• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.401-401
• /
• 2016

Although vertically aligned one-dimensional (1D) structure has been considered as efficient forms for photoelectrode, development of efficient 1D nanostructured photocathode are still required. In this sense, we recently demonstrated a simple fabrication route for CuInS2 (CIS) nanorod arrays from aqueous solution by template-assisted growth-and-transfer method and their feasibility as a photoelectrode for water splitting. In this study, we further evaluated the photoelectrochemical properties surface-modified CIS nanorod arrays. Surface modification with CdS and ZnS was performed by successive ion layer adsorption and reaction (SILAR) method, which is well known as suitable technique for conformal coating throughout nanoporous structure. With surface modification of CdS and ZnS, both photoelectrochemical performance and stability of CuInS2 nanorod arrays were improved by shifting of the flat-band potential, which was analyzed both onset potential and Mott-schottky plot.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.394-394
• /
• 2016

The oxygen reduction reaction (ORR) in a polymer electrolyte membrane (PEM) fuel cell requires the use of Pt-based catalysts. Due to the high cost and low abundance of Pt, many researchers have been studied to reduce the use of Pt while to enhance the catalytic performance of Pt. One of the promising strategies is the deposition of Pt as ultrathin skins of only a few atomic layers on nanoscale substrates made of another metal. This presentation will discuss the conformal deposition of Pt as uniform, ultrathin shells on Pd nanocrystals. By optimizing the catalytic behavior of Pt-based nanocrystals, we obtained the greatly enhanced ORR activity and durability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.44-47
• /
• 2004

Fabrication of barrier layer on PES substrate and plastic OLED device by atomic layer deposition are carried out. Simultaneous deposition of 30nm of $AlO_x$ film on both sides of PES gives film MOCON value of 0.0615g/$m^2$.day (@38$^{\circ}C$, 100% R.H). Introduction of conformal $AlO_x$ film by ALD resulted in enhanced barrier properties for inorganic double layered film including PECVO $SiN_x$. Preliminary life time to 91% of initial luminance (1300 cd/$m^2$ ) for 100nm of PECVD $SiN_x$/30nm of ALD $AlO_x$ coated plastic OLED device was 260 hours.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.680-683
• /
• 1998

In case of the infinite body containing a rigid inclusion with line crack shape, stress intensity factor is determined and the relation between stress intensity factor and stress distribution near a crack tip is developed. Also, the relation between stress intensity factor and Kolosoff stress function is developed. Finally, these results are compared with those that the crack surface is under no traction.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.195-198
• /
• 2002

Two types of conformal load-bearing antenna structure (CLAS) were designed with microwave composite laminates and Nomex honeycomb cores, to give both structural rigidity and good electrical performance. One is 4$\times$8 array for Synthetic Aperture Radar(SAR) system and the other is $5\times2$ array for wireless LAN system. Design was based on wide bandwidth, high polarization purity, low loss and good structural rigidity. We studied the design, fabrication and structural/electrical performances of the antenna structures. The flexural behavior was observed under a 3-point bending test, an impact test, and a buckling test. Electrical measurements were in good agreement with simulation results and these complex antenna structures have good flexural characteristics. The design of this antenna structure is extended to give a useful guide for sandwich panel manufacturers as well as antenna designers.

• Progress in Medical Physics
• /
• v.5 no.2
• /
• pp.45-48
• /
• 1994

We have studied about leaf-width distribution of Multileaf Collimator(MLC). We have analyzed 1169 treatment fields from 303 patients who have treated by radiation therapy. From this analysis, we can design an unevenly leaf-width distributed MLC, by placing the smaller leaf widths for more frequent blocking region and the larger for less. The average width of total leaves is 0.8 cm, but the effective block width is 0.5-0.6 cm for frequently blocking region(3-6 cm from the field center).

• Progress in Medical Physics
• /
• v.8 no.1
• /
• pp.31-35
• /
• 1997

Purpose: To analyse the geometrical limitations in non-coplanar treatment for applying this result to treatment planning. Material and Method: The ranges of gantry movement were mesured for the treatment sites with or without EPID and various couch angle. Resultas and conclusitn : The gantry range of motions for various situations were quantitized for applying these results to treatment planning.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.73-78
• /
• 2004

In this research, the photoelastic experimental hybrid method with Hook-Jeeves numerical method has been developed: This method is more precise and stable than the photoelastic experimental hybrid method with Newton-Rapson numerical method with Gaussian elimination method. Using the photoelastic experimental hybrid method with Hook-Jeeves numerical method, we can separate stress components from isochromatics only and stress intensity factors and stress concentration factors can be determined. The photoelastic experimental hybrid method with Hook-Jeeves had better be used in the full field experiment than the photoelastic experimental hybrid method with Newton-Rapson with Gaussian elimination method.

• The Pure and Applied Mathematics
• /
• v.13 no.2 s.32
• /
• pp.151-155
• /
• 2006

Let $\gamma$ be a $C_2$ curve in the open unit disk $\mathbb{D}. Flinn and Osgood proved that $K_{\mathbb{D}}(z,\gamma){\geq}1$ for all $z{\in}{\gamma}$ if and only if the curve ${\Large f}o{\gamma}$ is convex for every convex conformal mapping $\Large f$ of $\mathbb{D}, where $K_{\mathbb{D}}(z,\;\gamma)$ denotes the hyperbolic curvature of $\gamma$ at the point z. In this paper we establish a generalization of the Flinn-Osgood characterization for a curve with the hyperbolic curvature at least 1.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.408-415
• /
• 1998

The analysis model is the power law creep material containing an elliptical rigid inclusion subjected to the arbitrarily directional stress on infinite boudary. The stress analysis is performed using the conformal mapping function and complex pseudo-stress function. The stress distributions near an elliptical rigid inclusion are obtained with various ellipse shapes, strain hardening exponents and directions of applied stress.