• 융합신호처리학회논문지
• /
• 제24권2호
• /
• pp.82-89
• /
• 2023

선박 구조 특성상 격실 구조는 복잡하고 협소하여 작업 과정에서 안전사고가 빈번히 발생하고 있다. 사고의 주된 원인은 구조물 충돌, 낙하물, 독성물질 누출, 화재, 폭발, 질식 등이 존재한다. 사고 발생 시 작업자의 현장 상황을 파악하는 것이 피해를 완화하는 요소 중 하나이다. 이에 안전성을 확보하기 위해 선박 내 CCTV로 현장 상황을 모니터링하고 있으나, 기존의 방식으로는 사고를 예방하기엔 어려움이 있다. 이를 해결하기 위해 안전 기술로 위치 식별, 음성/영상 통신 기능이 탑재되는 스마트 안전모가 개발 중에 있다. 또한, 작업 구역 내 환경 정보 수집 및 저장기능을 포함한 온도, 습도, 진동, 소음, 기울기(자이로 센서), 가스 센서를 사용하여 스마트 안전모를 착용한 작업자에게 위험 상황을 알릴 수 있다. 이를 통해 스마트 안전모 및 환경 센서의 사용으로 선박 내 작업자의 안전성을 강화할 수 있을 것이다.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.81-94
• /
• 2007

The purpose of this study was to critically review biomechanical studies on foot orthoses (FO) in normal and diseased foot and provide beneficial information obtained from researches until now and future researching focus. The search was performed by Medline and Embase database including studies published in English from January 1980 to April 2007. The searching terms were foot orthoses, foot orthotics, insoles and shoe insert. 57 studies including 54 journal articles and 3 abstracts were finally selected under the conditions of having clinical trials, FO, control condition, movement, scientific measuring system. The reviewed studies were divided into 10 categories according to subject characteristics; healthy normal, excessive pronation or flexible flat foot, rheumatoid arthritis, diabetes, medial knee osteoarthritis, forefoot varus, plantar fasciitis, patellofemoral syndrome, cavus foot and finite element model. In summary, first, soft and semirigid FOs with some degree of cushioning showed much higher comfort and efficacy than rigid FO. Second, no big differences between prefabricated and custom FO were shown. Third, the full length's FO was preferable to the half length's FO or simple arch supports. Fourth, the wearing of FO combining medial arch supports and metatarsal dome made positive roles to enhance comfort and functionality and redistribute plantar pressure under the foot. Fifth, for patients with knee-related diseases lateral wedges were preferable. Sixth, measuring systems were properly applied according to the types of foot diseases.

• Tribology and Lubricants
• /
• 제31권1호
• /
• pp.21-27
• /
• 2015

We carry out experiments to characterize textured bearing steel with varying hole density and depth. Textured surface is believed to reduce the friction coefficient, and improve performance and wearing caused by third-body contact. We employ three lubrication regime conditions based on the Stribeck curve: boundary lubrication, mixed lubrication, and hydrodynamic lubrication. Ultrasonic machining is an untraditional machining method wherein abrasive grit particles are used. The hammering process on the work piece surface by abrasive provides the desired form. In this study, we create multi-holes on the bearing steel surface for texturing purposes. Holes are formed by an ultrasonic machine with a diameter of 0.534 mm and a depth of about 2-4 mm, and they are distributed on the contact surface with a density between 1.37-2.23%. The hole density over the surface area is an important factor affecting the friction. We test nine types of textured specimens using four times replication and compare them with the untextured specimen using graphs, as well as photographs taken using a scanning electron microscope. We use Analyzes variant in this experiment to find the correlation between each pair of treatments. Finally, we report the effect of hole density and depth on the friction coefficient.

• 복식
• /
• 제52권8호
• /
• pp.29-39
• /
• 2002

It was increased leisure hours by automation and computerization of industry. Many people spend on hours in enjoying leisure sports, and then. nowadays, Many women tend to prefer casual wear to formal suits. The purpose of this research was to design of outdoor-wear that improve the functional and aesthetic effects for clothing comfort. Total 4 design prototype consisting of jumper and slacks were developed for this research. Outdoor-wear design forced on armhole type of jumper and ease of the back crotch length of slacks to improve the functional and aesthetic effects. And Outdoor-wear design focused on color harmony to aesthetic effects. Ease amount and materials of jumper and slacks were controlled. Design A: Jumper was designed as dropped shoulder with set-in steeve and band collar, A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of outside seam line of slacks Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 7% of total crotch length: Design B 4DM cut pattern were applied to the jumper and slacks pattern. A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of inside seam line of thigh. Color of jumper and slacks were grey and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design C : Jumper was designed as the set in sleeve and hood. and A break- away zipper to facilitate ventilation control were made the ares of the armhole and elbow. Color of jumper and slacks were ivory and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design D : Jumper was designed as raglan sleeve. Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Total six females, ages 20-45, served as subjects for this research. Subjects have standard body type, generally, wearing 66 size of ready-to-wear clothing. The performance of the newly designed outdoor-wear was evaluated for their effectiveness in several aspects such as conditions of skin temperature, sensory evaluation of comfort during body movements, appearance and color harmony and aesthetic collar design. Design 3 was appeared to be the most positive in aesthetic evaluation and functional effects of design 2 of 4DM cut pattern was appeared to be beter than other designs.

• 한국환경보건학회지
• /
• 제3권1호
• /
• pp.27-44
• /
• 1976

This study was carried out to evaluate the harmful factors in working environments and to investigate the labor productivity after improvement of environments, surveying 93 industrial establishments of 10 industries located in Youngdeungpo industrial area in Seoul. The results obtained were as follows: 1) The highest noise level of 125dB(A) was indicated at the rolling process of transport equipment manufacturing industry. 2) The best illumination level was shown in precise machinery industry and the worst was indicated in rubber products, metallic products and transport equipment manufacturing industries. 3) Thermal conditions were above threshold limit value (TLV) at more than two processes of all industries except printing industry. 4) The highest dust concentration was determined in textile and wearing manufacturing industry. 5) Organic solvents were detected at 52 processes in 93 industrial establishments and 33 processes of them showed higher than TLV. The results about harmful chemicals were as follows: a) sulfur dioxide ($SO_2$)was determined higher than TLV on welding process of metallic product manufacturing industry and heat treatment process of transport equipment manufacturing industry. b) Carbon monoxide (CO) concentration was 700ppm at heat treatment process of transport equipment manufacturing industry, indicating 14 times of TLV. c) vinylchloride concentration in the air of PVC raw material mixing process and PVC preparation process of chemical product manufacturing industry was determined higher than TLV. d) Hydrochloride (HCl) concentration in the air of wire expanding process of transport equipment manufacturing industry was determined higher than TLV. 7) Higher values of lead concentration than TLV were determined at lead welding metallic product manufacturing industry and type planting process of process of printing industry, $1.8mg/m^3$ and $0.3mg/m^3$ respectively. 9) 22, 968 of 52, 855 workers (i.e. 43.5%) in 93 industries were exposed to various harmful agents. 10) It was found that the improvement of illumination in electric apparatus manufacturing industry (from 20~40 lux to 420 lux) resulted in an increase in productivity of 6.5% per capita and a decrease in faulty products of 19%. 11) Improvement of environments using local exhaust ventilation system resulted in a decrease of harmful substances lower than TLV and an increase in productivity of 11.4%. 12) Improvement of shovelling tools based on ergonomics resulted in a reduction in energy expenditure of 25.3% and an increase in productivity of 32.2% per capita.

• 대한의용생체공학회:의공학회지
• /
• 제29권4호
• /
• pp.316-322
• /
• 2008

The purpose of this study was to investigate muscle activation of lower extremity such as rectus femoris, tibialis anterior and soleus according to 0cm(bare foot), 4cm and 7cm heel height of shoe on the rocking surface in older women. 20 older women who did not have any lower musculoskeletal and neurological disorders in the past were participated in this study. Each subject was standing for 15 seconds on the level 8 of Biodex Stability System (BSS) while wearing 4cm and 7cm heel height shoes including bare foot. Electromyography was used to measure muscle activation of lower extremity, and the muscle activation was expressed as a percentage of maximal voluntary isometric contraction (% MVIC). We measured % MVIC of three muscles during 5 seconds except for the first 5 seconds and last 5 seconds. SPSS 12.0 program was used for this study. Repeated one-way analysis of variance(ANOVA) was performed to compare the significant difference among the muscles of lower extremities according to heel heights of shoe on the rocking plate. % MVIC of each muscle such as rectus femoris, tibialis anterior and soleus regarding heel heights of shoe had statistically significant differences (p<0.05). The results of contrast test were as follows; 1) % MVIC of rectus femoris had significant differences between barefoot and 4cm, and barefoot and 7cm. 2) % MVIC of tibialis anterior had significant differences between barefoot and 4cm, barefoot and 7cm, and 4cm and 7cm. 3) % MVIC of soleus had significant differences between barefoot and 7cm, 4cm and 7cm. The results indicate that all commonly responsive muscle on the conditions of barefoot, 4cm, and 7cm shoe height on the rcoking surface is tibialis anterior muscle. We found out that the more heels of shoe high, the more muscle activation increases. High-heeled shoes above 7cm remarkably increase the muscle activation of lower extremity and may result in muscle fatigue. Thus, these shoes may summate risk factors of falls in older women. We can acknowledge that the heels above 4 cm affect each muscle activation in lower extremity on the rocking surface.

• 한국치위생학회지
• /
• 제10권2호
• /
• pp.255-268
• /
• 2010

Objectives : In the field of dental hygiene, infections pose a serious problem. This issue has left many patients and dental staff exposed to microbes with potentially far-reaching effects. The purpose of this study was to find solutions which could improve Dental health policies and promote improved methods for the control of infections. This survey was conducted between March 3, 2008 and March 30, 2008, in the metropolitan area. The research was carried out in dental clinics and dental hygienists were surveyed through a questionnaire. Methods : Collected data was examined using the SPSS 14.0 program, using frequency, mean and standard deviation analysis, T-test, one-way ANOVA, Scheffe's test and Duncan's test. Further analysis was given using Logistic Regression. Results : The Performance of Infection Control by dental hygienists in Dental Clinics was shown at $2.96{\pm}0.42$. Disinfection, sterilization and the wearing of masks is high at $3.65{\pm}0.64$, $3.64{\pm}0.65$. The perception of the importance of infection control is higher among dental hygienists than dentists. Of the dental hygienists surveyed, 83.9% were exposed to at least one accident while at work. Age and years of experience were important in relation to infection control practices. The rate of infections and the number of accidents experienced related to the dental hygienists performance of infection control. The performance of infection control is influenced by the dental hygienists own perceptions, and the perceptions of their dentists. The dental hygienist's working conditions and their beliefs related to infection control were shown to influence their performance of infection control practices. Conclusion : At the conclusion of this investigation, it was determined that systematic refresher training of infection control should be delivered through further education and various media. Dental health care workers should be encouraged to practice these action items presented in the training. For successful implementation of infection control in every dental health-care setting, it is highly demanded that effective safe-guard tools, strategic support and standardized action items against infection problems are developed.

• 대한통합의학회지
• /
• 제3권3호
• /
• pp.49-57
• /
• 2015

Purpose : The purpose of this study was to identify whether static and dynamic balance in young men were influenced by the different height of insoles in their shoes. Methods : Eighteen healthy young men (mean $20.61{\pm}1.38years$) were recruited for this study. The subjects' static and dynamic balance were assessed while wearing three different height' insoles (0cm, 2cm, 3cm) in their tennis shoes. Anterioposterior (AP) and mediolateral (ML) sway velocity was measured for 20 seconds using a force plate (Good balance system, Finland) under four conditions including normal standing with eyes open and with eyes closed, and tandem standing with eyes open and with eyes closed. The Functional Reach Test (FRT) and Timed Up & Go (TUG) were also performed for each subject under each condition. Results : 1) ML and AP sway velocities in young men were significantly different according to the height of the insole in normal standing with eyes open and eyes closed. 2) ML and AP sway velocities in young men were not different according to the height of the insole in tandem standing with eyes open. 3) ML sway velocities in young men were significantly different according to the height of the insole in tandem standing with eyes closed, whereas AP sway velocities did not differ by height of the insole in tandem standing with eyes closed. 4) FRT scores in young men were significantly different according to the height of the insole. 5) TUG scores in young men were not significantly different according to the height of the insole. Conclusions : This study's results indicate that the static and dynamic balance in young men can be influenced by shoe insole height.

• Archives of Plastic Surgery
• /
• 제42권5호
• /
• pp.552-558
• /
• 2015

Background The Klippel-Trenaunay syndrome (KTS) is characterized by three clinical features, namely cutaneous capillary malformations, venous malformations, and soft tissue and/or bony hypertrophy of the extremities. The varied manifestations are attributed to the unpredictable clinical nature and prognosis of the syndrome. To elucidate the clinical characteristics of this disease, we reviewed a relatively large number of KTS patients who presented to our vascular anomalies center. Methods We conducted a retrospective study with 19 patients who were diagnosed with KTS and treated in our vascular anomalies clinic between 2003 and 2014, and examined their demographic characteristics, their clinical features, and the treatments administered. Results The sex distribution was balanced, with 9 (47%) males and 10 (53%) females. The mean follow-up period was 4.1 years (range, 7 months-9 years). Most of the patients received conservative treatments such as medication or physiotherapy. Compression therapies such as wearing of elastic garments/bandages were also administered, and surgical interventions were considered only when the patients became excessively symptomatic. Other treatments included laser therapy and sclerotherapy, and all the treatments were adjusted according to each case, tailored to the conditions of the individual patients. Conclusions KTS is an extremely rare, multifactorial disorder that induces widely varied symptoms. Because of this unique feature, plastic surgeons, when not careful, tend to attach a one-sided importance to typical symptoms such as limb hypertrophy or capillary malformation and thus overlook other symptoms and clinical features. KTS can be suspected in all infants who show capillary malformations or limb hypertrophy and require a multi-disciplinary approach for comprehensive management.

• 한국의류학회지
• /
• 제29권12호
• /
• pp.1619-1626
• /
• 2005

탄성직물의 내구성은 탄성직물에 포함된 스판덱스사의 성질변화가 큰 영향을 미친다. 그러므로 본 연구에서는 세탁조건이 스판덱스사의 길이, 강도와 신도, $300\%$신장 후의 영구탄성 변화에 미치는 영향을 조사하였다. 시료로는 굵기가 다른 스판덱스사와 heat-set 시 신장률이 다른 편성물을 가정용 드림세탁기에서 세탁온도, 세탁 전 침지시간과 세탁휫수를 달리하여 세탁한 후, 편성물로부터 스판덱스사를 분리하여 기계적 성질을 측정하였다 스판덱스사의 길이는 세탁온도가 높아지거나, $40\%$에서 세탁휫수가 증가하면 계속 감소하였으나 세탁 전 침지시간에 따른 영향은 비교적 적었다 섬유가 가늘수록 길이 수축률이 크며 세척 조건변화에 따른 수축률이 크게 증가하였다. 스판덱스사의 강도와 신도는 반복 세척 시의 감소가 뚜렷하였으며, heat-set 시에는 강도와 신도도 크게 감소하였고, heat-set 시에 가해준 신장률이 클수록 감소가 더 컸다. 한편 스판덱스사의 영구변형률은 세탁온도가 높으며, 침지시간이 길고, 세탁횟수가 많을 때 현저히 높았다. 대체적으로 굵은 스판덱스사의 영구변형률이 크며, 140D는 30회 세척 후에 $28.0\%$의 영구변형 이 일어났다. Heat-set로 스판덱스사의 영구변형은 늘어나며, heat-set 시에 신장률이 큰 스판덱스사의 영구변형이 더 많았다. DSC 열분석 곡선에서 스판덱스 섬유는 반복 세탁과 heat-set여부와 관계없이 동일한 융해온도를 나타내었으며, 이로부터 스판덱스 섬유의 hard segment분자쇄 길이는 세탁 또는 heat-set후에도 변화가 없는 것으로 보여진다.