• Computers and Concrete
• /
• 제8권1호
• /
• pp.23-41
• /
• 2011

The behaviour of concrete confined by transverse reinforcement is a classical topic. Numerous studies have been conducted to establish the stress-strain relationships for concrete under various confining reinforcement arrangements. Many empirical and semi-empirical formulas exist. Simplified analytical models have also been proposed to evaluate the increase in the strength and ductility of confined concrete. However, relatively few studies have been conducted to utilise advanced computational models for a realistic simulation of the behaviour of concrete confined by transverse reinforcement. As a matter of fact, high fidelity simulations using the latest numerical solvers in conjunction with advanced material constitutive models can be a powerful means to investigating the mechanisms underlying the confining effects of different reinforcement schemes. This paper presents a study on the use of high fidelity finite element models for the investigation of the behaviour of concrete confined by stirrups, as well as the interpretation of the numerical results. The development of the models is described in detail, and the essential modelling considerations are discussed. The models are then validated by simulating representative experimental studies on short columns with different confining reinforcement schemes. The development and distribution of the confining stress and the subsequent increase in the axial strength are examined. The models are shown to be capable of reproducing the behaviour of the confined concrete realistically, paving a way for systematic parametric studies and investigation into complicated confinement, load combination, and dynamic loading situations.

• 콘크리트학회논문집
• /
• 제21권2호
• /
• pp.169-178
• /
• 2009

현행 도로교설계기준의 철근콘크리트 교각 심부구속 횡방향철근량 산정식은 중심축력을 받는 기둥에서 콘크리트 피복이 탈락된 후 콘크리트 심부만으로 저항하는 축강도가 콘크리트 피복이 탈락되기 이전의 축강도 이상이 되기 위하여 필요한 횡구속 철근비로서 콘크리트 압축강도, 횡방향철근 항복강도 및 단면적비율을 주요변수로 고려하고 있다. 이들 변수 중 피복두께에 따라 달라지는 전체단면적과 심부단면적의 단면적비율은 압축파괴 영역에서의 강도발현 측면을 고려한 변수이므로 교각과 같이 작용축력이 상대적으로 낮아 축력보다는 모멘트에 의해서 지배되는 인장파괴 영역의 연성거동 측면에서는 단면적비율이 미치는 영향은 크지 않다. 그러나 설계기준의 횡방향철근량 산정식 자체가 교각의 내진거동에 중요한 요소인 연성능력을 직접적으로 고려한 식이 아니기 때문에 단면크기가 상대적으로 작은 경우 또는 내구성 등의 확보 차원에서 콘크리트 피복두께가 증가하여 단면적비율이 과도하게 커지는 경우에는 교각의 시공성 및 경제성이 저하될 정도로 많은 횡방향철근량이 요구되는 문제점을 야기한다. 따라서 본 논문에서는 콘크리트 피복두께가 심부구속 횡방향철근량 산정식에 미치는 영향을 비교, 분석하고 보다 합리적인 내진설계를 위한 심부구속 횡방향철근량 산정식을 수정 제안하였으며 국내 외에서 수행된 실험 결과를 바탕으로 제안식의 안전율 및 타당성을 검증하였다.

• 한국해양공학회지
• /
• 제16권5호
• /
• pp.49-55
• /
• 2002

The compression anchor is characterized by decrement of progressive failure, simple site work, economy and durability compared with tension anchor. In this paper, compression anchor is analysed through the laboratory element tests. The formula to be estimate the grout strength in fixed part of compression anchor and the effective reinforcement method for several types of soil were suggested. The following conclusions were made from this study : (1) A formula, which is able to calculate the grout strength in the fixed part of the compression anchor, is suggested. (2) The strength increment ratios( $R_{si}$) are 100％, 132％, 147％, 217％ according to the reinforcement method of grout. The reinforcement method is Non, Outside spiral, Inside-Outside spiral, Steel pipe, respectively. (3) The strength increment ratios( $R_{si}$) by reinforcing can be 8.23 times the strength increment effect according to the reinforcement types and ground confining pressure. (4) The steel pipe reinforcement is most effective in decomposed soil while, in the case of hard rock ground, high confining pressure is exerted on the grout, so there is no need to use reinforcements.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.7-8
• /
• 2009

본 연구에서는 콘크리트 피복두께가 철근콘크리트 기둥의 횡방향 심부구속철근량 산정식에 미치는 영향을 비교, 분석하고 보다 합리적인 철근콘크리트 교각의 내진설계를 위한 횡방향 심부구속철근량 산정식을 수정 제안하였으며 국내 외에서 수행된 실험결과를 바탕으로 제안식의 안전율 및 타당성을 검증하였다.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.181-189
• /
• 1999

An experimental study was performed on the Pull-out behavior of 90-deg standard hooks from the exterior beam-column connections. the effects of the number of hooked bars and fiber reinforcement of the joint area were investigated with the following conclusions : (1) Under the pull-out action of hooked bars. the damage and cracking of joint area the number of hooks pulling out from a joint increases; (2) Substitution of the transverse column (confining) reinforcement with steel fibers at the joint region effectively reduces the extent of cracking in exterior joints caused by the pull-out of hooked bars; (3) The pull-out strength and post-peak ductility of hooked bars are adversely influenced by the increase in number of hooks pulling out from an exterior joint. Current hooked bar anchorage design guidelines may be improved by considering the effect of the number of hooked bars on anchorage conditions at the exterior joints; and (4) The strength and ductility of hooked bars under pull-out forces are positively influenced by substituting the conventional confining reinforcement of exterior joints with steel fibers . The application of steel fibers to the exterior joints is an effective technique for improving the anchorage conditions of hooked bars, and also for reducing the congestion of reinforcement in the beam-column connections.

• 한국강구조학회 논문집
• /
• 제25권3호
• /
• pp.243-254
• /
• 2013

내부구속중공 RC(Internally Confined Hollow RC, ICH RC) 기둥이란 중공 RC 기둥의 중공부에 내부튜브를 삽입하여 코어 콘크리트를 3축 구속 상태에 놓이게 하여 기둥의 강도와 연성도를 증가시킨 기둥이다. ICH RC 기둥의 구속응력에 대한 연구는 선행 연구자에 의하여 이루어 졌으나 외부 구속응력에 대한 연구만 진행된 상태이다. 본 연구에서는 중공 RC 기둥과 ICH RC 기둥의 구속응력을 유한요소 해석프로그램을 이용하여 분석하였다. 이론 구속응력과 외부 구속응력 그리고 내부 구속응력과의 관계를 도출하였으며, 이를 이용하여 기존의 내부 튜브 파괴조건식을 기반으로 수정 내부튜브 파괴 조건식을 제안하였다. 이론 구속응력과 내부 구속응력과의 관계를 회귀 분석식을 이용하여 나타내어 내부 구속응력을 쉽게 산정할 수 있다. 또한 수정 내부 튜브 파괴 조건식을 이용하여 ICH RC 기둥을 설계할 경우 동일 구속응력대비 기존의 파괴조건식보다 약 50%의 내부 튜브 두께를 감소할 수 있어 경제성을 확보하였다.

• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.351-363
• /
• 2020

Based on the dynamic tests of recycled aggregate concrete (RAC) short columns confined by the hoop reinforcement, the dynamic failure mechanism and the mechanical parameters related to the constitutive relation of confined recycled aggregate concrete (CRAC) were investigated thoroughly. The fracturing sections were relatively flat and smooth at higher strain rates rather than those at a quasi-static strain rate. With the increasing stirrup volume ratio, the crack mode is transited from splitting crack to slipping crack constrained with large transverse confinement. The compressive peak stress, peak strain, and ultimate strain increase with the increase of stirrup volume ratio, as well as the increasing strain rate. The dynamic confining increase factors of the compressive peak stress, peak strain, and ultimate strain increase by about 33%, 39%, and 103% when the volume ratio of hoop reinforcement is increased from 0 to 2%, but decrease by about 3.7%, 4.2%, and 9.1% when the stirrup spacing is increased from 20mm to 60mm, respectively. This sentence is rephrased as follows: When the stirrup volume ratios are up to 0.675%, and 2%, the contributions of the hoop confinement effect to the dynamic confining increase factors of the compressive peak strain and the compressive peak stress are greater than those of the strain rate effect, respectively. The dynamic confining increase factor (DCIF) models of the compressive peak stress, peak strain, and ultimate strain of CRAC are proposed in the paper. Through the confinement of the hoop reinforcement, the ductility of RAC, which is generally slightly lower than that of NAC, is significantly improved.

• 복합신소재구조학회 논문집
• /
• 제3권2호
• /
• pp.28-35
• /
• 2012

Recently, there is to increase interest in seismic performance of piers. Hollow section is applied to increasing the seismic performance of piers. However, hollow RC pier becomes the biaixial confining state because hollow part is not confined. The pier is developed brittle failure from inner face in hollow part. A tube is inserted in hollow part to become the weakness. This is ICH RC(Internally Confined Hollow RC) pier. This pier is enhanced stiffness, strength, and ductility by core concrete has triaxial confining stress. In this paper is researched about parameters effect the seismic performance. Parameters are hollow ratio, transverse reinforcement, longitudinal reinforcement, and concrete strength.

• Structural Engineering and Mechanics
• /
• 제84권2호
• /
• pp.239-251
• /
• 2022

The use of lateral reinforcement in confined concrete columns can improve bearing capacity and deformability. The lateral responses of lateral reinforcement significantly influence the effective confining pressure on core concrete. However, lateral strain-axial strain model of concrete columns confined by lateral reinforcement has not received enough attention. In this paper, based on experimental results of 85 concrete columns confined by lateral reinforcement under axial compression, the effect of unconfined concrete compressive strength, volumetric ratio, lateral reinforcement yield strength, and confinement type on lateral strain-axial strain curves was investigated. Through parameter analysis, it indicated that with the same level of axial strain, the lateral strain slightly increased with the increase in the unconfined concrete compressive strength, but decreased with the increase in volumetric ratio significantly. The lateral reinforcement yield strength had slight influence on lateral strain-axial strain curves. At the same level of lateral strain, the axial strain of specimen with spiral was larger than that of specimen with stirrup. Furthermore, a lateral strain-axial strain model for concrete columns confined by lateral reinforcement under axial compression was proposed by introducing the effects of unconfined concrete compressive strength, volumetric ratio, confinement type and effective confining pressure, which showed good agreement with the experimental results.

• Structural Engineering and Mechanics
• /
• 제41권3호
• /
• pp.379-393
• /
• 2012

Of the various methods of splicing reinforcing bar in reinforced concrete structure, mortar-filled sleeve reinforcement splice offers diverse benefits, not only in terms of structural performance but also for the construction process. Consequently, after the mortar-filled sleeve splices have been developed in recent years, research and development on these splices has been actively carried out, in order to evaluate its macro structural performance, such as its strength and stiffness, with the aim of enabling this system to be applied to construction in the field as early as possible. However, to make a proper evaluation on the overall structural performance of the mortar-filled sleeve reinforcing bar splice, it is of critical importance to understand the lateral confining action of the sleeve, which is known to affect the bond strength between the embedded bar and mortar in the sleeve. Accordingly, in this study, an experiment of monotonic loading and cyclic loading was conducted with a full-sized mortar-filled sleeve splice attaching strain gauges on the sleeve surface with experimental variables such as development length of bar, etc. Based on the test results, the effect of the lateral confining action of the sleeve was analyzed and considered in terms of the bond strength between the bar and mortar in this splice.