• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.163-169
• /
• 2007

본 연구에서는 불포화 폴리에스터수지를 이용하여 적절한 투수성과 압축강도 및 내구성을 갖는 투수 콘크리트를 개발하고자 하였다. 투수 콘크리트 개발을 위해 사용된 재료로는 단입도 굵은골재와 결합재로서 불포화 폴리에스터수지 그리고 채움재로서 탄산칼슘을 이용하였다. 배합 방법은 굵은골재 최대치수, 결합재 비율, F/B 비율 등을 변화시키며 KS 규격에 준하여 각각의 배합에 따른 투수계수, 압축강도를 평가하였다. 그 결과, 투수계수는 약 $3.5{\times}10^{-1}cm/sec$, 공극률은 약 34%, 압축강도는 11 MPa로 나타나, 우수유출저감시설의 기준을 만족하는 것으로 나타났다.

• 한국도로학회논문집
• /
• 제4권1호
• /
• pp.161-170
• /
• 2002

본 연구는 폐폴리에틸렌필름(폐비닐)을 아스팔트 혼합물에 첨가하여 아스팔트 포장재료의 품질특성을 향상시키고 환경적으로 문제가 되고 있는 폐비닐을 재활용하기 위한 연구의 일환으로 수행되었다. 폐비닐 사용시 나타날 수 있는 포장체의 특성을 파악하기 위하여 국내에서 가장 많이 수거되는 LDPE 폐비닐을 사용하여 현장에서의 실용성을 고려한 건식혼합법으로 아스팔트 혼합물을 제조하였다. 제조한 혼합물에 대하여 마샬안정도 시험, 간접인장강도 시험, 반복주행시험 및 피로시험을 수행한 결과 폐비닐을 혼합한 혼합물이 일반혼합물에 비하여 인장강도가 향상되고 윤하중에 의한 소성변형 저항성 및 피로균열 저항에 크게 효과적인 것으로 나타났다.

• 한국콘텐츠학회논문지
• /
• 제22권10호
• /
• pp.225-238
• /
• 2022

본 연구의 목적은 중국에서 대표적인 지역 역사 박물관 심벌마크의 조형적 표현 특징과 규칙을 살펴보고 유형별 심벌마크에 대한 중국 소비자의 선호도를 연구하는데 있다. 먼저 중국 상위 100위 내 박물관 중 지역 역사 박물관 심벌마크의 조형적 표현 주제, 표현 유형, 표현 경향을 분석했다. 다음으로 주제와 표현 유형 간의 관계를 통해 디자인 규칙을 연구했다. 마지막으로 설문조사를 통해 주목성, 전달성, 친근성, 독창성, 심미성, 종합 선호도 등 6가지 측면에서 선호도를 분석했다. 연구 결과에 따르면 주제 측면에서 지역 역사 주제를 표현하는 경우가 가장 많았다. 표현 유형의 경우, 구상형과 한자의 형상화를 사용하는 심벌마크가 가장 많았다. 그리고 유형별 표현 내용과 특징을 살펴본 결과, 다음과 같이 몇 가지 특징을 도출할 수 있었다. 먼저, 구상형을 통해 지역 역사, 건축, 지역 자연 생태 환경 주제를 표현하는 경우가 많다. 그리고 추상형을 통해 이념을 표현하고 기하학적 도형을 통해 이념과 건축의 부분적 특징을 표현하였다. 문자, 구상형(건축, 지역 역사, 지역 자연 생태 환경 주제), 추상형(이념 주제) 세 가지 형식을 결합하고 혼합형인 문자의 형상화, 추상 및 문자 혼합형, 구상 및 추상 혼합형, 구상 및 추상 문자 혼합형으로 표현하였다. 조사 결과에 따르면 중국 관람객은 심벌마크 표현 유형에서 구상형, 표현 내용에서 지역 역사 주제에 대한 선호도가 가장 높은 것으로 나타났다.

• 한국농공학회논문집
• /
• 제47권6호
• /
• pp.27-34
• /
• 2005

The purpose of this study is to improve the durability performance of polymer modified cement composites for repair of concrete under combined aging conditions. The experimental procedure was divided into three parts. First, the replacement level of mineral admixtures in polymer modified cement composites were determined in an experimental study based on a Box Behnken design. Second, the flow value, compressive strength and chloride permeability test of sixteen types of mixtures were conducted. Test results show that the polymer modified cement composites were effected on the improvement of the compressive strength and permeability performance. Third, the effects on the replacement level of silica fume mixture was evaluated by the compressive strength, chloride permeability, chemical resistance and repeated freezing and thawing cycles test. They demonstrated that the polymer modified cement composites using mixture of silica fume, fly ash, and blast furnace slag improved the durability performance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.663-668
• /
• 2003

In this paper, an environmental factor and a durability resistance factor which adapts the concept of the Load Resistance Factor Design for safety design of RC structures is derived and a basic principle of a durability evaluation for RC structures using the factors is proposed. It is shown that durability of RC structures can be evaluated by comparing predicted value of chloride ion concentration with limit value of concentration for steel corrosion generation in reinforcement steel position and the durability of concrete manufactured for the RC structures can be also evaluated by comparing characteristic diffusion coefficient of concrete with predicted diffusion coefficient during mixture design.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.391-401
• /
• 2017

In this study, the effects of water-to-binder (W/B) ratio and replacement ratio of blast furnace slag (BFS) on the compressive strength of concrete were first investigated to determine an optimized mixture. Then, using the optimized high-strength concrete (HSC) mixture, hooked steel fibers with various aspect ratios and volume fractions were used as additives and the resulting mechanical properties under compression and flexure were evaluated. Test results indicated that replacement ratios of BFS from 50 to 60% were optimal in maximizing the compressive strength of steam-cured HSCs with various W/B ratios. The use of hooked steel fibers with the aspect ratio of 80 led to better mechanical performance under both compression and flexure than those with the aspect ratio of 65. By increasing the fiber aspect ratio from 65 to 80, the hooked steel fiber volume content could be reduced by 0.25% without any significant deterioration of energy absorption capacity. Lastly, complete material models of steel-fiber-reinforced HSCs were proposed for structural design from Lee's model and the RILEM TC 162-TDF recommendations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.938-943
• /
• 2003

The characteristics of lightweight cellular concrete has much influence on the compressive strength and flow from the design of mixture. This study is to investigate the characteristics of the compressive strength and flow for the mixture of lightweight cellular slurry. KS F 4039 was compared to the construction system and quality for lightweight cellular comcrete of floating floor. As the result of this study, the standard of the compression strength for target slurry have to lower and an upper limit of flow was judged to be 230mm

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.111-114
• /
• 2001

This study is a fundamental research for recycling waste vinyl in asphalt concrete mixture for roadway pavement. The mixing method and proper content of waste polyethylene(PE) film were determined through preliminary mix design. This study used 2-type aggregate gradations and two-type waste PE films. The mixtures were applied for a test pavement on a rural road. Quality evaluation of the asphalt concrete confirmed that waste vinyl asphalt concrete was applicable to road pavement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.215-216
• /
• 2012

The purpose of this study is to analyze the situation and feature of construction technology by analysis properties and the mixture proportion of a reinforced concrete building from the modern domestic and to leave technological records for the optimal maintenance of the cultural heritage. The study says, the case of the 1:3:6 mix concrete has been standard regardless of the kind of structures after the concrete has being used in earnest, However, The strength range is big from Water-Cement ratio difference according to the concrete casting site.

• 콘크리트학회지
• /
• 제20권2호
• /
• pp.25-36
• /
• 2008

Seismic design of reinforced concrete flat plate structures is often complicated as it deals with three dimensionality and continuous spans, and mostly material complexity and reinforcement variation. A great degree of uncertainty in such structural and material properties is thus inherent in the RC flat plate systems, and hinders simplification of the design process in terms of slab flexure, unbalanced moment transfer at a slab-column connection, and punching shear. For these reasons, there have been substantial changes and updates in building codes relating to flat plates and slab-column connections over a handful of decades. Also, for the same reason, some of codes never have been revised. As a consequence of nonsimultaneous development of each provision, it tends to confuse structural engineers when using a mixture of all different US code provisions. In this paper, in the step-by-step logical order, seismic design of the RC flat plate systems is re-organized and clarified to make it easier to apply. Furthermore, recent changes or proposed changes are introduced, and are explained as to how it will apply in practice.