• 대한금속재료학회지
• /
• 제46권7호
• /
• pp.427-436
• /
• 2008

The effect of dewpoints on annealing behavior and coating characteristics such as wettability and galvannealing kinetics was studied by annealing 0.3wt%Si - 0.1~0.4wt% Mn added interstitial-free high strength steels(IF-HSS). The 0.3wt%Si-0.1wt%Mn steel exhibited good wettability with molten zinc and galvannealing kinetics after annealing when the dewpoint of $H_2-N_2$ mixed gas was above $-20^{\circ}C$. It is shown that the wettability and galvannealing kinetics are directly related to the coverage of the external(surface) oxide formed by selective oxidation during annealing. At $N_2-15%H_2$ annealing atmosphere, the increase of dewpoint results in a gradual transition from external to internal selective oxidation. The decrease of external oxidation of alloying elements with a concurrent increase of their subsurface enrichment in the substrate, showing a larger surface area that was free of oxide particles, contributed to the improved wettability and galvannealing kinetics. On the other hand, the corresponding wettability and galvannealing kinetics were deteriorated with the dewpoints below $-20^{\circ}C$. The continuous oxide layer of network and/or film type was formed on the steel surface, leading to the poor wettability and galvannealing kinetics. It causes a high contact angle between annealed surface and molten zinc and plays an interrupting role in interdiffusion of Zn and Fe during galvannealing process.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2021년도 제64차 하계학술대회논문집 29권2호
• /
• pp.305-307
• /
• 2021

Alzheimer's Disease (AD) is a cognitive disorder characterized by memory impairment that can be assessed at early stages based on administering clinical tests. However, the AD pathophysiological mechanism is still poorly understood due to the difficulty of distinguishing different levels of AD severity, even using a variety of brain modalities. Therefore, in this study, we present a hybrid EEG-fNIRS modalities to compensate for each other's weaknesses with the help of Machine Learning (ML) techniques for classifying four subject groups, including healthy controls (HC) and three distinguishable groups of AD levels. A concurrent EEF-fNIRS setup was used to record the data from 41 subjects during Oddball and 1-back tasks. We employed both a traditional neural network (NN) and a CNN-LSTM hybrid model for fNIRS and EEG, respectively. The final prediction was then obtained by using majority voting of those models. Classification results indicated that the hybrid EEG-fNIRS feature set achieved a higher accuracy (71.4%) by combining their complementary properties, compared to using EEG (67.9%) or fNIRS alone (68.9%). These findings demonstrate the potential of an EEG-fNIRS hybridization technique coupled with ML-based approaches for further AD studies.

• 한국건축시공학회지
• /
• 제23권5호
• /
• pp.595-605
• /
• 2023

모듈러 건축 사례가 많아지면서 모듈러 건축에 관한 관심이 높아지고 적용 대상 범위가 확대되고 있다. 모듈러 건축의 장점 중 하나는 공장제작을 통한 우수한 품질의 건축물을 안정적으로 공급할 수 있는 것이다. 이를 위해, 현장 양중 및 설치 단계까지 품질관리를 위한 노력과 방법 적용이 필수적이다. 본 연구는 현재 현장 양중 및 설치 단계에서 품질유지 및 관리에 적용하고 있는 방안들의 중요도와 예방효과를 프로젝트 참여자들을 대상으로 설문조사를 실시하고, 이를 IPA 방법으로 분석하였다. 그 결과, 대부분의 품질 유지 및 관리 방법이 잘 적용되고 있으나, 프로젝트 참여자들간 일부 항목들에 대한 인식 차이가 있음을 확인하였고, 이에 대한 개선방안을 제시하였다. 본 연구 결과는 추후 프로제트 참여자들의 현장설치단계 품질관리 인식개선을 위한 연구에 활용할 수 있다.

• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.495-513
• /
• 2022

This paper aims to study the fracture mechanism of rocks under the 'u'shape cutters considering the effects of crack (pre-existing crack) distances, crack spacing and crack inclination angles. The effects of loading rates on the rock fragmentation underneath these cutters have been also studied. For this purpose, nine experimental samples with dimensions of 5 cm×10 cm×10 cm consisting of the non-persistent cracks were prepared. The first three specimens' sets had one non-persistent crack (pre-existing crack) with a length of 2 cm and angularity of 0°, 45°, and 90°. The spacing between the crack and the "u" shape cutter was 2 cm. The second three specimens" set had one non-persistent crack with a length of 2 cm and angularity of 0°, 45°, and 90° but the spacing between pre-existing crack and the "u" shape cutter was 4 cm. The third three specimens'set has two non-persistent cracks with lengths of 2 cm and angularity of 0°, 45° and 90°. The spacing between the upper crack and the "u" shape cutter was 2 cm and the spacing between the lower crack and the upper crack was 2 cm. The samples were tested under a loading rate of 0.005 mm/s. concurrent with the experimental investigation. The numerical simulations were performed on the modeled samples with non-persistent cracks using PFC2D. These models were tested under three different loading rates of 0.005 mm/s, 0.01 mm/sec and 0.02 mm/sec. These results show that the crack number, crack spacing, crack angularity, and loading rate has important effects on the crack growth mechanism in the rocks underneath the "u" shape cutters. In addition, the failure modes and the fracture patterns in the experimental tests and numerical simulations are similar to one another showing the validity and accuracy of the current study.

• 한국건설관리학회논문집
• /
• 제16권4호
• /
• pp.118-128
• /
• 2015

BIM 기술은 현재 빠르게 건설 산업 전반에 적용 및 확산되고 있다. 그러나 고비용의 BIM 인프라, 법령의 부재, 운영 프로세스 등의 문제로 도입 초기의 기대와 달리 그 활용도면에서 만족할 만한 기대치를 채우지 못하고 있다. 설계 단계에서 수행되는 BIM 기술 기반의 협업 설계 인프라 구축은 성공적인 건설 프로젝트를 위한 필수 요소로 볼 수 있다. 현재 BIM은 클라우드 컴퓨팅기술과 결합하여 드로잉, 3D 모델링, 객체 데이터, 속성 정보 등을 생성할 수 있는 서비스 들이 파생되고 있으며 설계 인프라를 위한 핵심으로 떠오르고 있다. 본 논문은 VDI 시스템 환경 설정 및 구축을 통해 BIM 모델링, Viewing, 모델 체크, 마크업 등 BIM을 수행할 수 있는 서버 인프라 서비스 구축 방안을 제시한다. VDI 성능 시스템 테스트를 통하여 BIM 설계 환경에 필요한 가상 머신 리소스를 산정하고 배분하는 방식을 제안하여 클라우드 컴퓨팅 기반 BIM 설계 및 BIM 설계정보를 활용 프로젝트 운영 방향을 제시하고자 한다.

• Structural Engineering and Mechanics
• /
• 제81권2호
• /
• pp.243-258
• /
• 2022

In this paper, tensile behavior of joint filling has been investigated under experimental test and numerical simulation (particle flow code). Two concrete slabs containing semi cylinder hole were prepared. These slabs were attached to each other by glue and one cubic specimen with dimension of 19 cm×15 cm×6 cm was prepared. This sample placed in the universal testing machine where the direct tensile stress can be applied to this specimen by implementing a special type of load transferring device which converts the applied compressive load to that of the tensile during the test. In the present work, two different joint filling thickness i.e., 3 mm and 6 mm were prepared and tested in the laboratory to measure their direct tensile strengths. Concurrent with experimental test, numerical simulation was performed to investigate the effect of hole diameter, length of edge notch, filling thickness and filling length on the tensile behavior of joint filling. Model dimension was 19 cm×15 cm. hole diameter was change in four different values of 2.5 cm, 5 cm, 7.5 cm and 10 cm. glue lengths were different based on the hole diameter, i.e., 12.5 cm for hole diameter of 2.5 cm, 10 cm for hole diameter of 5 cm, 7.5 cm for hole diameter of 7.5 cm and 5 cm for hole diameter of 10 cm. length of edge notch were changed in three different value i.e., 10%, 30% and 50% of glue length. Filling thickness were changed in three different value of 3 mm, 6 mm and 9 mm. Tensile strengths of glue and concrete were 2.37 MPa and 6.4 MPa, respectively. The load was applied at a constant rate of 1 kg/s. Results shows that hole diameter, length of edge notch, filling thickness and filling length have important effect on the tensile behavior of joint filling. In fixed glue thinks and fixed joint length, the tensile strength was decreased by increasing the hole diameter. Comparing the results showed that the strength, failure mechanism and fracture patterns obtained numerically and experimentally were similar for both cases.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.1-6
• /
• 2000

As dies and molds have become more and more complicated in the recent years, the demand for lower cost and shorter production time is also growing stronger. Rapid prototyping and Tooling technologies are expected to be used for more rapid and lower cost tool fabrication. However the rapid tooling methods have not yet reached the level of application to the manufacturing of metallic dies and molds which require high dimensional accuracy. As the rapid tooling technology, there are the slurry casting, the powder casting, the direct laser sintering, and so on. Generally, in the slurry casting, the alumina powder and the water soluble phenol were mainly used. However, the mechanical properties of the phenol were not good enough to apply to molds directly. In this study, pure epoxy and two types of aluminium powder reinforced resin are applied to the slurry casting. The mechanical and thermal properties are better than phenol because the epoxy is the thermosetting resin. And mechanical characteristics such as shrinkage rate, hardness, surface roughness are measured for the sake of comparison. Metal powder reinforced resin molds are better than the resin tool form the viewpoint of shrinkage rate and hardness. Finally, it has been shown that the application possibility of this process is high, because the manufacturing time and cost savings are significant.

• 디자인학연구
• /
• 제13권3호
• /
• pp.253-260
• /
• 2000

필기구는 그 구조와 사용특성상 여타 제품과는 다른 특징을 많이 띠는 제품이다. 즉, 다양한 종류의 필기구라 할지라도 대체로 공통적인 구조나 부품으로 구성된 경우가 많다. 또한 제품 전체가 항상 손에 잡혀져 필기가 이루어진다는 점에서 인체공학적인 디자인이 필수적인 제품이다. 소비자들이 필기구를 고르는 데 있어 가장 중요하게 여기는 요소가 필기감이라는 것을 감안하면, 스타일링 위주의 디자인을 행하기 보다 필기감 향상에 영향을 주는 요소 중에서도 디자인이 기여할 수 있는 인간공학적인 개선이 매우 유효한 개선 방법이 된다고 할 수 있다. 현재까지도 인간과 일의 이해를 바탕으로한 인간공학 (Ergonomics)적 접근이나 필기구를 쥐었을 때의 편안함 등에 대한 문제해결은 부족한 면이 적지 않으며, 인간과 일의 관계에 의해 인간사회는 유지되며 독특한 문화를 형성한다는 근본적인 인식을 바탕으로 필기구 디자인은 문화적인 차원에서의 인간공학적 접근을 시도해야 한다. 이에 본 연구에서는 다양한 필기구의 인간공학적 디자인 크라이테리어를 재정립하고, 실제 실험을 통하여 필기구가 가져야하는 기본적인 제원에 대하여 정리하여 향후 필기구 개발에 기초자료로 쓰기 위한 시도를 하였다. 이러한 연구는 필기구 개발의 통합적 전개, 즉 동시공학적 개발을 위한 기초자료로서 나 각 부품별 모듈 시스템을 통한 모델 다각화 전략의 초석이 되는 데이터베이스 개발에도 효과적으로 응용될 수 있다.

• 한국건축시공학회지
• /
• 제10권4호
• /
• pp.31-39
• /
• 2010

선형 공정계획 방법은 1929년 엠파이어 스테이트 빌딩에서 그래픽한 용도로 사용되면서 현재는 다양한 작업 공간, 현장 작업과 조립 작업에 적용되고 있다. 선형 공정계획 상에 동시적인 크리티칼 패스가 발생하면 자원 관리는 작업흐름의 최적화 문제로 연결되어 유연한 작업생산성과 지속적인 자원의 할당을 하기 위해 적용되고 있다. 그러나 선형 공정계획 모델 연구에서 간과하고 있는 선형 공정계획 모델의 작업 관계성을 고려하는 것이 필요하다. 이에 본 연구는 선형 공정계획 모델에 관한 기존 연구를 분석하여 네트워크 공정표의 관계성을 선형 공정표에 적용할 수 있는 방법을 제시한다. 네트워크 공정표를 선형공정표로 변환 시에 발생하는 작업의 관계성을 고찰하고 건축물의 물리적 층수 변화와 같이 작업공간의 변화에 따라 선형 공정표에 반영되어야 할 선형 공정표상의 액티비티의 이동 문제를 고찰하여 네트워크 공정표를 선형 공정표로 호환할 수 있는 시스템 개발을 위한 기초연구를 제공하는 것이 본 연구의 목적이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.166-171
• /
• 2004

Since early 1950's fracture mechanics has brought significant impact on structural integrity assessment in a wide range of industries such as power, transportation, civil and petrochemical industries, especially in nuclear power plant industries. For the last two decades, significant efforts have been devoted in developing defect assessment procedures, from which various fitness-for-purpose or fitness-for-service codes have been developed. From another aspect, recent advances in IT (Information Technologies) bring rapid changes in various engineering fields. IT enables people to share information through network and thus provides concurrent working environment without limitations of working places. For this reason, a network system based on internet or intranet bas been appeared in various fields of business. Evaluating the integrity of structures is one of the most critical issues in nuclear industry. In order to evaluate the integrity of structures, a complicated and collaborative procedure is required including regular in-service inspection, fracture mechanics analysis, etc. And thus, experts in different fields have to cooperate to resolve the integrity problem. In this paper, an internet-based cooperative system for integrity evaluation system which adapts IT into a structural integrity evaluation procedure for reactor pressure vessel is introduced. The proposed system uses Virtual Reality (VR) technique, Virtual Network Computing (VNC) and agent programs. This system is able to support 3-dimensional virtual reality environment and to provide experts to cooperate by accessing related data through internet.