• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.588-591
• /
• 2004

Polyazomethine type conjugated copolymers containing phenanthridine units, poly(PZ-PTI), were synthesized by Schiff-base reaction. This new conjugated copolymer exhibited improved solubility in common organic solvents due to the presence of alkyl side chains as well as phenanthridine groups. Double layer (ITO/poly(PZ-PTI)/$Alq_3$/Mg) light emitting diode (LED) exhibited enhanced EL emission and efficiency compared to that of single layer (ITO/poly(PZ-PTI)/Mg) LED. With increasing the thickness of $Alq_3$ layer in double layer (ITO/poly(PZ-PTI)/$Alq_3$/Mg) LED the emission peak gradually shifted to the single layer (ITO/$Alq_3$/Mg) LED, confirming good hole transporting behaviour of the synthesized conjugated copolymer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.394-394
• /
• 2009

Water solubility of conjugated polymers may offer many applications. Potential applications of water-soluble conjugated polymers include the polymer light-emitting diode and new materials for nano and micro hollow-capsules, and bio- or chemo-sensors. We synthesized neutral polyfluorenes containing bromo-alkyl groups by the palladium catalyzed Suzuki coupling reaction. Bromo-alkyl side groups in neutral polyfluorenes were quaternized by tri-methyl amine solution. The electrochemical and optical properties of water-soluble conjugated polymers are discussed. This novel synthesized water-soluble conjugated polymers were used as a interfacial dipole layer between active layer and metal cathode in polymer solar cell for enhancement of open-circuit voltage (Voc), which is one of the most critical factors in determining device characteristics. We also investigated the device performance of polymer solar cell with different metal cathode such as Al, Ag, Au and Cu. In polymer solar cell, novel cationic water-soluble conjugated polymers were inserted between active layer and high-work function cathode (Al, Ag, Au and Cu).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.599-601
• /
• 2004

A new blue electroluminescent conjugated polymer, poly(BP-alt-BCV), was prepared by Hornor-Emmons polycondensation and used as a host polymer for the phosphorescent dopant, $(bsn)_2Ir(acac)$. Poly(N-vinylcarbazole) (PVK), known as a blue EL material, was also used for comparison with poly(BP-alt-BCV). Electrophosphorescence of PLEDs with these dopant/host systems was investigated in terms of luminescence, efficiency, emission color, and energy transfer.

• Macromolecular Research
• /
• v.13 no.5
• /
• pp.460-462
• /
• 2005

• Macromolecular Research
• /
• v.15 no.1
• /
• pp.90-92
• /
• 2007

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.27.2-27.2
• /
• 2011

Polymer electronics is the one of the most promising way to realize the flexible electronics and many studies made remarkable progress to achieve the improvement in performance of polymer electronics comparable to current silicon-based technology. PBTTT is conjugated semiconducting polymer with highly ordered, chain-extended crystalline microstructures and shows high field effect mobilities above 0.1 $cm^2/Vs$. We studied PBTTTs FETs phase and explored methods to control channel interface in various device structures. Especially, in PBTTTs' unique nano-ribbon phase, we could obtain high mobilities of up to 0.4 $cm^2/Vs$, which was not reached before. Alignment of PBTTTs film was carried out using zone casting and anisotropy of mobilities in parallel and perpendicular to the polymer chain direction was investigated. Optical anisotropy in aligned nano-ribbon PBTTT FETs was also studied using a polarized optical absorption.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.894-900
• /
• 2009

This study examined the charge carrier photogeneration and hole transport properties of blends of poly (9-vinylcarbazole) (PVK), $\pi$-conjugated polymer, with different weight proportions (0~29.4 wt%) of (PEA)$VOPO_4{\cdot}H_2O$ (PEA: phenethylammonium cation), a novel organic-inorganic hybrid material, using IR, UV-Vis, and energy dispersive spectroscopy (EDS), thermogravimetric analysis (TGA), steady state photocurrent (SSPC) measurement, and atomic force microscopy (AFM). The SSPC measurements showed that the photocurrent of PVK was reduced by approximately three orders of magnitude by the incorporation of a small amount (~12.5 wt%) of (PEA) $VOPO_4{\cdot}H_2O$, suggesting that hole transport occurred through the PVK carbazole groups, whereas a reverse trend was observed at high proportions (>12.5 wt%) of (PEA)$VOPO_4{\cdot}H_2O$, suggesting that transport occurred via (PEA)$VOPO_4{\cdot}H_2O$ molecules. The transition to a trap-controlled hopping mechanism was explained by the difference in ionization potential and electron affinity of the two compounds as well as the formation of charge percolation threshold pathways.

• Polymer Science and Technology
• /
• v.21 no.3
• /
• pp.251-257
• /
• 2010

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.486-492
• /
• 2005

Into a no-conjugated polymer chain we have introduced side chains with a styrene-linked triphenylamine segment as a $\pi-electron$ donor, styrene-]inked aminobenzaldehyde segment as a tunable reactive -CHO group, and PM (4-(dicyanomethylene)-2-(tert-butyl)-4H-pyran) moiety as a $\pi-electron$ acceptor for red emitting materials. The thermal stability and the optical properties of the statistical copolymers have been studied. All the polymers were electrochemically active and showed electroluminescent emission at around 700nm. The EL device of P5-PM based on the sturcture of $ITO/PPV/polymer/BCP/Alq_3/Al$ showed a maximum brightness of $120cd/m^2\;at\;50mA/cm^2$ with an external quantum efficiency of $0.67\%$. It was possible to enhance the external quantum efficiency by balancing the charge recombination. A red-emitting polymer with high external quantum efficiency was developed by incorporating bifunctionality.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.240-240
• /
• 2007