• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.955-958
• /
• 2005

In this study, the wind load characteristics for a transmission tower is investigated considering the effect of the transmission lines through stochastic analysis. The assemblage of the transmission line and insulator are modeled as a double pendulum system connected to the SDOF model of the tower It is observed that the background component of the overturing moment induced by the wind response of the transmission line has considerable portion in the total overturning moment. Based on this result, a rotational viscoelastic damper (VED) is proposed for the mitigation of the transmission line reactions, which act as wind load transferred to the tower. To verify the effectiveness of the proposed strategy, time history analysis is conducted for different wind velocities and VED damping constants. From the analysis, the proposed VED is proved to be effective for mitigation of the background component rather than the resonance component of the transmission line reaction.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.124-126
• /
• 2008

Grid Connected inverter is produced current to deliver power to grid. To provide low THD current, LCL filters is effective to filter high frequency component of current output from inverter. To provide sinusoidal waveform, there are many researchers have been proposed several controllers for grid-connected inverter controllers. Synchronous Reference Frame (SRF)-based controller is the most popular methods. SRF-based controller is capable for reducing both of zero-steady state error and phase delay. But SRF based controller is contained cross-coupling components, which generate some difficulties to analyze. In this paper, SRF based controller is analyzed. By applying decoupling control, cross-coupling component is eliminated and single phase model of the system is obtained. Through this single phase model, gain controller is designed. To reduce steady state error, proportional gain is set as high as possible, but it may produce instability. To compromise between a minimum steady state error and stability, the single phase model is evaluate through Root Locus and Bode diagram. PSIM simulation is used to verify the analysis.

• 대한전자공학회논문지SP
• /
• 제39권4호
• /
• pp.361-369
• /
• 2002

제한된 구역내의 고정(static)된 감시 카메라를 통해 입력된 영상 데이터에 대해 움직임이 있는 물체를 검출하기 위해서는 주위 잡음(noise)에 대한 민감성(sensitivity)과 상황변화에 대해 대처할 수 있는 강인한 알고리즘이 요구된다. 본 논문에서는 이러한 잡음이나 갑작스런 상황의 변화에 적절히 대응하여 움직임 물체를 추출하고 추적하는 효율적인 알고리즘을 제안한다. 초기 배경 모델(background model) 영상에 의해서 입력되는 영상 내에 이동 물체가 존재할 경우 각 화소의 주변의 변화를 고려하여 움직임 영역을 검출하였다. 움직임 영역의 화소들의 잡음 제거를 위해 형태학적 필터(morphological filter)를 사용하였고, 8-연결 성분 표시(connected component labeling)에 의해 개별적인 물체의 움직임을 검출하였다. 마지막으로 다양한 환경과 모델에 따른 실험결과와 통계적인 분석을 제시하였다.

• 대한안전경영과학회지
• /
• 제20권3호
• /
• pp.21-26
• /
• 2018

This paper describes result of a study on safety against a fire of charging cable for mobile phone for vehicle. Combustion on the USB cable in the car was happened while driving. Gas coming from the burning USB cable could be a reason which can make a secondary car accident since the driver also can be embarrassed while driving. In order to prevent a secondary car accident connected on the road, to research a reason why USB cable can emit gas and be burned in charging. We did simulation test with abnormal fault condition for the electronic component on the board in the USB cable. So we get the result from abnormal fault condition simulation test, for instance, shorted test for output terminal of 8 pin switch, shorted test for chip resistor after thermal aging in the condition $25^{\circ}C$, 93 % RH during 48 hours. To analysis the result of all test, Combustion on the USB cable was not the 8 pin but other electrical component such as a chip resistor. Therefore we guess that the reason for USB cable combustion in charging in a car was not 8 pin and a LED but another defective component.

• 한국지진공학회논문집
• /
• 제25권6호
• /
• pp.267-274
• /
• 2021

Seismic fragility analysis of a structure is generally performed for the expected critical component of a structure. The seismic fragility analysis assumes that all the components behave independently in a structural system. A bridge system consists of many inter-connected components. Thus, for an accurate evaluation of the seismic fragility of a bridge, the seismic fragility analysis requires the composition of probabilities considering the correlation between structural components. This study presented a procedure to obtain the seismic fragility curve of a bridge system, considering the correlation between bridge components. Seismic fragility analysis was performed on a PSC bridge that is considered as the central infrastructure. The analysis results showed that the probability of the seismic fragility curve of the bridge system was higher than that of each bridge component.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.57-62
• /
• 2005

Grid-connected photovoltaic (PV) systems were installed and monitored at the field demonstration test center (FDTC) in Korea in October 2002. Before long-term field testing of installed PV systems, the performances of PV components were evaluated and compared through short-term performance tests of each of the PV system components such as power conditioning system and PV module under standard test conditions. A data acquisition system has been constructed for measuring and analyzing the performance of PV systems to observe the overall effect of environmental conditions on their operation characteristics. Performances of PV systems have been evaluated and analyzed not only for component perspective (PV array, power conditioning unit) but also for global perspective (system efficiency, capacity factor, electrical power energy) by review of the field test and loss factors of the systems. These results indicate that it is highly imperative to develop an optimum design technology of grid connected PV systems. The objective of this paper is not only to evaluate and analyze the performance of domestic PV systems application through long-term field testing at FDTC but also to develop evaluation, analysis and optimum technology for long-term stability and reliability of grid-connected PV systems in Korea.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.1013-1021
• /
• 2005

In this paper, we developed an automatic design optimization system for parametric shape optimization of cooling passages inside axial turbine blades. A parallel three-dimensional thermoelasticity finite element analysis code from an open source system was used to perform automatic thermal and stress analysis of different blade configuration. The developed code was connected to an evolutionary optimizer and built in a design optimization system. Using the optimization system, 279 feasible and optimal solutions were searched. It is provided not only one best solution of the searched solutions, but also information of variation structure and correlation of the 279 solutions in function, variable, and real design spaces. To explore design information, it is proposed a new interpretation approach based on evolutionary clustering and principal component analysis. The interpretation approach might be applicable to the increasing demands in the general area of design optimization.

• 디지털산업정보학회논문지
• /
• 제8권3호
• /
• pp.11-22
• /
• 2012

GIS have expanded the use-range to the various application area with the advantage of interface environment, the various geographical operation. topological analysis by the friendly user. Early GIS software was developed as monolithic tool in which all functions packed in the same software. But, these GIS software have the problems of the high cost of constructing system, closely related system architecture and the reusability. And there is a lack of interoperability between them because most of them have their own unique data format according to their practical application fields. So Component is a unit that it is cohesive software package which is able to be developed and arranged independently and connected with another component for necessary system composition. In this paper, we analyze the requirements for component design and component specifications based on the extracted components. Commonly used to extract components from the requirements of the GPS component-based development process is presented. These components extracted by the process can be used to assemble components only. In particular, applications for developers to add features specific case without affecting the other components that can be modify the component.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.52-57
• /
• 2012

액체로켓은 연소기, 가스발생기, 터보펌프, 터빈 등으로 구성된 시스템이며, 각 요소들을 연결해주는 공급계 부품들로 구성되어 있다. 각 부품들이 액체로켓 성능에 복합적인 영향을 미치기 때문에 개념설계 전 시스템의 전체적인 예비해석이 반드시 필요하다. 액체로켓 엔진 시스템의 각 구성품 모듈을 고려한 통합 해석 프로그램의 개발은 이루어지지 않았다. 본 논문에서는 액체로켓 공급계 부품의 모델구성 및 검증을 거친 후 가스발생기 사이클 구성하였으며, 대표적인 가스발생기 사이클인 F-1 엔진의 결과와 비교하였다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제7권3호
• /
• pp.1-7
• /
• 2001

본 논문에서는 canal 곡면의 투시 윤곽곡선 (perspective silhouette)에 대한 매개변수화 (parametrization) 방법과 윤곽곡선을 이루는 모든 연결된 구성요소 (connected component)를 발견하는 효율적이고 안정성 있는 알고리즘을 제시한다. Canal 곡면은 반경이 변화하면서 이동하는 구 (moving sphere)의 외곽곡면 (envelope surface)이며, 구의 중심점의 궤적을 나타내는 곡선 C(t)와 구의 반경 함수 r(t)에 의해 정의된다. 이동 구는 canal 곡면과 원에서 교차한다. Canal 곡면을 원의 집합으로 분할함으로써, 각각의 원 위에서 주어진 관측점에 대한 투시적 윤곽곡선을 구성하는 점을 계산하여 매개변수화하는 방법을 제시한다. 고정된 중심점 $C(t_*)$와 반경 $r(t_*)$를 갖는 이동 구는 canal 곡면과 하나의 원 $K(t_*)$에서 교차한다. 또한 이동 구를 관측점에서 볼 때의 윤곽곡선도 다른 하나의 원 $Q(t_*)$을 구성한다. 두 원 $K(t_*)$와 $Q(t_*)$가 한 점에서 접하게 되는 t의 값을 구함으로써 canal 곡면에 대한 윤곽곡선을 이루는 모든 연결된 구성요소를 발견하는 효율적인 방법을 제시한다.