• Structural Engineering and Mechanics
• /
• 제76권3호
• /
• pp.293-310
• /
• 2020

This study derives the differential equations of free vertical bending and torsional vibrations for two- and three-pylon suspension bridges using d'Alembert's principle. The respective algorithms for natural vibration frequency and vibration mode are established through the separation of variables. In the case of the three-pylon suspension bridge, the effect of the along-bridge bending vibration of the middle pylon on the vertical bending vibration of the entire bridge is considered. The impact of torsional vibration of the middle pylon about the vertical axis on the torsional vibration of the entire bridge is also analyzed in detail. The feasibility of the proposed method is verified by two engineering examples. A comparative analysis of the results obtained via the proposed and more intricate finite element methods confirmed the former feasibility. Finally, the middle pylon stiffness effect on the vibration frequency of the three-pylon suspension bridge is discussed. It is found that the vibration frequencies of the first- and third-order vertical bending and torsional modes both increase with the middle pylon stiffness. However, the increase amplitudes of third-order bending and torsional modes are relatively small with the middle pylon stiffness increase. Moreover, the second-order bending and torsional frequencies do not change with the middle pylon stiffness.

• 대한토목학회논문집
• /
• 제34권1호
• /
• pp.1-8
• /
• 2014

이 논문에서는 장경간 케이블 교량의 콘크리트 주탑에 대한 온도 측정과 분석을 다루고 있다. 부산거제연결도로의 거가대교의 시공 중에 주탑의 여러 단면에 온도센서가 설치되었으며 주탑 4면의 두께방향의 온도와 주탑 주위의 대기온도가 계측되었다. 1년간의 계측자료를 바탕으로 주탑 단면내의 온도분포가 분석되었으며 이 분석결과를 국내외의 온도분포에 대한 설계기준과 비교하였다. 그 결과 주탑 단면의 평균온도와 단면 내 온도분포는 콘크리트 거더의 평균온도와 수직온도분포의 기준을 적용할 수 있음을 확인하였다. 이러한 온도특성에 대한 주탑의 거동을 3차원 유한요소 모델링을 사용하여 해석하였으며 거가대교 주탑의 경우 온도에 의한 주탑 상부 최대변위는 동서, 남북 방향으로 각각 0.056m, 0.121m 인 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.355-358
• /
• 2005

In this paper, an actual behavior of the pylon of Seohae Grand Bridge which is a cable stayed bridge and has been constructed 4 years ago was analyzed by using data acquisition system. As a result, the pylon of cable stayed bridge behaved normally with respect to the change of temperature. The annual displacement of the top of pylon(PY1) ranged from -71.4mm to +181.7mm in the longitudinal direction of the bridge. In the case of the longitudinal displacement, the displacement of PY1 was bigger than that of PY2 because PY1 is movable and PY2 is fixed in terms of the constraint condition of super structure. For the long term, PY1 will be sloped gently to the direction of Dangjin and PY2 will be also sloped gently to the direction of Pyongtaek by the effect of creep and shrinkage in the case of the longitudinal direction. The result of structural analysis showed good agreement with the result mentioned above.

• Structural Engineering and Mechanics
• /
• 제51권6호
• /
• pp.909-922
• /
• 2014

In this paper, we present an alternative seismic design strategy for cable stayed bridges with concrete pylons when subjected to strong ground motions. The comparison of conventional seismic design using supplemental dampers (strategy A) and the new strategy using nonlinear seismic design of pylon columns (strategy B) is exemplified by one typical medium span cable stayed bridge subjected to strong ground motions from 1999 Taiwan Chi-Chi earthquake and 2008 China Wenchuan earthquake. We first conducted the optimization of damper parameters according to strategy A in response to the distinct features that strong ground motions contain. And then we adopted strategy B to carry out seismic analysis by introducing the elastic-plastic elements that allowing plasticity development in the pylon columns. The numerical results show that via strategy A, the earthquake induced structural responses can be kept in the desired range provided with the proper damping parameters, however, the extra cost of unusual dampers will be inevitable. For strategy B, the pylon columns may not remain elastic and certain plasticity developed, but the seismic responses of the foundation will be greatly decreased, meanwhile, the displacement at the top of pylon seems to be not affected much by the yielding of pylon columns, which indicates the pylon nonlinear design can be an alternative design strategy when strong ground motions have to be considered for the bridge.

• 콘크리트학회지
• /
• 제5권1호
• /
• pp.62-67
• /
• 1993

• 한국전산구조공학회논문집
• /
• 제25권2호
• /
• pp.155-162
• /
• 2012

최근의 토목분야의 프로젝트에 있어 장대교량의 건설이 주를 이루고 있으며, 장대교량의 여러 형식 가운데서도 사장교가 현재 계획, 설계 중인 프로젝트에서 상당한 비중을 차지하고 있다. 사장교가 대형화 및 장경간화 됨에 따라, 구조물의 경량화를 위하여 강재를 사용한 사장교가 건설되어 왔다. 그러나 많은 사례에서 주탑은 구조적, 경제적인 이유로 콘크리트로 시공되고 있다. 콘크리트는 재료적 특성상 크리프와 건조수축에 의한 장기거동의 영향을 크게 받는데, 이러한 특성으로 인하여 응력의 재분배와 시공 중 구조계의 변화 등 해석상 고려해야 할 부분이 많아진다. 본 연구에서는 철근콘크리트의 비선형성을 고려한 유한요소해석 프로그램 RCAHEST를 사용하여 콘크리트 주탑을 채택한 사장교 중에 국내 최장의 강사장교인 인천대교를 선택하여 해석을 수행하였다. 실제 시공된 교량의 시공단계해석과 완공 후 시간해석을 통하여 콘크리트 주탑만의 시간 의존적 효과가 사장교 전체계에 미치는 영향을 파악하였다.

• 한국BIM학회 논문집
• /
• 제4권3호
• /
• pp.1-9
• /
• 2014

As BIM application continues to increase in civil engineering, in this study, 3D information model for RC(Reinforced Concrete) bridge pylon was developed and verified its effectiveness at the structural-design stage. To define 3D information model of RC A-Type pylon, characteristics of pylon were analyzed and 3D model structure was constructed. The 3D information model, one of the core product of BIM, manages all information generated during all life-cycle of a structure and consequently maximizes the efficiency of utilizing information. Also, this study proposes interface module between input data in structural analysis and 3D model of RC pylon. The module can create the input data for non-linear structural analysis. It is essential to study on method of developing 3D information model and propose a structural analysis model by utilizing 3D model for the effective use of BIM techniques in construction industry. The results of this study can be used as the base data for developing the 3D information model of RC pylon in the structural analysis field.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.77-85
• /
• 2020

본 연구에서는 2주탑 콘크리트 사장교를 대상으로 경계조건에 따른 지진 취약도 곡선을 작성하고, 경계조건이 교량의 지진 취약도에 미치는 영향을 평가하고자 한다. 대상교량에 대한 해석모델이 Midas Civil을 사용하여 구축되었고 Fiber요소와 콘크리트, 철근의 재료모델을 적용하여 비선형 시간이력해석을 수행하였다. 주탑과 보강형 사이의 경계조건을 강결, 비구속, 포트받침, 면진받침의 총 4가지로 구분하여 각각의 경계조건에 대해 지진 취약도 곡선을 작성하였다. 주탑의 소성힌지구간과 연결부, 케이블을 취약부재로 선정하고 이 부재들에 대해 지진 취약도 곡선을 작성하였다. 분석결과 주탑의 소성힌지구간과 연결부에서는 면진받침모델이 가장 낮은 손상확률을 나타내고, 케이블의 지진 취약도는 경계조건에 의한 영향이 다른 부재에 비해 크지 않은 것을 알 수 있다.

• 소음진동
• /
• 제4권2호
• /
• pp.239-248
• /
• 1994

Wind tunnel tests and analyses of the response of the concrete pylon for the Seo Han Grand Bridge were conducted using aeroelastic model technique. A 1/250 scale aeroelastic model was used to measure the responses of the pylon at the several critical locations and to find any possible vibrational behavior. In order to confirm the model design and fabrication, natural frequencies and mode shapes measured from the model were compared with those from the calculation. Tests were conducted under the various angles ranging from $0^{\circ}$ to $90^{\circ}$ to find the critical angle of the wind. In order to evaluate the sensitivity of the response to changes in structural damping, a series of tests were conducted with two different values of structural damping such as 0.2% and 1.0% of critical. Additional tests were also conducted considering construction sequence.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.351-354
• /
• 2005

In this study ship collision risk analysis is performed to determine the design vessel for collision impact analysis of the maritime bridge. Method II which is a more complicated probability based analysis procedure is used to select the design vessel for collision impact. The AF allocation by weights seems to be more reasonable than the pylon concentration allocation method because this AF allocation takes the design parameter characteristics quantitatively into consideration although the pylon concentration allocation method brings more economical results when the overestimated design collision strength of piers compared to the strength of pylon is moderately modified.