• 설비공학논문집
• /
• 제10권5호
• /
• pp.523-534
• /
• 1998

The convection heat transfer on horizontal circular tube is studied as a conjugated heat transfer problem. With uniform heat generation in a cylindrical heater placed in a cross flow boundary condition, heat flow that is conducted along the wall of the heater creates a non-isothermal surface temperature and non-uniform heat flux distribution. In the present investigation, the effects of circumferential wall heat conduction on convection heat transfer are investigated for the case of forced convection around horizontal circular tube in cross flow of air and water. Non-dimensional conjugation parameter $ K^*$ which can be deduced from the governing energy differential equation should be used to express the effect of circumferential wall heat conduction. Two-dimensional temperature distribution$ T({\gamma,\theta})$ is presented. The influence of circumferential wall heat conduction is demonstrated on graph of local Nusselt number.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.471-476
• /
• 2001

The characteristics of conjugated heat transfer in the inclined channel was experimentally investigated. The simulated module is attached to the bottom of the inclined channel and is heated with constant heat flux. The experimental parameters of this study are input power (Q = 3, 7W), inlet air velocity ($V_{i}=0.1{\sim}0.9m/s$) and inclined channel angle (${\varphi}=0{\sim}90^{\circ}$). The results show that input power was most effective parameter on the temperature differences between module and air. As the inclined channel angle increases, the temperatures of the module are increased. And we obtained the best condition on the conductive board when ${\varphi}=0^{\circ}$.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.973-976
• /
• 2011

본 논문에서는 연소기 엔진 연소시험 설비용으로 사용되는 비연소식 전기히터의 특정부위에서 코일이 파단되는 현상이 연속적으로 발생함에 따라 원인 규명을 목적으로 히터에 대한 복합 열유동해석을 수행하었다. 수행 결과, 히터의 파단이 발생하는 코일 입구 직선구간에서 코일의 온도가 국부적으로 크게 상승함에 따라 열 및 구조적으로 취약하다는 것이 판명되었으며, 이의 원인은 이 영역 부근에서 공기 유속이 매우 낮았기 때문이었다. 코일을 하류로 25mm 이동하였고 이를 통해서 코일 입구 직선부분에서의 공기의 유속이 증가됨으로 코일온도를 감소시킬 수 있었고, 코일의 열 및 구조적 안정성을 확보할 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.231-234
• /
• 2010

고온의 연소가스에 노출되는 디퓨저 냉각에 필요한 열량을 계산하였다. 디퓨저 내부는 공기와 혼합된 연소가스가 흐르고 디퓨저 벽체는 채널로 구성된 공간에 물이 흐르도록 되어 있다. 디퓨저 구조물과 유체 간에 또는 유체 자체적인 열전달과 구조물 내부의 열전달 현상은 복합적인 형태로 나타나는데 고온에서 작동하는 점을 고려하여 복사, 대류, 전도 모두를 적용 하였다. 열전달량 계산은 경험식에 근거한 1차원 해석과 CFD 해석의 2가지 방법으로 수행하였다. 1차원 해석은 경험식을 통해 얻어진 결과를 적용하여 열전달량을 산출하였고, CFD 해석은 DO 복사 열전달 모델을 적용하여 계산하였으며, 계산의 타당성을 검정하기 위하여 두 방법을 비교하였다. 총 열전달량의 차이는 1% 미만으로 거의 같았으나, 1차원 계산은 열전달 모델의 단순화로 디퓨저 입구에서의 순환영역을 구현하지 못하여 전체적인 열전달량 분포에서는 차이를 보였다. 디퓨저의 안정성을 확보하기 위한 냉각수 용량은 2가지 계산 결과를 조합하여 각 구간별로 최대 열전달량을 근거로 도출하였다.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.741-751
• /
• 1996

The coupled conduction and convection heat transfer from the protruding heat source in a vertical channel is numerically investigated. Conjugate solution of the two-dimensional energy equation is obtained for the incompressible air flow over the rectangular block with local heat source. It was found that several recirculation zones and separation bubble near the block were related to Re and Gr. And the results show that fractions of the heat transfer through each of the block face, maximum temperature of the block and the relative effect of each parameter on the maximum temperature and heat transfer.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.121-125
• /
• 2008

In this study, the characteristics of internal flow and the heat transfer performance of dimpled plate heat exchanger were numerically investigated. For the numerical analysis, conjugate heat transfer method between cold fluid - plate - hot fluid was studied with appropriate boundary conditions. Velocity magnitude, temperature and pressure distribution were obtained from the simulation. Correlations for fanning f-factor and Colburn j-factor were obtained from numerical results and compared to the experimented data.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.453-462
• /
• 1990

The interaction of forced convection-conduction with thermal radiation in laminar boundary layer over a plate fin is studied numerically. The analysis is based on complete solution whereby the heat conduction equation for the fin is solved simultaneously with the conservation equations for mass, momentum and energy in the fluid boundary layer adjacent to the fin. The fluid is a gray medium and diffusion(Rosseland) approximation is used to describe the radiative heat flux in the energy equation. The resulting boundary value problem are convection-conduction parameter N$_{c}$ and radiation-conduction parameter m, Prandtl number Pr. Numerical results are presented for gases with the Prandtl numbers of 0.7 & 5 with values of N$_{c}$ and M ranging from 0 to 10 respectively. The object of this study is to provide the first results on forced convection-radiation interaction in boundary layer flow over a semi-infinite flay plate which can be used for comparisons with future studies that will consider a more accurate expression for the radiative heat flux. The agreement of the results from the complete solution presented by E. M. Sparrow and those from this paper for the special case of M=0 is good. The overall rate of heat transfer from the fin considering radiative effect is higher than that from the fin neglecting radiative effect. The local heat transfer coefficient with radiative effect is higher than that without radiative effect. In the direction from tip to base, those coefficients decrease at first, attain minimum, and then increase. The larger values of N$_{c}$ M, Pr give rise to larger fin temperature variations and the fin temperature without radiative effect is always higher than that with radiative effect.

• 반도체디스플레이기술학회지
• /
• 제13권2호
• /
• pp.57-62
• /
• 2014

In the study, a numerical analysis is conducted to investigate the heat transfer characteristics of an inverter system inside a panel for three locations (bottom, middle and top). A conjugate heat transfer is simulated using a CFD (computational fluid dynamics) code since the heat transfer through the surrounding panel walls is important. It is shown that the heat flux through the left wall, which is important for the safety of the electronic equipment, is the biggest when the inverter is located at bottom. On the other hand, the heat flux through the left wall is negligible when the inverter at middle or top. It is also found that the heat flux to the surrounding walls is the lowest when the inverter is at middle.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1609-1620
• /
• 1993

본 연구에서는 자연형 태양열시스템의 열성능에 영향을 미치는 인자를 열유동 전산해석을 통해 규명하고 모델을 설정하여 활용률을 최대로 하는 형상을 제시하고자 한다.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.98-109
• /
• 2016

The flow and heat transfer characteristics of a heat exchanger having rectangular pin-fin in the flow direction have been investigated numerically. On the bottom plate, the convective boundary conditions for the hot side was given, and the fins were arranged in a channel-type geometric model using the periodic boundary condition in the span-wise direction. Three-dimensional numerical calculations for the flow and conjugate heat transfer problem were conducted using SIMPLE algorithm and $k-{\varepsilon}$ turbulence model. For the slanted pin-fin models, it was found that the downward cooling flow is generated due to the downward pressure gradient component, which can enhance the heat transfer performance near the bottom surface and the fin stem region. Four different inclined angles were considered in the Reynolds number range of 13,500-55,000. The aero-thermal performance of the slanted pin-fin heat exchangers, such as the volume and area goodness factors, were summarized and compared with the baseline plate-fin type heat exchanger quantitatively.