• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1989년도 가을 학술발표회 논문집
• /
• pp.35-38
• /
• 1989

The purpose of this report is to investigate and analyze development and achievement of flowing and high-strength concrete by reacy mixed concrete companies in Korea. For this purpose, the investigation was divided into three parts, i.e., superplasticizers, flowing concrete, high-strength concrete. And, they were asked to quality control manager in ready mixed concrete companies. Many researches have been carried out. And, flowing concrete is applied to field in a few case. In order to improve practical applicability of high-strength concrete and make concrete strength higher, to begin with, profound research for concrete ingredients will be needed along with presentation of methods for obtaining workability and quality assurance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.459-462
• /
• 2005

Recently, interest grew on the quality of aggregates following the diminution of primary resources from river and the growing construction demand which exhausted high-quality sand sources around large cities and incited the use of low grade aggregates like shore sand and sea sand that can be supplied in natural state. Moreover, the most sensitive aspect highlighted by the unstability of aggregate supply is the quality. The extreme insufficiency of quality criteria about the materials currently used as substitute aggregates and about concrete mixed with such materials is also critical. This study investigated influence of qualities of concrete which is using mixed crushed sand and natural sand

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.43-44
• /
• 2016

Recently there have been media reports of some domestic FA refinement factories that omit the refinement process and ship raw material directly, for production time and cost reduction purposes, resulting in a negative effect on concrete quality. Accordingly, it's expected to have a negative effect on concrete quality. So this study seeks to clarify the impact that FA quality has on concrete's engineering characteristics, using various FA from refined FA being circulated in the nation to reject ash discarded during the refinement process. The results showed that when FA is used, liquidity is enhanced than when only OPC is used in the combination, and when refined FA is used air quantity and intensity increases as well.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.102-107
• /
• 2005

All concrete structure in agricultural improvement project must satisfied durability, serviceability, safety. It is important for structure that satisfied these natures to good quality at design and construction step, and must continuous maintenance. Most of the concrete structures is construct at winter season, is contacted with water, has various type and sporadic in wide area. The objective of this study is to make the Concrete-Quality-Control diagram for agricultural infrastructure project using GIS. And, analyze the diagram with external factor(terrain, stream, economic etc.) to know the factor of concrete quality control.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.983-986
• /
• 2007

콘크리트 표면절삭 작업은 콘크리트 표면의 평탄성 및 부착성을 필요로 하는 공사에서 빈번히 사용되고 있으나 작업형태가 노동집약적이며, 유해한 작업환경을 보유하고 있다. 또한 장비를 다루는 기능공의 숙련도에 따라 생산성 및 절삭품질의 편차가 큰 경향이 있다. 그러므로 주변 환경오염 방지와 장비 조종자가 위험에 노출되지 않도록 하기 위한 원격조종 콘크리트 표면절삭 장비 개발이 요구된다. 그러나 원격 조종 시스템에서 조종자가 절삭면의 품질을 측정하기 난해하고 품질에 대한 객관적인 판단을 내리기가 어려우므로, 본 연구에서는 머신비젼시스템(Machine Vision System)을 적용하여 네트워크 카메라로 촬영한 절삭면의 이미지를 디지털 영상처리(Image Processing)과정을 거쳐 그 결과를 그래픽 MMI(Man-Machine Interface) 프로그램에 표현함으로써 품질관리 시스템을 구축하였다. 머신비전 알고리즘은 콘크리트 절삭면의 디지털 영상처리 알고리즘을 의미하며 본 논문에서 제안된 알고리즘을 적용하여 콘크리트 절삭면의 객관적인 품질관리 기준을 제시하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.703-706
• /
• 1998

Primarily, to evaluate the structural condition assessment of concrete structures, percentile strength of concrete in concrete structures should be found out. This study aims to establish the evaluation techniques for concrete strength in existing concrete structures considering the concrete quality and reliability. The results are as follows ; 1. Percentile strength of concrete in concrete structures can be estimated from following strength equation. $$f_p=f_{mea} - {\lambda}_pS_s$$2. For the calibration of above percentile strength equation with proposed codes or specifications, following sample size based on ASTM E122 can be applied.

• 콘크리트학회논문집
• /
• 제13권1호
• /
• pp.69-76
• /
• 2001

현장타설 경량기포콘크리트는 경량성, 단열성, 흡음성, 시공성, 경제성 등이 우수하여 온돌바닥의 단열용 또는 채움용으로 사용되고 있다. 그러나, 경량기포콘크리트의 품질확보를 위한 세부기술개발이 미흡하여, 현장에서의 품질관리방법을 정립할 필요가 있으며, 이를 위하여 경량기포콘크리트의 물리적 성질 및 상호관계에 대한 구명이 요구된다. 본 연구는 시멘트 중량의 40%를 플라이애시로 치환한 FA기포콘크리트를 온돌 채움용으로 사용할 경우의 품질관리 방안을 확립하기 위한 것으로서, 굳지 않은 경량기포콘크리트의 플로우, 기포슬러리 비중, 기포율 간의 상호관계 및 경화전 물성과 경화후 물성(겉보기 비중, 28일 압축강도) 간의 상호관계를 구명하였으며, 7일 압축강도를 이용하여 28일 압축강도를 조기에 추정하기 위한 관계식을 제시하고, 또한 현장타설용 기포콘크리트에 대한 KS 규격 개선안을 제시하였다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2011년도 정기 학술발표대회
• /
• pp.91-91
• /
• 2011

The quality of the surface layer in concrete structures plays an important role in the durability of the concrete. The concrete factory products are made as they improve the appearance of the surface and compressive strength in need. A common criterion to judge the quality of concrete products frequently seen in our daily life appears to be "beauty" in terms of consistent shaping. However, as for most concrete curb in such areas where a large amount of anti-freezing agents(NaCl) and ice and snow melting agents(CaCl2) are spread over roads to ensure road safety during the winter season, since deterioration advances from the surface, scaling is seen on the surface concrete due to deterioration which combined freezing damage and salt damage. Especially, In cold northern districts, the spreading amount of deicing salts increases by regulation of studded tire use, and the scaling of the concrete products, the various parts of concrete structures for roads is increasing in recent years. In this study, L-shape concrete curb were targeted, the permeable form method with the commercial permeable sheet was applied to it and the improvements of the quality were examined. By the permeable form method, surface layers got strengthened, which prevented permeation of the deterioration factor from the outside, and the scaling resistance of the upper surface where the permeable sheet was applied improved exceedingly. It will be expected by applying the permeable form method to various concrete products that frost resistance improves and scaling damage decreases.

• 한국건축시공학회지
• /
• 제4권2호
• /
• pp.113-118
• /
• 2004

This study is a basic experiment on quality management of the compression strength of high strength concrete, aiming. at quality management of high strength mass concrete by giving the temperature hysteresis of the mass test pieces to managerial test pieces. Different from ordinary concrete, high strength concrete generally shows the temperature high rising caused by hydration heat inside the concrete. It is known that, in mass concrete, thermal stress occurs due to the difference in temperature between the inside and the outside, which causes a significant difference in compression strength between structure beams and managerial test pieces. It is also reported that there is a large difference between the compression strength of cylindrical managerial test pieces of standard underwater curing and the strength of structure beam concrete. Thus, this study made concrete test pieces in an optimal mix ratio for each strength level, and also created thermal insulation curing box and managerial test pieces. Then it carried out comparative analysis in relation to core strength and suggested equipment and a technique that can control the strength of high strength concrete mass more conveniently and accurately.

• KIEAE Journal
• /
• 제9권1호
• /
• pp.91-97
• /
• 2009

In this thesis presents the application to the field of Hwangto-used concrete highlighted as an eco-friendly material and performs an experiment in the aspect of construction and quality on the construction for all parts of buildings, rather than for some parts of buildings as shown from existing application and got the conclusion as followings. 1) It was turned out that Hwangto concrete showed lower hydrated heat and arid contraction comparing to those of cement concrete. And this phenomenon is judged to appear high when applied to mass building and huge span structures. 2) The construction of Hwangto concrete is judged to be possible in applying to constructions since the mechanical construction seems to be possible by using pump car and ready-mixed concrete which are used at the practical sites at the moment. 3) The pockmarks appearing on the exposure surface were about 2% of total area. This has great cohesion by Hwangto concrete but is judged that it will be improved through enough vibration stamping. Through the experiments of quality and construction of Hwangto concrete as environment-friendly construction materials, it is possible to judge modernized application of Hwangto concrete. It is in need of more studies about economical efficiency, structural stability, design application, etc. afterwards.