• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.2
• /
• pp.95-100
• /
• 1999

Hydrocarbon compounds in vadose zone soils caused by adsorption onto the surfaces of solid particles are generally considered to show retardation effect. In this study, we investigated the retardation effect on the transport of Benzene in a sandy soil by conducting batch and column tests. The batch test was conducted by equilibrating dry soil mass with Benzene solutions of various initial concentrations. and by analyzing the concentrations of Benzene in initial and equilibrated solutions using HPLC. The column test consisted of monitoring the concentrations of effluent versus time known as a breakthrough curve (BTC). We used KCl and Benzene solutions with the concentration of 10 g/L and 0.88 g/L as a tracer, and injected them into the inlet boundary of the soil sample as a square pulse type respectively, and monitored the effluent concentrations at the exit boundary under a steady state condition using an EC-meter and HPLC. From the batch test, we obtained a distribution coefficient assuming that a linear adsorption isotherm exists and calculated the retardation factor based on the bulk density and porosity of the column sample. We also predicted the column BTC curve using the retardation factor obtained from the distribution coefficient and compared with the measured BTC of Benzene. The results of the column test showed that i) the peak concentration of Benzene was much smaller than that of KCl and ⅱ) the travel times of peak concentrations for the two tracers were more or less identical. These results indicate that adsorption of Benzene onto the sand panicles occurred during the pulse propagation but the retardation of Benzene caused by adsorption was not present in the studied soil. Comparison of the predicted with the measured BTC of Benzene resulted in a poor agreement due to the absence of the retardation phenomenon. The only way to describe the absolute decrease of Benzene concentration in the column leaching experiment was to introduce a decay or sink coefficient in the convection-dispersion equation (CDE) model to account for an irreversible sorption of Benzene in the aqueous phase.

• 보존과학연구
• /
• s.21
• /
• pp.5-55
• /
• 2000

The cultural properties are damaged by various causes according to the characteristics of material, the condition of preservation, and the period of time. Especially, biodeterioration makes lots of damages in organic properties than inorganic ones. The damages of wooden cultural properties by insects usually are caused by the three orders; Isoptera, Coleoptera, and Hymenoptera. As the result of investigation on the state of 141 buildings of wooden cultural properties in 1999, some of them were damaged by many kinds off actors; wasp, powder post beetle, cigarette beetle, termite, decay, and physical cracking. And it was found that the patterns of damages were related to species-specific habits of insects. There are several methods of pest control for the prevention of wooden cultural properties from damages caused by insects. Those are as follows; physical control, chemical control, biological control, and integrated pest management. When insects and fungi were detected at the wooden buildings, the fumigation is best treatment to stop biodeterioration. And then, wood materials also need to be treated with insecticidal and antiseptic chemicals to avoid a reinfestation, because the fumigant is volatile. The six commercial chemicals which are applied to the insecticidal and antiseptic treatment of wooden cultural properties were purchased to test their abilities. According to the comparative results of efficacy of them in laboratory, chemical D showed excellent efficacy in all items, including antiseptic and termiticidal items. The goal of these pest controls is to protect wooden buildings from insects and microorganisms. The most effective method used currently is chemical control(fumigation, insecticidal and anticeptic chemical treatment), but it has to be treated periodically to control pest effectively. Recently environmentally-friendly control methods such as bait system or biological treatments are replacing traditional barrier treatments using large amounts of chemicals. Especially, termite is a social insect which makes a colony. Although a building with fumigation treatment is safe for a while, once attacked building has a risk of damage by reinfestation of termite. Therefore, to control termites from damaged building, the entire colony including reproductives(queen and king) and larvae around buildings must beeliminated. Bait system can be used as a preventive measure in early detection of them through termites colony monitoring and baiting. It would be the most effective for termite control if bait system would be used together with the chemical controls.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.367-373
• /
• 2017

Pressurized membrane module systems, including hollow fiber type of Microfiltration (MF) and Ultrafiltration (UF) membranes are being increasingly used in drinking water treatment due to their high removal efficiency of pathogen. However, when fibers are damaged in pressurized membrane system, the pathogen will be able to penetrate the membrane. Therefore, it is essential to guarantee the regulatory requirements for water quality by an effective on-line or off-line condition integrity monitoring methods. Recently, pressure decay test (PDT) which is one of membrane integrity tests has been reflected to drinking water treatment plants using pressurized membrane module. In this paper, three different method were used to perform PDT and three different sensitivity values were analyzed through experiments. Three types of direct integrity test methods were applied to pressure feed side, filtrate side and bidirectional pressure decay test. The results of these experiments show that the sensitivity was increasing when the volume of pressurized gas was decreasing. The sensitivity is inversely proportional to the gas volume. Furthermore, it is desirable to increase pressure difference between feed side and permeate side in order to achieve higher sensitivity in the PDT by membrane damage.

• Korean Journal of Environment and Ecology
• /
• v.34 no.4
• /
• pp.282-293
• /
• 2020

This study investigated a long-term variation trend of water quality, fish compositions, and ecological health conditions in the Gwanpyeong stream located in the nearby Daejeon metropolitan city to understand the impact of urban development projects on the aquatic ecosystem. The sampling was made in four surveys (2009, 2010, 2016, 2019) before and after urbanization. The urban development was conducted in 2008, resulting in the stream's ecological disturbance, and the stream restoration was conducted in 2012. Thus, stream monitoring was conducted to analyze the ecological trends before and after the restoration. The multi-metric models for Fish Assessment Index(FAI) and necropsy-based Health Assessment Index(HAI) were applied in the fish community and organ-level, respectively, to assess the ecological health of the stream. Minimum turbidity and chlorophyll-a(Chl-a) occurred in the mid-stream(St. 2), and this was probably due to rapid current velocity in the riffle zone. We collected 18 fish species, and the dominant species was Zacco platypus (40.6%). In 2016 immediately after the stream restoration, the relative proportions of sensitive species and insectivore species were the highest along with highest values in the species diversity and species richness index, resulting in the best condition in the ecological health, based on FAI model values. However, the ecological health, based on the FAI, became worse in the latest survey conducted in 2019. The analysis of the HAI model based on the organ-level approach showed skin erosion in the fish of upper stream, kidney defects in downstream, and the liver and gill defects observed in all sites, indicating that the anatomical health was also affected.

• Journal of Environmental Science International
• /
• v.17 no.9
• /
• pp.1053-1068
• /
• 2008

This study aims to produce fundamental database for Environment Impact Assessment by monitoring vertical structure of the atmosphere due to the mountain valley wind in spring season. For this, we observed surface and upper meteorological elements in Sangin-dong, Daegu using the rawinsonde and automatic weather system(AWS). In Sangin-dong, the weather condition was largely affected by mountains when compared to city center. The air temperature was low during the night time and day break, and similar to that of city center during the day time. Relative humidity also showed similar trend; high during the night time and day break and similar to that of city center during the day time. Solar radiation was higher than the city, and the daily maximum temperature was observed later than the city. The synoptic wind during the measurement period was west wind. But during the day time, the west wind was joined by the prevailing wind to become stronger than the night time. During the night time and daybreak, the impact of mountain wind lowered the overall temperature, showing strong geographical influence. The vertical structure of the atmosphere in Dalbi valley, Sangin-dong had a sharp change in air temperature, relative humidity, potential temperature and equivalent potential temperature when measured at the upper part of the mixing layer height. The mixing depth was formed at maximum 1896m above the ground, and in the night time, the inversion layer was formed by radiational cooling and cold mountain wind.

• Tuberculosis and Respiratory Diseases
• /
• v.68 no.5
• /
• pp.259-266
• /
• 2010

Background: Pulmonary tuberculosis (TB), requiring the intensive care unit (ICU) care, has been a high-mortality condition until now. In the present study, we aimed to investigate clinical features and parameters associated with TB mortality. Methods: From August 2003 to December 2008, patients with microbiologically or histologically confirmed pulmonary TB then admitted to the ICU, were retrospectively enrolled into the study. Upon enrollment, their medical records were reviewed. Results: Forty three patients (30 males, 13 females) were included and their mean age was 63.8 years (range: 17~87 years). Twelve patients died, an overall in-hospital mortality of 27.8%. The main reason for the ICU care was dyspnea or hypoxemia requiring mechanical ventilation (n=17). Other diagnoses for ICU care were hemoptysis, monitoring after procedures, neurologic dysfunction, shock, and gastrointestinal bleeding. On univariate analysis, the factors affecting the mortality were malnutrition-related parameters including low body mass index, hypoalbuminemia, lymphocytopenia, and hypocholersterolemia, as well as severity-related variables such as high acute physiology and chronic health evaluation (APACHE) score, number of involved lobes, and high C-reactive protein. In addition, respiratory failure requiring mechanical ventilation and acute respiratory distress syndrome contributed to patient fatality. It was shown on multivariate analysis that respiratory failure and hypoalbuminemia were significantly independent variables associated with the mortality. Conclusion: Acute respiratory failure is the most common reason for the ICU care and also the most important factor in predicting poor outcome. In addition, our data suggest that the parameters associated with malnutrition could be possible factors contributing to mortality.

• Smart Structures and Systems
• /
• v.10 no.2
• /
• pp.131-154
• /
• 2012

In this paper, it is aimed to determine the seismic behaviour of highway bridges by nondestructive testing using ambient vibration measurements. Eynel Highway Bridge which has arch type structural system with a total length of 216 m and located in the Ayvaclk county of Samsun, Turkey is selected as an application. The bridge connects the villages which are separated with Suat U$\breve{g}$urlu Dam Lake. A three dimensional finite element model is first established for a highway bridge using project drawings and an analytical modal analysis is then performed to generate natural frequencies and mode shapes in the three orthogonal directions. The ambient vibration measurements are carried out on the bridge deck under natural excitation such as traffic, human walking and wind loads using Operational Modal Analysis. Sensitive seismic accelerometers are used to collect signals obtained from the experimental tests. To obtain experimental dynamic characteristics, two output-only system identification techniques are employed namely, Enhanced Frequency Domain Decomposition technique in the frequency domain and Stochastic Subspace Identification technique in time domain. Analytical and experimental dynamic characteristic are compared with each other and finite element model of the bridge is updated by changing of boundary conditions to reduce the differences between the results. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of highway bridges. After finite element model updating, maximum differences between the natural frequencies are reduced averagely from 23% to 3%. The updated finite element model reflects the dynamic characteristics of the bridge better, and it can be used to predict the dynamic response under complex external forces. It is also helpful for further damage identification and health condition monitoring. Analytical model of the bridge before and after model updating is analyzed using 1992 Erzincan earthquake record to determine the seismic behaviour. It can be seen from the analysis results that displacements increase by the height of bridge columns and along to middle point of the deck and main arches. Bending moments have an increasing trend along to first and last 50 m and have a decreasing trend long to the middle of the main arches.

• The Journal of Society for e-Business Studies
• /
• v.23 no.2
• /
• pp.111-121
• /
• 2018

Many problems in rotating machinery such as aircraft engines, wind turbines and motors are caused by bearing defects. The abnormalities of the bearing can be detected by analyzing signal data such as vibration or noise, proper pre-processing through a few signal processing techniques is required to analyze their frequencies. In this paper, we introduce the condition monitoring method for diagnosing the failure of the rotating machines by analyzing the vibration signal of the bearing. From the collected signal data, the normal states are trained, and then normal or abnormal state data are classified based on the trained normal state. For preprocessing, a Hamming window is applied to eliminate leakage generated in this process, and the cepstrum analysis is performed to obtain the original signal of the signal data, called the formant. From the vibration data of the IMS bearing dataset, we have extracted 6 statistic indicators using the cepstral coefficients and showed that the application of the Mahalanobis distance classifier can monitor the bearing status and detect the failure in advance.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.64-70
• /
• 2011

Portable artificial electronic nose (E-nose) system suffers from noisy fluctuation in surroundings such as temperature, vapor concentration, and gas flow, because its measuring condition is not controled precisely as in the laboratory. It is important to develop a simple and robust vapor recognition technique applicable to this uncontrolled measurement, especially for the portable measuring and diagnostic system which are expanding its area with the improvements in micro bio sensor technology. This study used a PDA-based portable E-nose to collect the uncontrolled vapor measurement signals, and applied the image matching algorithm developed in the previous study on the measured signal to verify its robustness and improved accuracy in portable vapor recognition. The results showed not only its consistent performance under noisy fluctuation in the portable measurement signal, but also an advanced recognition accuracy for 2 similar vapor species which have been hard to discriminate with the conventional maximum sensitivity feature extraction method. The proposed method can be easily applied to the data processing of the ubiquitous sensor network (USN) which are usually exposed to various operating conditions. Furthermore, it will greatly help to realize portable medical diagnostic and environment monitoring system with its robust performance and high accuracy.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.506-512
• /
• 2006

Gastrodia elata Blume (GEB) is a traditional herbal plant that has been used in Asian countries for centuries as an anticonvulsant analgesic, and a sedative for treating general paralysis, epilepsy, vertigo, and tetanus. This study was designed to optimize conditions for ethanol extracts or GEB by analyzing and monitoring the extraction characteristics with response surface methodology. The extract was used for analysis of the effective components of GEB. The estimated optimal conditions were 63.62% in ethanol of 5.06 mL/g in solvent per sample, and 6.25 hr in extract time. The optimal extraction conditions for $ \gamma-aminobutyric$ acid, were 45.52%, 5.67 mL/g, and 6.04 hr, while those for $\rho-hydroxybenzyl$ alcohol were 62.73%, 5.02 mL/g, and 5.95 hr. Regression equation was generated for each variables and then superimposed them, such as soluble solid, $ \gamma-aminobutyric$ acid and $\rho-hydroxybenzyl$ alcohol content thereby resulting in superimposed values of extinction conditions like $45\sim65%,\;5\sim7mL/g$ and $5\sim7$ hr, respectively.