• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.430-439
• /
• 2008

In this paper, we propose a sender-based TCP congestion control scheme for downward vertical handover (DVHO), in which mobile node moves from a cellular network to a wireless LAN. DVHO can give rise to severe performance problems in TCP throughput because it causes a drastic change of link characteristics. Particularly, TCP executes falsely congestion control by packet reordering, which is occurred from link delay difference between a cellular link and a wireless LAN link. Therefore, the congestion window is reduced. And unnecessary retransmissions wastes bandwidth. To solve these problems, we propose a method using estimated round-trip time in cellular link to process duplicated ACKs from reordering. Furthermore, the duplicated ACKs are used to the control congestion window size. Simulation result shows that the proposed scheme can solve problems. Moreover, the proposed scheme can have better performance than TCP New Reno and nodupack.

• The KIPS Transactions:PartC
• /
• v.13C no.3 s.106
• /
• pp.353-358
• /
• 2006

Unlike TCP Reno, TCP Vegas recognizes network congestion through the measuring of RTT (Round Trip Time) and decides the main congestion control parameters, such as Windows size. But, congestion avoidance scheme of Vegas poorly reflects asymmetric characteristics of packet path because TCP Vegas uses the measuring of RTT that reflects forward/backward packet transmission delay as a forward delay. The RTT can't infer the forward/backward transmission delay variation because it only measures the packet's turn around time. In this paper, We have designed and implemented a new Vegas congestion control algorithm that can distinguish forward/backward network congestion. We have modified the source codes of TCP Vegas in Linux 2.6 kernel and verified their performance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.153-160
• /
• 2017

It may be reasonable to consider density per unit area over time rather than analyze traffic volume, which is simply the traffic volume per unit of time, in assessing the maritime traffic congestion of a certain area. This study contributes to the standardization of maritime traffic congestion assessment methods for the maritime traffic safety diagnosis institute while seeking a new method to minimize evaluation error due to converted traffic volume per ship tonnage level. To solve this problem, a method to evaluate maritime traffic congestion by comparing the area occupied by a vessel with the area of its route using vessel identification data from the Automatic Identification System (AIS) has been proposed. In this new model, it is possible to use actual data due to the development of information and communication technology, reducing conversion error while allowing for the evaluation of maritime traffic congestion by route.

• The KIPS Transactions:PartC
• /
• v.9C no.2
• /
• pp.197-212
• /
• 2002

Transmission Control Protocol (TCP) [1] has been tuned as a reliable transfer protocol for traditional networks comprising wired links and stationary hosts with same link characteristics. TCP assumes that congestion in the network be a primary cause for packet losses and unusual delays. TCP performs welt over such networks adapting to end-to-end delays and congestion losses, by standard congestion control mechanisms, such as slow-start, congestion avoidance, fast retransmit and recovery. However, networks with wireless and other lossy links suffer from significant losses due to bit errors and handoffs. An asymmetry network such as ADSL has different bandwidth for both directions. As a result, TCP's standard mechanisms incur end-to-end performance degradation in various links. In this paper, we analyze the TCP problems in wireless, satellite, and asymmetry links, and measure the new TCP mechanisms that are recommended by IETF Performance Implications of Link Characteristics (PILC) WG[2], by using Network Simulator 2 (NS-2).

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.25-36
• /
• 2009

Everyday congestion length (distance) and duration (time) data are collected and recorded in Expressway Traffic Information Center. These records are based on the information that the operators watch CCTV and decide traffic condition in order to present information about congestion on VMS. Using VMS message has some merits like that it doesn't need a great lot of cost to construct hardware such like FTMS because operators can check traffic condition by watching CCTV only. Of cause in the aspect of accuracy, using VMS message has the limitation that it is based on subject decision compared with FTMS. However, it can be said that the value of using VMS message is very large. The object of this study is to use the VMS information record (log file) usefully to provide information of traffic condition on expressway for users (drivers) without keeping the VMS information record in dead storage. To do so, in this research, congestion calculation method able to understand traffic congestion condition on expressway was developed.

• Journal of Korean Society of Transportation
• /
• v.33 no.6
• /
• pp.520-530
• /
• 2015

This paper formulates the methodologies to estimate optimal congestion tolls from long-run and short-run perspectives and applies them to the highways of Seoul. An optimal long-run congestion toll is estimated with an optimal volume-capacity-ratio to minimize the total costs which consist of two components: road construction and maintenance costs and traveler costs. By contrast, an optimal short-run congestion toll is estimated with a supply-demand equilibrium which is determined by using a speed-flow function and a disaggregate modal choice model. The results of a long-run analysis for the Seobu urban expressway suggest the optimal volume-capacity-ratio of 1.35 and the optimal congestion toll of 503 Won per automobile kilometer. By contrast, those of a short-run analysis for the Mia-ro urban arterial suggest 1.31 and 420 Won, respectively. Although our results are to some degree dependent on the interest rate and time value assumed, one basic conclusion holds up: the congestions toll tested could generate substantial gains in social welfare if applied to Seoul.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1384-1390
• /
• 2008

The TCP protocol is originally designed for wired network, however it performs very poor in wireless network due to different nature of wireless network from wired networks. In terms of TCP performance improvement in wireless Ad-hoc network, many researches show that small congestion window size of TCP connection can improve TCP performance. We propose a new TCP algorithm to improve TCP performance in wireless Ad-hoc network. The basic idea of our approach is that TCP receiver estimates the optimum window size and then sets congestion window limit of TCP sender to an optimum value by using the advertised window field in TCP ACK packet. From extensive computer simulation, the proposed algorithm shows superior performance than traditional TCP protocols in terms of packet delivery ratio and packet loss.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.923-929
• /
• 2021

TCP communication and packet communication require transmission control technology to ensure high quality and high reliability. However, in the case of real-time data transmission, an inefficient transmission problem occurs. In order to overcome this problem and transmit the packet reliability, in general, early congestion control using the buffer level as an index was used. Control of the congestion control point and the cancellation point is delayed because the point at which congestion is controlled is based on the buffer level. Therefore, in this paper, not only the buffer level indicator, but also the ideal buffer level, which determines the packet discard probability, is classified so that the transmission rate and buffer level that measure network congestion are close to the level above the optimal setting. As a result, it was shown that the average buffer level can be directly controlled by maintaining the average buffer level by the ideal buffer level set in the experiment to prove the proposed method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.321-327
• /
• 2023

With the development of artificial intelligence, the prediction system has become one of the essential technologies in our lives. Despite the growth of these technologies, traffic congestion at intersections in the 21st century has continued to be a problem. This paper proposes a system that predicts intersection traffic jams using a Convolutional LSTM (Conv-LSTM) algorithm. The proposed system models data obtained by learning traffic information by time zone at the intersection where traffic congestion occurs. Traffic congestion is predicted with traffic volume data recorded over time. Based on the predicted result, the intersection traffic signal is controlled and maintained at a constant traffic volume. Road congestion data was defined using VDS sensors, and each intersection was configured with a Conv-LSTM algorithm-based network system to facilitate traffic.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.147-156
• /
• 2011

Since the urbanization process has been taking place, negative outcomes such as environmental pollution and traffic congestion have produced as well. Reflecting the phenomenon, our study assumed that physical structure of urban form were implicit in relation to both economic performance and cost. It can be interpreted that as the urban space has been growing bigger, economic performances such as regional product output, economy of scale and the effect of agglomeration economies are increased. On the contrary, the negative effects such as environmental pollution and traffic congestion were incurred as economic loss and expenses. It means that even though economic performance can help increase regional product output, we should consider the loss on economic expenses which are paid for social problems such as environmental pollution and traffic congestion, which are caused by urbanization. Therefore, this study aims to statistically validate the relationship between traffic congestion as the most representative economy costs and physical characteristics of urban in a large city such as Seoul and to suggest its implications. As a result of model development for empirical analysis, GRDP(0.604), the population(0.582), employment GINI coefficients(0.296), population GINI coefficients(0.254) in order led to congestion cost. We can come to the conclusion that in case of scale factor such as the population, if the population tends to concentrate, urban becomes more crowded and that if GINI coefficients (the population, employment) which are variable on inequality according to region have the disparity with surrounding areas, congestion cost is caused a lot on account of movement related with employment. In addition, this phenomenon was caused if both the population and employment were geographically biased on one side.