• Tribology and Lubricants
• /
• v.37 no.6
• /
• pp.253-260
• /
• 2021

Metal pipes are used in a wide range of applications, from plumbing systems of large construction sites to small devices such as medical tools. When a liquid is enforced to flow through a metal pipe, a higher flow rate is beneficial for higher efficiency. Using high pressures can enhance the flow rate yet can be harmful for medical applications. Thus, we consider an optimal geometrical design to increase the flow rate in medical devices. In this study, we focus on cannulas, which are widely used small metal pipes for surgical procedures, such as liposuction. We characterize the internal flow rate driven by a negative pressure and explore its dependence on the key design parameters. We quantitatively analyze the suction characteristics for each design variable by conducting computational fluid dynamics simulations. In addition, we build a suction performance measurement system which enables the translational motion of cannulas with pre-programmed velocity for experimental validation. The inner diameter, section geometry, and hole configuration are the design factors to be evaluated. The effect of the inner diameter dominates over that of section geometry and hole configuration. In addition, the circular tube shape provides the maximum flow rate among the elliptical geometries. Once the flow rate exceeds a critical value, the rate becomes independent of the number and width of the suction holes. Finally, we introduce a slippery liquid-infused nanoporous surface (SLIPS) coating using nanoparticles and hydrophobic lubricants that effectively improves the flow rate and antifouling property of cannulas without altering the geometrical design parameter.

• Composites Research
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2007

Expanded graphite/carbon fiber hybrid conductive polymer composites were fabricated by the preform molding technique. The conductive fillers were mechanically mixed with a phenol resin to provide an electrical property to composites. The conductive filler loading was fixed at 60wt.% to accomplish a high electrical conductivity. Expanded graphites were excellent in forming a conductive networking by direct contacts between them while it was hard to get the high flexural strength over 40MPa with using only expanded graphite and phenol resin. In this study, carbon fibers were added in composites to compensate the weakened flexural strength. The effect of carbon fibers on the mechanical and electrical properties was examined according to the weight ratio of carbon fiber. As the carbon fiber ratio increased, the flexural strength increased until the carbon fiber ratio of 24wt.%, and then decreased afterward. The electrical conductivity gradually decreased as the increase of the carbon fiber ratio. This was attributed to the non-conducting regions generated among the carbon fibers and the reduction of the direct contact areas between expanded graphites.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.2
• /
• pp.225-246
• /
• 2020

More than technical or academic matter, mitigation of height restriction around airports is about up-dating out-dated policies that have not kept up with rapidly developing aircraft and air traffic control technologies. Above all, instead of calling out 'flight safety' that the public do not comprehend, it is important to examine and carry out measures that can protect people's right of property. MOLIT(Ministry of Land, Infrastructure, and Transport) after reviewing ICAO's Obstacle Limitation Surface TF, made an announcement to provide further plans that would apply to contracting states from 2026. However, residents of redevelopment areas near Kimpo international airport asserted that MOLIT's policy overlooks the reality of the redevelopment zone. ICAO, UN's specialized agency for civilian aviation, recommends in Annex 14, 4.2.4 that contracting states conduct an aeronautical study to determine the flight safety of horizontal surface(45m), excluding approach surface, and to mitigate height restrictions if no threat is found. Numerous countries including the United States have been following this recommendation and have been able to effectively protect people's right of property, whereas the South Korean government have not following it so far. The number of height restriction mitigation cases in the recent three months (2019. 7. 15~10. 14.) FAA of the United States have allowed after conducting an aeronautical study reaches 14,706. Japan and Taiwan also reconstruct airspace around airports in metropolitan areas in order to protect people's right of property. Just as the United States is following, MLIT should follow ICAO's recommendation in Annex 14. 4.2.4(Vol. 1. Airport Construction / Operation) and protect people's right of property by first applying aeronautical studies to the horizontal surface(45m) of flight safety zones until the specifics of ICAO's 2026 TF materialize.

• Korean Journal of Materials Research
• /
• v.22 no.2
• /
• pp.61-65
• /
• 2012

A $Li_2O-2SiO_2$ ($LS_2$) glass was investigated as a lithium-ion conducting oxide glass, which is applicable to a fast ionic conductor even at low temperature due to its high mechanical strength and chemical stability. The $Li_2O-2SiO_2$ glass is likely to be broken into small pieces when quenched; thus, it is difficult to fabricate a specifically sized sample. The production of properly sized glass samples is necessary for device applications. In this study, we applied spark plasma sintering (SPS) to fabricate $LS_2$ glass samples which have a particular size as well as high transparency. The sintered samples, $15mm\phi{\times}2mmT$ in size, ($LS_2$-s) were produced by SPS between $480^{\circ}C$ and $500^{\circ}C$ at 45MPa for 3~5mim, after which the thermal and dielectric properties of the $LS_2$-s samples were compared with those of quenched glass ($LS_2$-q) samples. Thermal behavior, crystalline structure, and electrical conductivity of both samples were analyzed by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and an impedance/gain-phase analyzer, respectively. The results showed that the $LS_2$-s had an amorphous structure, like the $LS_2$-q sample, and that both samples took on the lithium disilicate structure after the heat treatment at $800^{\circ}C$. We observed similar dielectric peaks in both of the samples between room temperature and $700^{\circ}C$. The DC activation energies of the $LS_2$-q and $LS_2$-s samples were $0.48{\pm}0.05eV$ and $0.66{\pm}0.04eV$, while the AC activation energies were $0.48{\pm}0.05eV$ and $0.68{\pm}0.04eV$, respectively.

• The Journal of Society for e-Business Studies
• /
• v.25 no.3
• /
• pp.109-130
• /
• 2020

Recently, the importance of research and development for technological innovation is increasing. The rapid development of research and development has a number of positive effects, but at the same time there are also negative effects that accelerate crimes of information and technology leakage. In this study, a research security level measurement model was developed that can safely protect the R&D environment conducted at the organizational level in order to prepare for the increasingly serious R&D result leakage accident. First, by analyzing and synthesizing security policies related to domestic and overseas R&D, 10 research security level evaluation items (Research Security Promotion System, Research Facility and Equipment Security, Electronic Information Security, Major Research Information Security Management, Research Note Security Management, Patent/Intellectual Property Security Management, Technology Commercialization Security Management, Internal Researcher Security Management, Authorized Third Party Researcher Security Management, External Researcher Security Management) were derived through expert interviews. Next, the research security level evaluation model was designed so that the derived research security level evaluation items can be applied to the organization's research and development environment from a multidimensional perspective. Finally, the validity of the model was verified, and the level of research security was evaluated by applying a pilot target to the organizations that actually conduct R&D. The research security level evaluation model developed in this study is expected to be useful for appropriately measuring the security level of organizations and projects that are actually conducting R&D. It is believed that it will be helpful in establishing a research security system and preparing security management measures. In addition, it is expected that stable and effective results of R&D investments can be achieved by safely carrying out R&D at the project level as well as improving the security of the organization performing R&D.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.2
• /
• pp.135-145
• /
• 2016

In Korea, a series of noise-reduced aluminum forms are being recently used in apartment housing construction. However, their complicated and time-consuming work processes, and the noise which is still generated due to the inherent property of aluminum when especially installing and dismantling them have been pointed out as a problem to be certainly solved for increasing their practical use in construction sites. The primary objectives of this study are proposing an optimal conceptual design of a newly designed noise-reduced aluminum form and verifying the technical feasibility by conducting a working mock-up drive experiment. Thus, conventional noise-reduced aluminum forms have been analyzed and three conceptual designs of a newly noise-reduced aluminum forms have been deducted. AHP has been applied to a survey data collected by interviewing field experts. A trade-off analysis results have shown that 'Noise-reduced System Aluminum Form with a Drop-down Floor Post and Adaptive Beam' the highest weights of safety(0.52), work convenience(0.54) and thus selected. The suggested conceptual design in this study improved problems of conventional system aluminum forms. It is also expected that the suggested design will be used as a reliable guideline for the actual development of an aluminum form that ensures noise-reduce, work convenience and labor safety.

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.419-443
• /
• 2007

Recently, the branch-out of foreign companies into domestic markets through M&A and the opened followed by the Free Trade Agreement(FTA) with America have made the environmental site assessments of specific site more necessary. In this study, through case study of conducting actual environmental site assessment by use of a toolbox approach at a large scale of chemical plant with various contaminants located in a coastal area, the problems of guideline of domestic environmental assessment of soil were complemented. And an efficient and economical assessment was achieved. All six steps such as basic investigation, environmental site history survey, sampling and analysis, installation of monitoring wells and hydrogeological survey, and data interpretation were conducted in this study. All results of document survey, geological lineament analysis, field geology survey of surrounding area, geophysical prospecting of the site, hydraulic conductivity, measurement of groundwater flow rate and direction, sampling and analysis at each step were associated and estimated as an integrated tool box approach. As a consequence of this study, toolbox approaches were very useful techniques for contamination level and site characterization of subsurface media. The given conditions to conduct a basic survey for domestic soil environment assessment of site by use of existing documents, as well as interviews with the owner/manager/user of all adjacent properties and thorough review of all practically reviewable records pertaining to the property and surrounding properties within "Guideline for Soil Environment Assessment" radii are very poor. As a result, the application of toolbox approach in the environment site assessment of site is not only more efficient and economical, but also could be very useful assessment to integrate the soil and groundwater contamination.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.2
• /
• pp.125-133
• /
• 2017

KAERI is conducting research on spent cladding hulls and additive metals to generate a solidification host matrix for the noble metal fission product waste in anode sludge from the electro-refining process to minimize the volume of waste that needs to be disposed of. In this study, alloy compositions Zr-17Cr, Zr-22Cr, and Zr-27Cr were prepared with or without eight noble metals representing fuel waste using induction melting. The microstructures of the resulting alloys were characterized and electrochemical corrosion tests were conducted to evaluate their corrosion characteristics. All the compositions had better corrosion characteristics than other Zr-based alloys that were evaluated for comparison. Analysis of the leach solution after the corrosion test of the Zr-22Cr-8NM specimen indicated that the noble metals were not leached during corrosion under 500 mV imposed voltage, which simulates a highly oxidizing disposal environment. The results of this study confirm that Zr-Cr based compositions will likely serve as chemically stable waste forms.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.39-46
• /
• 2013

In this paper, organic solar cells(OSCs) based on bulk-heterojunction structures were fabricated by spin coating method using polymer P3HT and fullerene PCBM as a photoactive layer. The fabricated OSCs had a simple glass/ITO/PEDOT:PSS/P3HT:PCBM/Al structures. The photoactive layer of mixed P3HT:PCBM was formed with 1:1 weight ratio. The hole transport layer(HTL) was used conducting polymer PEDOT:PSS concentration with gold nanoparticles. The annealing temperature and concentration of nanoparticles in HTL were verified to improve the OSC characterization. The percentage of gold nanoparticles in HTL were 0.5 wt% and 1.0 wt%, and the surface morphology, electrical properties and absorption intensities were investigated. The devices were 0.5 wt%, and the highest 3.1% of the powder conversion efficiency(PCE), 10.2 $mA/cm^2$ of the maximum short circuit current density($J_{SC}$), 0.535V of the open circuit voltage($V_{OC}$) and 55.8% of the fill factor(F.F) could be obtained when the nanoparticle concertration was 0.5 wt%. The annealing temperature of HTL was $110^{\circ}C$, $130^{\circ}C$, $150^{\circ}C$ in vacuum oven and measured the absorption intensities, surface morphology, crystallinity and electrical properties were investigated. The best property was obtained in HTL annealed at $130^{\circ}C$ for gold nanoparticles of 0.5 wt%, showing that $J_{SC}$, $V_{OC}$, F.F and PCE were about 12.0 $mA/cm^2$, 0.525V, 64.2% and 4.0%, respectively.

• Journal of the Korean Society of Radiology
• /
• v.10 no.5
• /
• pp.321-325
• /
• 2016

Dose creep is one of clinical errors that arises from the tester's inexperience or carelessness, and according to Task Group #116 of American Association of Physicists in Medicine, its continued occurrence is being reported in the digital method. At this point, the demand for an automatic exposure control device that minimizes the dose creep phenomenon and can improve reproducibility is increasing. In this study is to consider the automatic exposure control device sensor that can is not only easy to produce, but also reduce the dose creep phenomenon by conducting a research on high-efficient semiconductor sensor. As a result, the Intrinsic-type and PIN-type sensors have excellent optical property compared to Ref sensor, would have less shading effect, and have relatively low sensitivity, but would provide accurate feedback signals to automatic exposure control device with its consistent tendency according to exposure condition changes.