• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.27-30
• /
• 2004

The objectives of the present study is to solve problems in PC tile before-fixing method using ordinary concrete by adopting the liquefaction method in manufacturing PC to which the tile before-fixing method is applied, and to provide basic information for the practical use of the PC tile before-fixing method, which uses high workable concrete, through manufacturing a complex body based on the optimal mix proportion,

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.3
• /
• pp.43-52
• /
• 1988

In this paper, three kinds of proportioning method on concrete mixes containing fly ash as an admixture were compared and investigated. As the test results for relationships between substitution ratio of fly ash, water-binder ratio, ages and strength besides the proportioning methods and workability of fresh concrete beneficial reference data to estimate quality of domestic fly ash were atained.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.85-86
• /
• 2018

In the case where the building's rooftop was laid without any foundation, the combined deterioration, such as the repetition of shrinkage and expansion caused by temperature changes, caused further cost generation and damage. To prevent this, the concrete mixing design and construction process shall be established to resist combined deterioration.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.301-306
• /
• 1999

Over 4.1 billion metric tons of non-hazardous solid wastes are generated in the United States anually. Therefore, there is a need to reuse or reprocess as many products or by -products as possible. In this report, the aggregates produced from Naval Shipyard and Charlexton area dredge spoils are designated as NC and DS, respectively. The major objective of this portion was to determine the feasibility of the use of these aggregates in concrete mixtures. According to test results, the unit weight of concrete mixtures containing NC and DS (vitrified glass) was lower than the control mixture, and the control mixture produced higher compressive and bending strength compared to mixtures containing vitrified glass. However the mixtures containing vitrified glass still could be used in the field based on the minimum criteria set for the mix desgin.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.6
• /
• pp.195-206
• /
• 1997

산업폐기물인 폐주물사를 재활용하여 에너지절감과 환경오염방지효과를 얻을 수 있다. 반요인실험법을 사용하여 폐주물사를 잔골재에 일정비율 치환한 콘크리트의 적정배합설계제시를 위한 예비실험에서 물-시멘트비, 폐주물사의 잔골재치환율, 잔골재율, 슬럼프와 같은 주요변수와 변수사이의 2차상호작용을 파악하였다. 예비실험결과 폐주물사의 잔골재치환율 70%까지 실시하였을 때 폐주물사를 혼입한 콘크리트의 강도 발현에 가장 중요한 변수는 물-시멘트비로 분석되었고 폐주물사의 잔골재치환율은 거의 영향이 없는 것으로 분석되어 폐주물사를 콘크리트의 잔골재로 대체할 수 있음을 알 수 있었다. 각 변수의 2차상호작용에서는 폐주물사의 잔골재치환율과 잔골재율의 상관관계가 콘크리트의 강도발현에 가장 큰 영향을 미치는 것으로 나타났다. 목표압축강도에 대한 적정배합조건을 폐주물사의 잔골재 치환율에 따라 물-시멘트비, 잔골재율에 대해 제시하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.3
• /
• pp.177-185
• /
• 1999

In this study, study about fly ash and blast-furnace slag used as substitutive materials for cement, and the influence on the neutralization of high flow concrete durability with these substitutive materials was performed and analyzed. The results are as follows 1) Aggregate segregation was partially improved with the progress of the admixture input at the mix proportion above slump flow 65 cm 2) Compressive strength with the progress of the increasement of fly ash input was decreased in early age, but decrease range was improved in long term age. Also, in case of blast-furnace, similar or improved compressive strength was appeared. 3) The neutralization depth with fly ash input was noticeably increased. But blast-furnace slag was effective to prevent. 4) In this experiment, high powder content was advantageously affected on preventive effect of the neutralization, and the relationship between the compressive strength and the neutralization depth was inversely proportional.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.243-244
• /
• 2023

The quality of ready-mix concrete, a decisive factor in the performance of a structure, has recently been ensured by considering the unit water testing method, and this study experimentally examined the reliability of evaluation results based on this method.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.130-135
• /
• 1998

This paper presents results of research performed to identify optimum mix proportions for production of flowable fill with high volume fly ash content. The fly ash used in this study met the requirements of KS L 5405 and ASTM C 618 for Class F material. Tests were carried out on concrete designed to have 10 ~ 15kg/$\textrm{cm}^2$ compressive strength at the 28-day age with fly ash contents of approximately 280kg/㎥. Slump was held at 25$\pm$1cm for all mixtures produced compressive strengths at 28 days were found to range from 5.03 to 13.69kg/$\textrm{cm}^2$.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.270-271
• /
• 2014

In this study, a replacement ratio of blast furnace slag coarse aggregate and a water binder ratio by an optimum combination of PHC file was investigated. As a results, the target strength 78.5MPa was altogether satisfied in a mix proportion 28-G100-SG0 and W/B ratio 26 %. The surface rupture was generated in 28-G0-SG100 combination after curing with the autoclave. According to the result of measuring the ingredient, the majority were the MgOH2 hydrate.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.57-58
• /
• 2023

This study was proceeded to analyze thixotropy of cement paste according to the addition timing of PVA and borax as a basic study of thixotropy of concrete. According to experiment results, the case added borax first and PVA later is that cement paste shows low thixotorpy, and the case added PVA first and borax later is that cement paste shows thixotropy but in certain mix condition fluidity of decrease due to a chemical bond between PVA and borax. The case add PVA and borax simultaneously is that cement paste was expressed thixotropy in all mix condition. Therefore the case add PVA and borax simultaneously is suitable for expressing thixotropy of cement paste.