• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.923-930
• /
• 2018

Based on the application of an integrated dynamic brake (IDB) system that uses a PWM inverter fed-AC motor drive to operate the piston, a new active zero state PWM (AZSPWM) is proposed to improve the stability and reliability of the IDB system by suppressing the conducted electro-magnetic interference (EMI) noise under a wide range of load torque. The new AZSPWM reduces common-mode voltage (CMV) by one-third when compared to that of the conventional space vector PWM (CSVPWM). Although this method slightly increases the output current ripple by reducing the CMV, like the CSVPWM, it can be used within the full range of the load torque. Further, unlike other reduced common-mode voltage (RCMV) PWMs, it does not increase the switching power loss. A theoretical analysis is presented and experiments are performed to demonstrate the effectiveness of this method.

• 한국자동차공학회논문집
• /
• 제24권6호
• /
• pp.694-701
• /
• 2016

According to revolutionary developments in automobile technologies, eco-friendly advanced vehicles (hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc.) are rapidly increasing. The electromagnetic compatibility is getting more important for development of a vehicle because those advanced vehicles are driven by electric energy and equipped with more electric systems. In general, electromagnetic compatibility tests consist of an electromagnetic interference(EMI) test and an electromagnetic susceptibility(EMS) test. EMI test of the electric vehicles are needed not only in driving mode but also in charging mode because they must be recharged by much electric energy for driving. Depending on vehicle manufacturers, the charging device type and the location of charging device inlet in electric vehicles are various. In this paper, in order to investigate EMI of electric vehicles in charging mode in consideration of the direction of measuring antenna and the location of charging device inlet, a series of electromagnetic emission tests are conducted using three electric vehicles (neighborhood electric vehicle, electric vehicle and electric vehicle-bus). The test results show that electromagnetic emission measurements in charging mode are dependent on the direction of measuring antenna and the location of charging device inlet.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.278-287
• /
• 2019

In this study, a zero-crossing spike current issue in a totem-pole bridgeless power factor correction (PFC) converter is comprehensively investigated for the first time. Spike current occurs when input voltage crosses zero, becomes a noise source, and causes severe common mode emission issues. A generation mechanism for electromagnetic interference (EMI) is presented to investigate the EMI problem caused by zero-crossing issue, and a noise spectrum due to this issue is predicted by a theoretical analysis based on the Fourier coefficient of an approximate spike current waveform. Furthermore, a noise reduction method is proposed and then improved to reduce the spike current. Experimental measurements are implemented on a GaN-based totem-pole bridgeless PFC converter, and the spike current can be effectively suppressed through the proposed method. Furthermore, the noise spectrums measured without and with the reduced zero-crossing spike current are compared. Experimental results validate the analysis of the noise spectrum caused by the zero-crossing spike current issue.

• 한국융합학회논문지
• /
• 제7권6호
• /
• pp.23-28
• /
• 2016

본 연구에서 전력 변환 회로의 전자파적합성(EMC: Electromagnetic Compatibility)에 관한 설계 및 측정 결과를 제시하고 있다. 태양광 에너지 저장 장치에 주로 사용되는 LT3652 칩을 사용한 DC-DC 전력 변환 회로가 설계되어 제작되었다. 제작된 회로를 이용하여 원거리 방사, 근거리 전도성 및 복사성 방출에 대한 시뮬레이션이 ANSYS SIwave로 수행되었으며 결과가 제시되었다. 본 연구에서 불필요한 방사를 최소화하기 위해 콘덴서와 접지 포스트가 추가된 회로를 사용하였다. 전도 및 방사 방출은 CISPR 22의 표준화 된 시험 절차에 따라 EMC 전용무반사실에서 측정되었다. 개선된 회로를 사용하여 측정된 데이터를 제시하였고 개선 전후의 값들이 비교되었다. 제시된 결과를 보면 EMI 감소 기술이 적용된 회로에서 원치 않는 방출이 크게 감소하는 것을 보여주고 있다. 여기서 제안 된 결과는 전력 컨버터 모듈의 설계에 효율적으로 적용 가능한 기술이다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권3호
• /
• pp.147-154
• /
• 2003

This paper presents a high-frequency boost type ZVS-PWM chopper-fed DC-DC power converter with a single active auxiliary edge-resonant snubber at the load stage which can be designed for power conditioners such as solar photovoltaic generation, fuel cell generation, battery and super capacitor energy storages. Its principle operation in steady-state is described in addition to a prototype setup. The experimental results of boost type ZVS-PWM chopper proposed here, are evaluated and verified with a practical design model in terms of its switching voltage and current waveforms, the switching v-i trajectory and the temperature performance of IGBT module, the actual power conversion efficiency, and the EMI of radiated and conducted emissions, and then discussed and compared with the hard switching scheme from an experimental point of view. Finally, this paper proposes a practical method to suppress parasitic oscillation due to the active auxiliary resonant switch at ZCS turn-off mode transition with the aid of an additional lossless clamping diode loop, and can be reduced the EMI conducted emission.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.286-291
• /
• 2000

본 논문에서는 일반적인 EMI 노이즈 개요 및 SMPS(Switching Mode Power Supply)에서의 Noise 발생 메카니즘을 분석하고, 전도성 Noise를 측정하였으며, SMPS에서 발생되는 잡음행태를 분석하여 대책방법을 연구하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.27.1-27.1
• /
• 2008

• 한국정보통신학회논문지
• /
• 제19권7호
• /
• pp.1639-1645
• /
• 2015

UHD 고속영상 전송 시스템에서 EMI 특성은 특정 주파수 대역의 신호가 전기적, 구조적으로 주파수가 일치될 때, 에너지가 집중되고 신호의 흐름을 방해하여 왜곡이 발생하므로 시스템이 불안정해지는 원인이 된다. 이러한 신호의 왜곡을 제거하기 위하여 전원 무결성 분석과 EMI 현상에 대한 고주파 설계기법이 요구되어진다. 따라서 본 논문에서는 다층인쇄회로기판(MLB : Multi-Layer Printed Circuit Board) 구조에서 발생하는 고주파 잡음을 최소화하고 신호 무결성과 전원 무결성을 개선하면서 EMI를 억제하는 최적의 MLB 설계방법을 제안한다. 제안한 MLB의 특성 임피던스 파라미터는 비유전율 ε_r = 4.3, 고속영상 차동신호(HSVDS : High-Speed Vih = 0.145deo Differential Signaling)의 선로 폭 w = 0.203, 패턴의 간격 d = 0.203, 패턴의 두께 t = 0.0175, 베타층 위의 높이 를 고려하여 특성 임피던스 Zdiff = 100.186Ω으로 설계하였다. 실험결과 아이패턴의 출력 크기가 672mV, 지터는 6.593ps, 전송 주파수가 1.322GHz, 신호 대 잡음비는 29.62dB로 전송 품질이 개선 전보다 약 10dB 향상 되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.72-75
• /
• 2008

The Electromagnetic Interference(EMI) in railway applications is largely due to doing the power conversion for traction and Auxiliary system on the Highspeed Electric Multiple Unit-400X(HEMU-400X). In order to research on EMI in railway applications, it were included how much the HEMU-400X generates it and it has an effect on the equipments of electric system which resulted from Power Line Disturbance (PLD) phenomenon by the loss of contact during its running. In this study, the dynamic characteristic of a contact wire and pantograph suppling electrical power to high-speed trains are investigated. The analysis of the loss of contact based on Power Simulator program software is performed to develop power line disturbance model suitable for high speed operation. It is confirmed that a contact wire and pantograph model are necessary for studying the dynamic behavior of the pantograph system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.793-797
• /
• 2003

Switching PFC converters are widely used not only to comply the power quality specification but also for maximum efficiency. However switching PFC converters generate serious electromagnetic interference (EMI). In this paper to solve this problem, we applied the APW(Anti Phase Winding) and RPWM(Ran-dom PWM) technique to PFC boost converter and obtained satisfactory results. Simulation and experimental results show the improved harmonic and reduced EMI effect in air-conditioner system.