• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.694-701
• /
• 2022

This paper introduces a study of concrete structures with a broken tire and a flat tire as a complete overhaul. The materials used to make concrete in this study are solid aggregate, cement, sand, flat tire, broken wheel, drinking water, and Ordinary Portland Cement. A total of 6 main compounds were thrown into solid cylinders and replaced by 0% as a controller followed by 5% and 10%. The cylinder pressure test of the concrete is done by applying the same pressure to the cylinders until a failure occurs. The results of the pressure test show that by applying 5% aggregation the pressure decreases. In Crumb wheel joints, the compression force decreases constantly as the percentage change increases. Therefore, the crumb wheel is not recommended for use as a complete replacement due to its compressive church power.

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.726-736
• /
• 2003

섬유에 의하여 보강된 콘크리트의 압축강도와 최대 변형률은 현저하게 증가한다. 지난 10여년간 섬유보강 콘크리트의 구속효과에 대한 많은 연구가 수행되었지만, 기존 제안식의 대부분은 횡구속된 콘크리트의 압축강도 예측에 중점을 두고 있으며, 예측된 최대변형률은 실제값을 과대 또는 과소 평가하는 경향이 있다. 이 논문에서는 콘크리트 실린더 실험을 통해, 섬유보강된 콘크리트의 압축강도 및 최대변형률을 예측할 수 있는 평가식을 제안하였다. 구속콘크리트의 압축강도와 섬유의 파단강도 및 시험체의 크기효과를 고려하여 제안된 평가식은 기존의 제안식보다 정확하게 구속 콘크리트의 압축강도 및 최대 변형률을 예측하였다. 또한 섬유의 응력-변형률곡선의 특성을 고려하여 제안된 구속 콘크리트의 축방향 응력-변형률곡선은 탄소섬유에 의하여 구속된 콘크리트의 응력-변형률곡선을 기존의 제안식보다 정확하게 추적하였다.

• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.135-144
• /
• 2007

최근에 노후화된 콘크리트 구조물의 보수 보강 방법으로 FRP를 이용한 보강이 효과적인 것으로 알려지고 있다. 본 연구의 목적은 FRP로 보강된 콘크리트 실린더의 거동을 실험적으로 조사하고자 하는 것이다. 실험 변수로는 콘크리트의 압축강도, FRP재료의 종류 및 구속비이다. 본 연구에서 아라미드, 탄소 및 유리섬유로 보강된 콘크리트의 성능을 압축강도 실험을 통한 연구 결과를 보이고 있다. 이를 위해 축방향 하중, 축방향 및 횡방향 변형률을 측정하였다. 본 연구를 통하여 콘크리트의 강도와 횡방향 변형률과 횡방향 구속응력의 비로 정의되는 구속비가 구속 콘크리트의 응력-변형률을 결정하는 주요 인자인 것으로 나타났다. FRP로 더 많은 보강을 한 실험체는 우수한 구속력으로 인한 강도의 증가를 야기하였다. 고강도 콘크리트의 경우 FRP에 의한 보강으로 구속력의 증가이 증가되더라도 실험체의 압축변형률이 감소하여 취성파괴의 경향을 보였다. 구속된 콘크리트의 파괴는 FRP 재료의 극한 변형률 보다 낮은 변형률에서 FRP의 파단으로 시작되어 콘크리트의 파괴에 도달하였다.

• Structural Engineering and Mechanics
• /
• 제36권6호
• /
• pp.759-783
• /
• 2010

In this paper, compressive strength of carbon fiber reinforced polymer (CFRP) confined concrete cylinders is formulated using a hybrid method coupling genetic programming (GP) and simulated annealing (SA), called GP/SA, and a robust variant of GP, namely multi expression programming (MEP). Straightforward GP/SA and MEP-based prediction equations are derived for the compressive strength of CFRP-wrapped concrete cylinders. The models are constructed using two sets of predictor variables. The first set comprises diameter of concrete cylinder, unconfined concrete strength, tensile strength of CFRP laminate, and total thickness of CFRP layer. The most widely used parameters of unconfined concrete strength and ultimate confinement pressure are included in the second set. The models are developed based on the experimental results obtained from the literature. To verify the applicability of the proposed models, they are employed to estimate the compressive strength of parts of test results that were not included in the modeling process. A sensitivity analysis is carried out to determine the contributions of the parameters affecting the compressive strength. For more verification, a parametric study is carried out and the trends of the results are confirmed via some previous studies. The GP/SA and MEP models are able to predict the ultimate compressive strength with an acceptable level of accuracy. The proposed models perform superior than several CFRP confinement models found in the literature. The derived models are particularly valuable for pre-design purposes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.15-16
• /
• 2009

본 연구에서는 콘크리트 실린더에 대한 고강도 횡보강근의 구속 효과를 검토하였다. 이 실험에서는 콘크리트의 강도, 횡보강근의 항복강도 및 간격을 변수로 하여 고강도 횡보강근이 콘크리트 거동에 미치는 영향을 평가하였다.

• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.515-535
• /
• 2022

The strength models for fiber-reinforced polymer (FRP)-confined normal strength concrete (NC) cylinders available in the literature have been suggested based on small databases using limited variables of such structural members portraying less accuracy. The artificial neural network (ANN) is an advanced technique for precisely predicting the response of composite structures by considering a large number of parameters. The main objective of the present investigation is to develop an ANN model for the axial strength of FRP-confined NC cylinders using various parameters to give the highest accuracy of the predictions. To secure this aim, a large experimental database of 313 FRP-confined NC cylinders has been constructed from previous research investigations. An evaluation of 33 different empirical strength models has been performed using various statistical parameters (root mean squared error RMSE, mean absolute error MAE, and coefficient of determination R²) over the developed database. Then, a new ANN model using the Group Method of Data Handling (GMDH) has been proposed based on the experimental database that portrayed the highest performance as compared with the previous models with R²=0.92, RMSE=0.27, and MAE=0.33. Therefore, the suggested ANN model can accurately capture the axial strength of FRP-confined NC cylinders that can be used for the further analysis and design of such members in the construction industry.

• 대한토목학회논문집
• /
• 제31권4A호
• /
• pp.331-340
• /
• 2011

콘크리트 공시체의 압축강도와 연성성능을 향상시키기 위하여 섬유-강판 복합플레이트 fiber-sheet and steel-plate composite plate(FSP))의 적용을 실험적으로 연구하였다. FSP 보강재료, 앵커볼트 설치방법, 콘크리트 압축강도 등이 고려된 FSP 보강 콘크리트 공시체의 압축실험을 실시하였다. FSP 보강 콘크리트 공시체의 압축실험결과, FSP는 콘크리트 공시체의 압축강도와 변형저항성능을 크게 향상시켰다. FSP 보강 콘크리트 공시체의 압축성능은 FSP 보강재 종류, 앵커볼트 사용방법, 콘크리트 압축강도에 영향을 받는 것으로 나타났다. 앵커볼트를 사용한 FSP 보강 콘크리트 공시체 실험에서 측정된 FSP의 파단변형률은 FRP 보강 콘크리트 압축부재 실험에서 측정된 FRP 파단변형률보다 크게 측정되었다. FSP 파단변형률의 크기는 FSP의 보강효과에 영향을 미친다. FSP 보강 콘크리트 공시체 압축실험에서 측정된 축방향변형률, 원주방향변형률, 체적 변형률에 의한 FSP 내부 콘크리트의 손상상태를 분석하여 FSP 보강효과를 평가하였다. 연구결과, FSP 보강공법은 콘크리트 압축부재의 보강방법으로 실용적 기법이라 판단된다.

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.23-34
• /
• 2000

This paper reports the effects of curing temperature and aging on the strength and the modulus of elasticity. In oder to determine the strength and the modulus of elasticity with curing temperature and aging, experimental and analytical methods are adopted. The tests of 480 cylinders are carried out for type I, V and V with 15 percent replacement of fly ash cement concretes, which are cured at isothermal conditions of 10, 23, 35 and 5$0^{\circ}C$. and the concrete cylinders are tested at the ages of 1, 3, 7 and 28 days. According to the experimental results, the concrete subjected to high temperature at early ages attaines higher early-age compressive and splitting tensile strength but eventually attaines lower later-age compressive and splitting tensile strength. Even if modulus of elasticity has the same tendency, the variation of modulus of elasticity with curing temperature is smaller than that of compressive strength. Based on these experimental results, the relationships among compressive strength, modulus of elasticity and splitting tensile strength are proposed considering the effects of curing temperature, aging and cement type.

• Computers and Concrete
• /
• 제30권3호
• /
• pp.165-173
• /
• 2022

The effect of basalt and polypropylene fibers on the flexural behavior of reinforced concrete (RC) beams is investigated in this paper. The compressive and tensile behaviors of the basalt concrete and polypropylene concrete cylinders are also investigated. Eight beams and 28 cylinders were made with different percentages of basalt and polypropylene fibers. The dosages of fiber were selected as 0.6%, 1.3%, and 2.5% of the total cement weight. Each type of fiber was mixed solely with the concrete mix. Basalt and polypropylene fibers are modern and cheap materials that can be used to improve the structural behavior of RC members. This research is designed to find the optimum percentage of basalt and polypropylene fibers for enhancing the flexural behavior of RC beams. Test results showed that the addition of basalt and polypropylene fibers in any dosage (0.6%, 1.3%, and 2.5%) can increase the flexural strength and displacement ductility index of the beams where the maximum enhancement was measured with 1.3% fibers. The maximum increments in the flexural strength and the displacement ductility index were 30.39% and 260% for the basalt fiber case, while the maximum improvement for the polypropylene fibers case was 55.5% and 230% compared to the control specimen. Finite element (FE) models were then developed in ABAQUS to predict the numerical behaviour of the tested beams. The FE models were able to predict the experimental behaviour with reasonable accuracy. This research confirms the efficiency of basalt and polypropylene fibers in enhancing the flexural behavior of RC beams, and it also suggests the optimum dosage of fibers.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.243-248
• /
• 2003

To select the proper material for lean concrete, the recycled aggregates produced by 3 crushers, such as jaw, impact and mill-treated, were investigated for the gradation and the compaction, and strength of concrete made of them. The experiments for all the recycled aggregates used, showed that the cylinders made of them had 7-day compressive strengths over 50kgf/$cm_2$, the provision of qualification, and the OMCs are in the range 5.7% to 6.8%. Also, the unit cement contents for the impact-crushed are 158kg/$cm_2$.