점들의 쌍 정보만 입력으로 주어질 때, 인접 행렬을 구하는데 ${\Omega}(n^2)$ 시간이 소요됨을 알 수 있다. 본 논문에서는 인접 행렬을 만들지 않고 원 그래프의 연결 요소를 $O(n{\log}^2n)$시간에 찾는 알고리즘을 고안한다.

• 한국철도학회논문집
• /
• 제18권2호
• /
• pp.149-156
• /
• 2015

도시철도 승객의 수입금 정산 배분을 위하여 승객의 경로를 파악할 필요가 있다. 승객의 예상 이동경로를 파악을 위해 다양한 경로탐색기법들이 있지만, 링크기반 k-경로탐색기법이 많이 활용되고 있다. 그러나 기존의 k-경로탐색기법은 통행 및 도보시간, 환승 패널티 등의 변수에 따라 다양한 최적경로가 존재하는 문제점이 있고 특히, 급행열차를 선호하는 승객의 특성, 열차의 특성 등을 반영하지 못하는 한계를 지니고 있다. 본 연구에서는 이를 보완하기위하여 교통카드자료를 기반으로 실제로 이용한 하나의 경로를 탐색하는 방안을 제시하였다. 또한, 각 철도운영기관의 열차스케줄을 연계하여 최적경로를 탐색하는 방안도 제안하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2787-2794
• /
• 2011

A mesh node, a component of a mesh network, is connected with the network by dynamic routing using routing protocol and collects the information of adjacent or connected mesh nodes for its self-management and settings. Also, it relays packets between the mesh nodes and provides AP(Access Point) with its corresponding functions based on IEEE 802.11 a/b/g for clients' access to the network. In this paper, the study focused on the design and performance tests of Wireless Mesh Network(WMN) which is applied to the wireless communication network for the CBTC(Communications Based Train Control) system. The WMN was established on a K-AGT test-line (Kyeongsan city, Gyeongsangbuk-do), and to verify the applicability, its operation and performances are checked by measuring the data throughput, delay latency, quality measurements such as transmission loss, radio interference and path recovery and setup between the on-board and wayside.

• Journal of applied mathematics & informatics
• /
• 제32권1_2호
• /
• pp.255-266
• /
• 2014

For a connected graph G = (V,E) of order at least two, a set S of vertices of G is a monophonic set of G if each vertex v of G lies on an x - y monophonic path for some elements x and y in S. The minimum cardinality of a monophonic set of G is the monophonic number of G, denoted by m(G). Certain general properties satisfied by the monophonic sets are studied. Graphs G of order p with m(G) = 2 or p or p - 1 are characterized. For every pair a, b of positive integers with $2{\leq}a{\leq}b$, there is a connected graph G with m(G) = a and g(G) = b, where g(G) is the geodetic number of G. Also we study how the monophonic number of a graph is affected when pendant edges are added to the graph.

• 호남수학학술지
• /
• 제32권4호
• /
• pp.769-776
• /
• 2010

A pebbling move on a connected graph G is taking two pebbles off of one vertex and placing one of them on an adjacent vertex. For a connected graph G, $G^p$ (p > 1) is the graph obtained from G by adding the edges (u, v) to G whenever 2 $\leq$ dist(u, v) $\leq$ p in G. And the pebbling exponent of a graph G to be the least power of p such that the pebbling number of $G^p$ is equal to the number of vertices of G. We compute the pebbling number of fourth power of paths so that the pebbling exponents of some paths are calculated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.378-380
• /
• 2006

A high speed Analog parallel processing-based Viterbi decoder with a circularly connected 2D analog processing cell array is proposed. It has a 2D parallel processing structure in which an analog processing cell is placed at each node of trellis diagram is connected circulary so that infinitively expanding trellis diagram is realized with the fixed size of circuits. The proposed Viterbi decoder has advantages in that it is operated with better performance of error corrections, has a shorter latency and requires no path memories. In this parer, the performance of error correction as a reference position with the Analog parallel processing-based Viterbi decoder is testd via the software simulation

• 제어로봇시스템학회논문지
• /
• 제4권5호
• /
• pp.644-650
• /
• 1998

In this paper , a state space model for flexible beam is presented using the assumed-modes approach. The state space equation is derived for a flexible beam in which one end is connected to a motor and is driven by a torque equation and the other end is free. Many of the transfer function proposed thus far use the torque to the flexible beam as the input and the tip deflection of the flexible beam as the output. The Technique for the analysis and synthesis of the dual-input describing function(DIDF) is introduced here and the construction of a non-linear compensator, based on this technique, is proposed. This non-linear compensator, properly connected in the direct path of a closed-loop linear or non-linear control system. The above non-linear network is used to compensate linear and non-linear systems for instability, limit cycles, low speed of response and static accuracy. The effectiveness of the proposed scheme is demonstrated through computer simulation and experimental results.