• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.68-69
• /
• 2007

We have prepared p-type ZnO:Al films in pure oxygen ambient on n-type Si (100) and homo buffer layers by RF magnetron sputtering system. Hall effect measurement shows that the film annealed at $600^{\circ}C$ possesses p-type conductivity and the film annealed $800^{\circ}C$ does not. PL spectra show different properties of p- and n-type ZnO film. The corresponding peaks of PL spectra of p- and n-type show at about same positions. The intensities of high photon energy of n-type film on buffer shows decreasing tendency.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.142-145
• /
• 2008

Process simulation requires accurate and reliable data for a wide variety of material properties, ranging from thermal conductivity to flow stress curves. Traditionally such data are gathered from experimental sources, which has significant disadvantages in that not all of the required data is readily available, it may be from various sources that are themselves inconsistent, measurement of high temperature properties is expensive, and furthermore the properties can be sensitive to microstructure as well as to alloy composition. This article describes the development of a new multi-platform software program called JMatPro, which is based on CALPHAD methodology, for calculating the properties and behavior of multi-component alloys. A feature of the JMatPro is that the calculations are based on sound physical principles rather than purely statistical methods. Thus, many of the shortcomings of methods such as regression analysis can be overcome.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1191-1194
• /
• 2004

최근 항공우주산업을 비롯한 자동차, 선박, 철강, 건설, 전기, 국방, 금속산업 등 산업의 현장에서 첨단소재들을 널리 사용하고 있으며, 특히 비자성 금속재료에 대한 도전율 특성의 정밀분석이 요구되고 있다. 따라서 본 연구는 비자성 재료의 전기 도전율에 대해 널리 사용되고 있는 3가지의 측정방법을 통하여 정확한 측정과 함께 비교 분석하였으며, 이 측정 방법에 따라 평가된 도전율 측정결과는 0.5 %이내의 정확도에서 일치하고 있는 것으로 나타났다.

• Electronic Materials Letters
• /
• v.14 no.6
• /
• pp.774-783
• /
• 2018

Full maximum-entropy mobility-spectrum analysis (FMEMSA) is the best algorithm among mobility spectrum analyses by which we can obtain a set of partial-conductivities associated with mobility values (mobility spectrum) by analyzing magnetic-field-dependent conductivity-tensors. However, it is restricted to a direct band-gap semiconductor and should be modified for materials with other band structures. We developed the modified version of FMEMSA which is appropriate for a material with a single anisotropic valley, or an indirect-band-gap semiconductor quantum-well with a single non-degenerate conduction-band valley e.g., (110)-oriented AlAs quantum wells with a single anisotropic valley. To demonstrate the reliability of the modified version, we applied it to several sets of synthetic measurement datasets. The results demonstrated that, unlike existing FMEMSA, the modified version could produce accurate mobility spectra of materials with a single anisotropic valley.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.676-680
• /
• 1998

The relaxation process of photogenerated carriers was investigated using conductivity measurement on ZnO under He, $H_2,\; CO_2\; and\; O_2$. The process was well explained with the rate constant of reaction or recombination of hole and electron, $k_h \;and\; k_e ( k_h > k_e)$, respectively. Generally, $k_h$ increased with the pressure of the gases. The slope of $k_h$ with respect to the pressure increased in the order of $H_2{\le}He, while $k_h$ of $O_2$ was sensitive to the history of the sample. The relaxation process on ZnO which was exposed to oxygen at 298 K and 573 K was observed during the illumination at 298 K and it was found that the rate constant of hole decreased with illumination time. From the result, it was suggested that the rate constant of photogenerated excess carriers was affected by the surface barrier of the semiconductor.

• International Journal of Railway
• /
• v.3 no.1
• /
• pp.19-27
• /
• 2010

In the present study, the electrical sliding wear and corrosion resistance of pure copper (Cu) and six age-hardened copper alloys (CuCr, CuZr, CuCrZr, CuNiSiCr, CuBe and CuBeNi) were investigated by a pin-on-disc tribometer and electrochemical measurement. Various copper-based alloys in the form of cylindrical pin were forced to slide against a counterface stainless steel disc in air under unlubricated condition at a sliding velocity of 31 km/h under normal load up to 20 N with and without electric current. The worn surface of and wear debris from the specimens were studied by scanning electron microscopy. Both mechanical wear and electrical arc erosion were the wear mechanisms for the alloys worn at 50 A. Owing to its good electrical conductivity, high wear and corrosion resistance, CuCrZr is a promising candidate as the overhead catenary material for electric traction systems.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.70-73
• /
• 2019

It was confirmed that current flowing in thin films below nm increases conductivity in diffusion currents by holes rather than electric currents by electrons. ZTO thin film, which was heat treated at $150^{\circ}C$, increased electron concentration, and thus increased capacitances. However, it was found that low current movement would be difficult as the degree of movement was reduced. Therefore, it was found that diffusion currents were more advantageous than drift currents by electrons in order to allow low current to be produced in very thin films of nm class.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.198-202
• /
• 1988

Several new palladium(II) complexes of aminophosphines, $(Pd(L)X_2)$, (L = $Ph_2PNH$ ++ $NR_2$; R = $CH_3(L_1)$, $C_2H_5(L_2)$ : X = Cl, Br, I, and NCS) that contain two different donor atoms of nitrogen and phosphorus as ${\pi}$-electron acceptor, were synthesized and characterized by conductivity measurement, ir, and UV/Vis-spectra. For the dithiocyanatopalladium(II) complexes with aminophosphines, it was confirmed that the thiocyanate group trans to phosphorus is coordinated as Pd-NCS mode and the one trans to nitrogen as Pd-SCN mode, and the aminophosphines form six-membered chelate ring. The spectra of dihalogenopalladium(II) complexes with aminophosphines show that the band maxima are shifted to the short wavelengths as the concentration is decreased.

• Korean Journal of Metals and Materials
• /
• v.49 no.4
• /
• pp.304-312
• /
• 2011

In this study, MOSFET type micro hydrogen gas sensors with platinum catalytic metal gates were designed, fabricated, and their electrical characteristics were analyzed. The devised MOSFET Hydrogen Sensors, called MHS-1 and -2, were designed with a platinum gate for hydrogen gas adsorption, and an additional sensing part for higher gas sensitivity and with a micro heater for operation temperature control. In the electrical characterization of the fabricated Pt-gate MOSFET (MHS-1), the saturated drain current was 3.07 mA at 3.0 V of gate voltage, which value in calculation was most similar to measurement data. The amount of threshold voltage shift and saturated drain current increase to variation of hydrogen gas concentration were calculated and the hydrogen gas sensing properties were anticipated and analyzed.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.14 no.4
• /
• pp.275-284
• /
• 1985

The thermophysical property values were determined and compared with each other according to the tine of surface treatment. The diffusivity values were obtained by the flash method, and the specific heat values were measured by the differential scanning density. The thermal conductivity values were calculated from the values of the thermal diffusivity, specific heat, and density. The nitrided steels were the structural carbon steels, carbon tool steels, alloy tool steels, and high speed tool steels.