• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.401-401
• /
• 2016

Although vertically aligned one-dimensional (1D) structure has been considered as efficient forms for photoelectrode, development of efficient 1D nanostructured photocathode are still required. In this sense, we recently demonstrated a simple fabrication route for CuInS2 (CIS) nanorod arrays from aqueous solution by template-assisted growth-and-transfer method and their feasibility as a photoelectrode for water splitting. In this study, we further evaluated the photoelectrochemical properties surface-modified CIS nanorod arrays. Surface modification with CdS and ZnS was performed by successive ion layer adsorption and reaction (SILAR) method, which is well known as suitable technique for conformal coating throughout nanoporous structure. With surface modification of CdS and ZnS, both photoelectrochemical performance and stability of CuInS2 nanorod arrays were improved by shifting of the flat-band potential, which was analyzed both onset potential and Mott-schottky plot.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.394-394
• /
• 2016

The oxygen reduction reaction (ORR) in a polymer electrolyte membrane (PEM) fuel cell requires the use of Pt-based catalysts. Due to the high cost and low abundance of Pt, many researchers have been studied to reduce the use of Pt while to enhance the catalytic performance of Pt. One of the promising strategies is the deposition of Pt as ultrathin skins of only a few atomic layers on nanoscale substrates made of another metal. This presentation will discuss the conformal deposition of Pt as uniform, ultrathin shells on Pd nanocrystals. By optimizing the catalytic behavior of Pt-based nanocrystals, we obtained the greatly enhanced ORR activity and durability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.44-47
• /
• 2004

Fabrication of barrier layer on PES substrate and plastic OLED device by atomic layer deposition are carried out. Simultaneous deposition of 30nm of $AlO_x$ film on both sides of PES gives film MOCON value of 0.0615g/$m^2$.day (@38$^{\circ}C$, 100% R.H). Introduction of conformal $AlO_x$ film by ALD resulted in enhanced barrier properties for inorganic double layered film including PECVO $SiN_x$. Preliminary life time to 91% of initial luminance (1300 cd/$m^2$ ) for 100nm of PECVD $SiN_x$/30nm of ALD $AlO_x$ coated plastic OLED device was 260 hours.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.680-683
• /
• 1998

In case of the infinite body containing a rigid inclusion with line crack shape, stress intensity factor is determined and the relation between stress intensity factor and stress distribution near a crack tip is developed. Also, the relation between stress intensity factor and Kolosoff stress function is developed. Finally, these results are compared with those that the crack surface is under no traction.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.195-198
• /
• 2002

Two types of conformal load-bearing antenna structure (CLAS) were designed with microwave composite laminates and Nomex honeycomb cores, to give both structural rigidity and good electrical performance. One is 4$\times$8 array for Synthetic Aperture Radar(SAR) system and the other is $5\times2$ array for wireless LAN system. Design was based on wide bandwidth, high polarization purity, low loss and good structural rigidity. We studied the design, fabrication and structural/electrical performances of the antenna structures. The flexural behavior was observed under a 3-point bending test, an impact test, and a buckling test. Electrical measurements were in good agreement with simulation results and these complex antenna structures have good flexural characteristics. The design of this antenna structure is extended to give a useful guide for sandwich panel manufacturers as well as antenna designers.

• 한국의학물리학회지:의학물리
• /
• 제5권2호
• /
• pp.45-48
• /
• 1994

방사선 치료분야에서 Conformal Therapy에 이용되는 Multileaf Collimator(MLC) leaf 폭 분포에 관한 연구를 하였다. 이미 방사선 치료를 받은 303명 환자의 1169 치료 조사면 차폐 블럭 사용빈도 유형을 조사하여 block 사용빈도가 잦은 곳은 leaf 폭을 좁게 배치하고, 사용빈도가 성긴 곳은 leaf 폭을 두껍게 배치하였다. 전체 leaf 폭 평균은 0.8 cm이되, 실제 차폐 블럭 사용빈도가 높은 부위(치료중심에서 3-6 cm)에서는 MLC leaf 폭이 0.5-0.6 cm의 치료 효과를 볼 수 있도록 불균일 leaf 폭 분포를 갖는 MLC를 고안하였다.

• 한국의학물리학회지:의학물리
• /
• 제8권1호
• /
• pp.31-35
• /
• 1997

목적 : 비동일 평면 치료기술의 기하학적인 제약 요소를 평가하여 입체조형 치료계획에 응용할 수 있도록 한다. 재료 및 방법 : 치료용가속기의 카우치 각도를 변화시키면서 인체 치료부위별, EPID의 사용유무에 따라 치료 범위, 즉 갠트리 각도의 운동 범위를 측정하였다. 결과 및 결론 : 카우치의 각도, 인체 치료부위, EPID 유무에 따르는 갠트리 운동범위를 정량화하여 입체조형 치료계획시에 응용할 수 있도록 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.73-78
• /
• 2004

In this research, the photoelastic experimental hybrid method with Hook-Jeeves numerical method has been developed: This method is more precise and stable than the photoelastic experimental hybrid method with Newton-Rapson numerical method with Gaussian elimination method. Using the photoelastic experimental hybrid method with Hook-Jeeves numerical method, we can separate stress components from isochromatics only and stress intensity factors and stress concentration factors can be determined. The photoelastic experimental hybrid method with Hook-Jeeves had better be used in the full field experiment than the photoelastic experimental hybrid method with Newton-Rapson with Gaussian elimination method.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제13권2호
• /
• pp.151-155
• /
• 2006

Let $\gamma$ be a $C_2$ curve in the open unit disk $\mathbb{D}. Flinn and Osgood proved that $K_{\mathbb{D}}(z,\gamma){\geq}1$ for all $z{\in}{\gamma}$ if and only if the curve ${\Large f}o{\gamma}$ is convex for every convex conformal mapping $\Large f$ of $\mathbb{D}, where $K_{\mathbb{D}}(z,\;\gamma)$ denotes the hyperbolic curvature of $\gamma$ at the point z. In this paper we establish a generalization of the Flinn-Osgood characterization for a curve with the hyperbolic curvature at least 1.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.408-415
• /
• 1998

The analysis model is the power law creep material containing an elliptical rigid inclusion subjected to the arbitrarily directional stress on infinite boudary. The stress analysis is performed using the conformal mapping function and complex pseudo-stress function. The stress distributions near an elliptical rigid inclusion are obtained with various ellipse shapes, strain hardening exponents and directions of applied stress.