• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.443-448
• /
• 1995

Three anode configurations of six-jet, cone-jet and cylindrical-jet are tested for their analytical performance under power mode operation. The effect of pressure, power and gas flow rate on atomic absorption signals have been studied. The increase of atomic absorption signal of sample element is observed at a fixed pressure in all configurations as the gas flow rate increase up to 300-600 seem, and as the power dissipated in the glow discharge cell increase. The lower the pressure is in the glow discharge cell at a fixed discharge power and argon flow rate, the greater the absorbance of sample element is. The optimum conditions are taken from these data and a calibration curve of Cu in low-alloy steel sample is obtained. In this calibration curve, six-jet configuration shows the best analytical results varies as the sample element.

• Applied Microscopy
• /
• v.34 no.3
• /
• pp.199-209
• /
• 2004

The migut epitheluim of the last instar larva in the mosquito larvae, Anopheles sinensis was observed with electron microscopes. The midgut epitheluim of the mosquito larva is composed of a single-layered columnar absorptive cells, regenerative cells and secretory granular cells. The free surface of the columnar absorptive cells has a regular array of microvilli 'brush border', while cell membranes close to the basal lamina are extrmely infolded and a lot of mitochondria are concentrated in those processes. The columnar absorptive cells also contain cell organelles expected to be found in absorptive cell. Midgut regenerative cells which are positioned basally in the epithelium form the groups, which are called 'nidi', composed of 1 or $2{\sim}3$ cells, they show darker appearance than the columnar absoptive cells. The secretory granular cells contain numerous electron dense granules, $200{\sim}400$ nm in diameter. The cone shaped secretory granular cells are located in the basal portion of the midgut epitheluim. The epithelium is surrounded by the subepithelial space and muscle bundles. The subepithelial space, which is filled with fibrous connective tissue, is innervated by many axon cells and tracheoles.

• The Korean Journal of Malacology
• /
• v.27 no.2
• /
• pp.121-129
• /
• 2011

The ultrastructural characteristics of germ cell development during spermatogenesis and mature sperm morphology of in male Scapharca subcrenata were investigated by transmission electron microscope observation. Spermatogonia are located nearest the outer wall of the acinus, while spermatocytes and spermatids are positioned near the accessory cells. The accessory cells, which is in close contact with developing germ cells, contained a large quantity of glycogen particles and lipid droplets in the cytoplasm. Therefore, it is assumed that they are involved in supplying of the nutrients for germ cell development. The morphologies of the sperm nucleus and the acrosome of this species are the oval shape and cone shape, respectively. Spermatozoa are approximately 45-$50{\mu}m$ in length including a sperm nucleus (about $1.30{\mu}m$ in length), an acrosome (about $0.59{\mu}m$ in length), and tail flagellum (about 43-$47{\mu}m$). The axoneme of the sperm tail shows a 9 + 2 structure. As some characteristics of the acrosomal vesicle structures, the right and left basal rings show electron opaque part (region), and also the anterior apex part of the acrosomal vesicle shows electron opaque part (region). These characteristics of the acrosomal vesicle were found in Acinidae and other several families in subclass Pteriomorphia. These common characteristics of the acrosomal vesicle in subclass Pteriomorphia can be used for phylogenetic and taxonomic analysis as a taxonomic key or a significant tool. The number of mitochondria in the midpiece of the sperm of this species are five, as one of common characteristics appear in most species in Arcidae and other families in subclass Pteriomorphia. The acrosomal vesicles of Arcidae species do not contain the axial rod and several transverse bands in acrosome, unlkely as seen in Ostreidae species in subclass Pteriomorphia, These characteristics can be used for the taxonomic analysis of the family or superfamily levels as a systematic key or tools.

• Journal of Periodontal and Implant Science
• /
• v.50 no.6
• /
• pp.418-434
• /
• 2020

Purpose: The purpose of the present study was to evaluate the effect of silica-calcium phosphate composite (SCPC) granules on bone regeneration in extraction sockets. Methods: Ten patients were selected for a split-model study. In each patient, bone healing in SCPC-grafted and control ungrafted sockets was analyzed through clinical, radiographic, histomorphometric, and immunohistochemical assessments 6 months postoperatively. Results: A radiographic assessment using cone-beam computed tomography showed minimal ridge dimension changes in SCPC-grafted sockets, with 0.39 mm and 1.79 mm decreases in height and width, respectively. Core bone biopsy samples were obtained 6 months post-extraction during implant placement and analyzed. The average percent areas occupied by mature bone, woven bone, and remnant particles in the SCPC-grafted sockets were 41.3%±12%, 20.1%±9.5%, and 5.3%±4.4%, respectively. The percent areas of mature bone and woven bone formed in the control ungrafted sockets at the same time point were 31%±14% and 24.1%±9.4%, respectively. Histochemical and immunohistochemical analyses showed dense mineralized bundles of type I collagen with high osteopontin expression intensity in the grafted sockets. The newly formed bone was well vascularized, with numerous active osteoblasts, Haversian systems, and osteocytes indicating maturation. In contrast, the new bone in the control ungrafted sockets was immature, rich in type III collagen, and had a low osteocyte density. Conclusions: The resorption of SCPC granules in 6 months was coordinated with better new bone formation than was observed in untreated sockets. SCPC is a resorbable bone graft material that enhances bone formation and maturation through its stimulatory effect on bone cell function.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.4
• /
• pp.207-218
• /
• 2022

Objectives: This study aimed to define the prevalence and characteristics of skull base anomalies and the features of sphenoid sinus pneumatization (SSP). Materials and Methods: Five hundred cone-beam computed tomography scans were evaluated retrospectively for the presence of fossa navicularis magna (FNM), canalis basilaris medianus (CBM), sphenoid emissary foramen (SEF), and/or Onodi cells (OC). Patterns of the SSP and sphenoid sinus mucosa dimensions (SSMD) were also recorded. Results: The prevalence of FNM, CBM, SEF, and OC was 26.0%, 22.4%, 47.4%, and 18.4%, respectively. Two hundred sixty-two (52.4%) sellar-type SSP were defined, followed by post-sellar 191 (38.2%), pre-sellar 31 (6.2%), and conchal 16 (3.2%) types. The frequency of SSMD less than 1 mm, 1-3 mm, and greater than 3 mm was 40.6%, 38.4%, and 21.0%, respectively. An SEF was detected more frequently in females, while SSMD greater than 3 mm was more frequent in males. An FNM was more prevalent in the 18-29 and 30-39 age groups and SEF was significantly less frequent in patients over 60 years of age compared to other age groups. A sinus mucosa larger than 3 mm was more common in the younger than 18 year group. The frequency of post-sellar-type pneumatization was lower in patients younger than 18 years. Conclusion: Skull-base anomalies are common and may be detected incidentally during imaging procedures. The sphenoid sinus, its variations, and pneumatization patterns should also be taken into consideration in imaging procedures performed for various purposes.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.55-55
• /
• 2023

With the COVID-19 pandemic, there is increasing interest in anti-obesity strategies. According to the National Statistical Office, the obesity rate in Korea was 38.3% in 2020 and 37.1% in 2021. Obesity is a risk factor for several severe diseases, including stroke, heart disease, type 2 diabetes, and certain types of cancer. Pinus rigida × Pinus taeda is a hybrid of Pinus rigida Mill and Pinus taeda Linn, and its cones are considered a by-product. Although previous studies have investigated their pharmacological effects on antioxidant activity and protection against oxidative DNA damage, few researchers have explored their potential as functional natural materials. Therefore, we evaluated the anti-obesity effects of the cone of ethyl acetate fraction of P. rigida × P. taeda (ERT), specifically its ability to inhibit lipid accumulation. Our analysis showed that ERT contains phytochemicals (catechin and caffeic acid) which are known to improve immune function and inhibit cell damage. ERT inhibited lipid droplet accumulation at the cellular levels through Oil Red O staining. Furthermore, ERT suppressed the expression of adipogenic transcription factors (PPARγ and CEBP/α) as well as downstream lipogenic target genes (FAS and SREBP-1) thereby inhibiting adipogenesis. ERT also down-regulated key adipogenic markers, including aP2α, while inducing the phosphorylation of AMPK. It has been reported that PPARγ and CEBP/α are expressed in the early stages of adipose differentiation, while SREBP-1 is expressed in the late stage. Therefore, our findings suggest that ERT activates AMPK signaling pathways, which inhibits adipogenic transcription factors (PPARγ, C/EBPα, and SREBP1) and lipogenic genes (FAS and aP2α), thereby blocking lipid accumulation and preventing obesity and related disorders. ERT showed potential as a new resource for developing a functional material for anti-obesity agents.

• Korean Journal of Animal Reproduction
• /
• v.17 no.3
• /
• pp.193-199
• /
• 1993

Bovine follicular oocytes were matured in two different conditions, TCM 199＋10% FBS with or without hormones (0.01 unit/ml ovine follicle stimulating hormone, 0.01 unit/ml ovine luteinizing hormone and 1$\mu\textrm{g}$/ml $\beta$-estradiol). There was no significant difference in maturation and fertilization rates of the oocytes between two groups. The result indicates that hormonal treatment does not have beneficial effect on in vitro maturation and fertilization of follicular oocytes. IVF-derived cone-cell bovine embryos were injected with foreign DNA (CChcLf) by microinjection method and then co-cultrued with bovine oviductal epithelial cells. Developmental rate of microinjected embryos to blastocyst stage (21%) was similar to that of non-injected embryos(29%). This result represents that microinjected bovine embryos produced in vitro have a potential of development to normal blastocysts.

• Imaging Science in Dentistry
• /
• v.43 no.1
• /
• pp.49-53
• /
• 2013

Cysts of the mandibular condyle are rare and can be difficult to diagnose and treat. Clinically, a simple bone cyst is asymptomatic and often discovered incidentally on routine radiographic examination. This report shows an atypical simple bone cyst occurring in the mandibular condyle showing recurrence after surgical curettage. Radiologically, this lesion involving the mandibular condyle should be distinguished from other similar lesions such as a chondroma, a central giant cell granuloma, and an aneurysmal bone cyst. Radiographic assessment was useful for forecasting the prognosis of a simple bone cyst. Possible reasons for the recurrence were discussed radiographically.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1254-1260
• /
• 2005

The advanced country established the test standard (e.g., BS, EN) to measure the toxic gases quantitatively and, have applied to enhance the fire safety of railway car. We must also follow the procedures to use interior material for railway car as stated the Safety regulation for the urban railway car. Currently, various interior materials are used to obtain the fire safety of railway car. The amount of toxic gases moved into the FT-IR gas cell via sampling line from the ISO 5659 chamber using cone heater was measured and compared the results for each materials.

• Molecules and Cells
• /
• v.21 no.1
• /
• pp.76-81
• /
• 2006

Tubulin is synthesized in the cell body and must be delivered to the axon to support axonal growth. However, the exact form in which these proteins, in particular tubulin, move within the axon remains contentious. According to the "polymer transport model", tubulin is transported in the form of microtubules. In an alternative hypothesis, the "short oligomer transport model", tubulin is added to existing, stationary microtubules along the axon. In this study, we measured the translocation of microtubule plus ends in soma segments, the middle of axonal shafts and the growth cone areas, by expressing GFP-EB3 in cultured Xenopus embryonic spinal neurons. We found that none of the microtubules in the three compartments were transported rapidly as would be expected from the polymer transport model. These results suggest that microtubules are stationary in most segments of the axon, thus supporting the model according to which tubulin is transported in nonpolymeric form in rapidly growing Xenopus neurons.