Browse > Article
http://dx.doi.org/10.4334/JKCI.2007.19.2.135

Stress-Strain Behavior Characteristics of Concrete Cylinders Confined with FRP Wrap  

Lee, Dae-Hyoung (Dept. of Civil, Gyeongdo Provincial College)
Kim, Young-Sub (Dept. of Civil Engineering, Chung-Ang University)
Chung, Young-Soo (Dept. of Civil Engineering, Chung-Ang University)
Publication Information
Journal of the Korea Concrete Institute / v.19, no.2, 2007 , pp. 135-144 More about this Journal
Abstract
Recently, fiber-reinforced plastic(FRP) wraps are blown as an effective material for the enhancement and rehabilitation of aged concrete structures. The purpose of this investigation is to experimentally investigate behavior of concrete cylinder wrapped with FRP materials. Experimental parameters include compressive strength of concrete cylinder, FRP material, and confinement ratio. This paper presents the results of experimental studies on the performance of concrete cylinder specimens externally wrapped with aramid, carbon and glass fiber reinforced Polymer sheets. Test specimens were loaded in uniaxial compression. Axial load, axial and lateral strains were investigated to evaluate the stress-strain behavior, ultimate strength ultimate strain etc. Test results showed that the concrete strength and confinement ratio, defined as the ratio of transverse confinement stress and transverse strain were the most influential factors affecting the stress-strain behavior of confined concrete. More FRP layers showed the better confinement by increasing the compressive strength of test cylinders. In case of test cylinders with higher compressive strength, FRP wraps increased the compressive strength but decreased the compressive sham of concrete test cylinders, that resulted in prominent brittle failure mode. The failure of confined concrete was induced by the rupture of FRP material at the stain, being much smaller than the ultimate strain of FRP material.
Keywords
aramid fiber; carbon fiber; glass fiber; confined pressure; stress-strain model;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Mander, J. B., Priestley, M. J. N., and Park, R. 'Theoretical Stress-Strain Moedel for Confined Concrete', Journal of Structural Engineering, ASCE, Vol.114, No.8, 1988, pp. 1804-1826   DOI   ScienceOn
2 이정윤, 정훈식, '섬유에 의하여 구속된 원형콘크리트 기둥의 최대변형률 예측', 콘크리트학회논문집, 15권 5호, 2003, pp.726-736
3 ACT 440R-96, State-of-the-Art Report on Fiber Reinforecd Plastic (FRP) Reinforcement for Concrete Structures, American Concrete Institute (ACT) Committe 440, Farmington Hill, Michigan, USA
4 Teng, J. G., Chen, J. F., Smith, S. T., and Lam, L., FRPStrengthened RC Structures, John Wiley & Sons Ltd., New York, 2002
5 Priestley, M. J. N., Seible, F., and Calvi, G. M., Seismic Design and Retrofit of Bridges, John Wiley & Sons, Inc., 1996, pp.585-653
6 Toutanji, H., 'Stress-Strain Characteristics of Concrete Columns Externally Confined with Advanced Fiber Composite sheets', ACI Materials Journal, Vol.96, No.3, 1999, pp. 397-404
7 천성철, 김지영, 박형철, 박칠림, '탄소섬유로 횡구속된 콘크리트의 응력-변형도 모델에 관한 연구', 대한건축학회 논문집, 15권 1호, 1997, pp.27-36
8 Richart, F.E., Brandtzaeg, A., and Brown, R. L., 'A Study of the Failure of Concrete under Combibed Compressive sterss', Bulletin 185, University of Illinois Engineering Experimental Station, Champion, IlI., 1928
9 Mirmiran, A., Samaan, M., Cabrera, S., and Shahawy, M., 'Design, Manufacture Concrete Beam-Columns', Journal of Structural Engineering, ASCE, Vol.125 , No.10, 1998, pp.1085-1093   DOI
10 정신욱, 류천, 김의성, 김화일, 김상섭, '탄소섬유쉬트로 횡구속된 콘크리트의 강도 증진에 관한 연구', 한국콘크리트학회 가을학술발표대회 9권 2호, 1997, pp.462-471
11 이명, 이성우, 최석환, 조남훈, '콘크리트충전 복합소재 합성부재의 횡구속 거동분석', 한국콘크리트학회, 가을학술발표회 논문집, 13권 2호, 2001, pp.585-590
12 황진석, '탄소섬유쉬트로 횡구속된 콘크리트 공시체의응력도-변형도 특성', 대한건툭학회 논문집, 17권 9호, 2001, pp.212-220
13 Mirmiran, A. Shahawy, M., Samaan, M., and EI Echary, H., 'Effect of Column Paramerters on FRP-Confined Concrete', Journal of Composites for Construction, ASCE, Vol.2, No.4, 1998, pp.175-185   DOI   ScienceOn
14 Mirmiran, A., Samaan, M., Cabrera, S., and Shahawy, M., 'Design, Manufacture Concrete Beam-Columns,' Journalof Structural Engineering, ASCE, Vol.125, No. 10, 1998, pp.1085-1093
15 Mirmiran, A, Shahawy, M., EI Khoury, C., and Naguib, W., 'Large Beam - Column Tests on Concrete-Filled Composite Tubes', ACI Structural Journal, Vol.97, No.2, 2000, pp.268-276
16 Richart, F. E., Brandtzaeg, A., and Brown, R. L., 'A Study of the Failure of Concrete under Combined Compressive Stresses', University of Illinois, Engineering Experimental Station, Illinois, USA, 1929
17 Xiao, Y. and Ma, R., 'Seismic Retrofit f RC Ccircular Columns Using Prefabricate Composite Jacketing', Journal of Structural Engineering, ASCE, Vol.123, No.3, 1997, pp.1357- 1364   DOI   ScienceOn
18 Richart, F. E., Brandtzaeg, A, and Brown, R. L., 'The Eailure of Plain and Sprially Reinforced Concrete in Compression', University ofIllinois, Engineering Experimental Station, Illinois, USA, 1929
19 Saafi, M., Toutanji, H. A, and Li, Z., 'Behavior of Concrete Columns Confined wiht Fiber Reinforced Polymer Tudes', ACI Materials Journal, Vol.96, No.4, 1999, pp.500-509
20 Smaan, M., Mirmiran, A, and Shahawy, M., 'Model of Concrete Confined by Fiver Composite', Journal of Structurnal Engineering, ASCE, Vol.124, No.9, 1998, pp.1205- 1031