• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.325-335
• /
• 1992

In this work, direct contact 4-stage fluidized bed heat exchanger is experimentally studied to develop a new type of heat exchanger which recovers the energy contained in the high temperature waste gas exhausted from the industrial furnaces. A sand is used as a heat transfer medium in this experiment. To determine the optimum operating condition, 11 different perforated plates which have a different free area ratio with different hole diameter are used in the experiment. From the room temperature experiment, the pressure drop which is caused by fluidized bed formation is observed. The high temperature experiment is carried out to seek the optimum operating condition of high heat efficiency at low heat exchanger operation cost. The results of experiment are as following. The pressure drop in the high temperature condition can be predicted from the results of the room temperature experiment. And Nusselt number becomes smaller due to the increased interference between sand particles as Reynolds number increases when the dilute phase fluidized beds are formed in nigh temperature condition. But heat transfer amount through the total sand surface area become larger due to the large resident amount of sand. Considering the heat transfer amount and the heat exchanger operation cost, perforated plates which have either a 30% or 35% of free area ratio with 15mm of hole diameter are best fitted for our goal of this work. The values of .phi. which is a dimensionless number representing the absorption heat amount per unit sand rate are in the range from 0.4 to 0.5, when Reynolds number of waste gas ranges from 25-30 with these perforated plates.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.3
• /
• pp.151-157
• /
• 2021

This paper is devoted to a convergence study of the nonlocal integral operator in peridynamics. The implicit formulation can be an efficient approach to obtain the static/quasi-static solution of crack propagation problems. Implicit methods require constly large-matrix operations. Therefore, convergence is important for improving computational efficiency. When the radial influence function is utilized in the nonlocal integral equation, the fractional Laplacian integral equation is obtained. It has been mathematically proved that the condition number of the system matrix is affected by the order of the radial influence function and nonlocal horizon size. We formulate the static crack problem with peridynamics and utilize Newton-Raphson methods with a preconditioned conjugate gradient scheme to solve this nonlinear stationary system. The convergence behavior and the computational time for solving the implicit algebraic system have been studied with respect to the order of the radial influence function and nonlocal horizon size.

• East Asian mathematical journal
• /
• v.29 no.3
• /
• pp.327-335
• /
• 2013

In this paper we consider the quadratic matrix equation which can be defined by $$Q(X)=AX^2+BX+C=0$$, where X is a $n{\times}n$ unknown complex matrix, and A, B and C are $n{\times}n$ given matrices with complex elements. We first introduce a couple of condition numbers of the equation Q(X) and present normwise condition numbers. Finally, we compare the results and some numerical experiments are given.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.3
• /
• pp.36-43
• /
• 1997

In order to make unmanned machining systems with satisfactory performances, it is necessary to incorporate appropriate condition monitoring systems in the machining workstations to provide the required intelligence of the expert. This paper deals with condition monitoring for tool wear and breakage during turning operation. Developing economic sensing and identification methods for turning processes, sound pressure measurement and digital signal processing technique are proposed. The validity of the proposed system is confirmed through the large number of cutting tests.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.390-397
• /
• 1998

An approach to identifying input forces is proposed using measured structural dynamic responses and its analytical model. The identification of input forces is a reverse process and ill-conditioned problem. Its solution is unstable and generally case dependent. In this paper, the ill-condition is described considering characteristic matrix which is defined by reduced dynamic stiffness matrix. Special attention is focused on the condition number of a characteristic matrix used in the solution algorithm of this reverse process. Simple example is presented in support of the ill-condition of a reverse process.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.2
• /
• pp.51-56
• /
• 2015

Objective : We analyzed present condition of cooperative medical care using claims data of HEALTH INSURANCE REVIEW & ASSESSMENT SERVICE form patients treated by Korean-Western cooperative medicine. The study aimed to offer guidelines in selecting disease-related research in developing Korean-Western convergence technology. Method : Based on the patients using Korean medical service, we analyzed claims data of patients using Korean medical service and western medical service from January 2012 to December 2013. We were assigned to the server remotely. With the concept of 'episode of care', we rebuilt claims data and analyzed present condition of cooperative medical usage. Results : We analyzed present condition of cooperative medical care per episode of care. Among outpatients, Low back pain, lumbar region(M5456) was the highest number. Among inpatients, Sciatica due to intervertebral disc disorder(M511) was the highest number. Conclusion : Based on the claims data provided by HEALTH INSURANCE REVIEW & ASSESSMENT SERVICE, we have derived a list of multy frequently disease frequently treated by cooperative medical care by analyzing present condition.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.2
• /
• pp.179-186
• /
• 2007

The decrease of masticatory function caused by tooth loss leads to a decrease of cerebral blood flow volume resulting in impairment of cognitive function and learning memory disorder. However, the reduced mastication-mediated morphological alteration in the central nervous system (CNS) responsible for senile deficit of cognition, learning and memory has not been well documented. In this study, the effect of the loss of the molar teeth (molarless condition) on the hippocampal expression of glial fibrillary acidic protein (GFAP) protein was studied by immunohistochemical techniques. The results were as follows : 1. The molarless mice showed a lower density of pyramidal cells in the cornu ammonis 1 (CA1) and dentate gyrus (DG) region of the hippocampus than control mice. 2. Immunohistochemical analysis showed that the molarless condition enhanced the time-dependent increase in the cell density and hypertrophy of GFAP immunoreactivity in the CA1 region of the hippocampus. The molarless condition enhanced an time-dependent decrease in the number of neurons in the hippocampal formation and the time-dependent increase in the number and hypertrophy of GFAP-labeled cells in the same region. The data suggest a possible link between reduced mastication and histological changes in hippocampal formation that may be one risk factor for senile impairment of cognitive function and spatial learning memory.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.32-37
• /
• 2014

In this study, the optimum design process of an indoor package air-conditioner (PAC) was implemented by Taguchi method. The goal of this study is to obtain the best set condition of each control factor composing of an indoor PAC. The number of revolution of a double inlet sirocco fan installed in an indoor PAC was measured by the orthogonal array of $L_{18}(2^3{\times}3^4)$ and analysed by using the-smaller- the-better characteristic among the static characteristic analyses. As a result, the optimum condition of an indoor PAC was found as a set of when the cost of production, assembling and working conditions were considered. Moreover, the number of revolution of a double-inlet sirocco fan used for an optimum condition was reduced about 8.5% more than that of a standard condition for the target flowrate of $18.5m^3/min$.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.36-36
• /
• 2018

Soybean is the important crop in Asian countries as protein source, oil production and animal feed. Improving soybean using genetic transformation is the principal tool in nowadays. Developing herbicide resistant transgenic soybean plants through Agrobacterium-mediated transformation has been worked in many previous studied. However, the transformation efficiency is still low. Many attempts try to find the optimum media condition for plant regeneration after infection. After transformation, the plant regeneration is very important condition to promote growth of transgenic plant. In this study, we optimized a regeneration condition for two Korean soybean cultivar, Dawonkong and Pungsannamulkong using cotyledon, cotyledonary nodes and hypocotyl as explant. The results showed that shoot regeneration of cotyledonary nodes on B5 medium containing 2 mg/L 6-benzylaminopurine showed the highest percentage of regeneration in Dawonkong (75.8%) while Pungsannamulkong presented high number of shoots 2.12 shoots per explant. For transformation condition, co-cultivation in 7 days showed a high number of GUS positive expression. Most of explants can survived under media including 5 mg/L of glufocinate which refers phosphinotricin for 2-week selection. Washing with 400 mg/L of cefotaxime in several times and selection in plant regeneration media with 400 mg/L of cefotaxime can prevent bacteria growth, effectively.

• Journal of the Chungcheong Mathematical Society
• /
• v.22 no.2
• /
• pp.229-234
• /
• 2009

Let f : $X{\rightarrow}X$ be a self-map of a connected finite polyhedron X. In this short note, we say that the mod H Nielsen number $N_H(f)$ is well-defined without the algebraic condition $ f_{\pi}(H)\;{\subseteq}H$ and that $N_H(f)$ is the same as the q-Nielsen number $N_q(f)$ in any case.