• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.885-890
• /
• 2002

Pseudo dynamic test is an on-line computer control method to achieve the realism of shaking table test with the economy and versatility of the conventional quasi-static approach. Pseudo dynamic tests of four full-size RC bridge piers have been carried out to investigate their seismic performance. For the purpose of precise evaluation, the experimental investigation was conducted to study the seismic performance of the real size specimen, which is constructed for highway bridge piers in Korean peninsula. Since it is believed that Korea belongs to the moderate seismicity region, three test specimens were designed in accordance with limited ductility design concept. Another one test specimen was nonseismically designed according to a conventional code. Important test parameters were transverse reinforcement and lap splicing. Lap splicing was frequently used in the plastic hinge region of many bridge columns. Furthermore, the seismic design code is not present about lap splice in Korean Roadway Bridge Design Code. The results show that specimens designed according to the limited ductility design concept exhibit higher seismic resistance. Specimens with longitudinal steel lap splice in the plastic hinge region appeared to significantly fail at low ductility level.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.903-908
• /
• 2000

The role of intermediate diaphragms in concrete girder bridge was studied by structural tests about 1/2 scale model of the typical design. The purpose of this research is understanding of the role of intermediate diaphragms which has been misused by vertical load distribution and misunderstood by design specification. Experimental variables included : location and number of intermediate diaphragms which were made by reinforced concrete or steel. Service load was applied the structure under static loads. Numerical analysis of the test bridge using solid element of finite element method was verified by comparison with the experimental results. Based on the results, in no case was an appreciable reduction in terms of vertical deflection.

• 콘크리트학회논문집
• /
• 제28권5호
• /
• pp.545-553
• /
• 2016

이 논문에는 교량바닥판의 지간장이 짧은 단지간용 프리캐스트 콘크리트패널에 대해 수행한 정적하중 재하실험 결과들을 나타내었다. 단지간용 콘크리트패널은 콘크리트패널 하면에 콘크리트리브가 부착되어 있으며, 기존 LB-DECK과 달리 콘크리트패널 상면에 Top bar가 없는 단면이다. 콘크리트패널에 부착되는 콘크리트리브의 개수와 단면 상세는 교량바닥판의 지간장과 철근콘크리트바닥판 두께 변화에 따른 설계하중에 대해 변수해석 결과를 토대로 결정하였다. 콘크리트패널 상면에는 현장타설되는 콘크리트와 합성거동을 위해 전단철근을 배치하였다. 변수해석을 통해 산정된 콘크리트패널이 설계하중에 대해 사용성과 안전성을 만족하는 가를 확인하기 위해 정적하중 재하실험을 수행하였다. 지간장 1.6 m인 단지간 콘크리트패널 실험체 3개 제작한 후 정적하중 재하하면서 각 실험체의 처짐, 균열, 그리고 최종 파괴양상을 살펴보았다. 설계하중이 작용할 때 각 실험체의 처짐, 균열하중, 그리고 균열폭을 토대로 사용성을 평가하였다. 또한 각 실험체의 최종 파괴양상과 극한강도를 토대로 계수설계하중에 대한 안전성을 평가하였다. 실험 결과 단지간용 콘크리트패널이 사용성과 안전성을 만족하는 것을 확인할 수 있었다. 추가적으로 단지간용 콘크리트패널을 적용할 수 있는 교량바닥판의 지간장 범위를 검토하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.463-468
• /
• 2002

Transverse prestressing of bridge decks is an attractive concept with substantial benefits in both economy and crack control in slabs. To evaluate the necessary information for the prestressed long span bridge slab design, a series of static and fatigue tests were peformed. It is shown that the minimum thickness recommendation in Korean Highway Bridge Design Code is too conservative.

• Advances in Computational Design
• /
• 제4권3호
• /
• pp.211-221
• /
• 2019

Numerical modeling of reinforced concrete structures is a difficult engineering problem, primarily because of the material inhomogeneity. The behaviour of a concrete element with reinforcement can be analyzed using, for example, the Barcelona model, which according to the literature, is one of the most suitable models for this purpose. This article compares the experimental data obtained for an orthotropic concrete slab band system with those predicted numerically using Concrete Damage Plasticity model. Abaqus package was used to perform the calculations.

• 콘크리트학회논문집
• /
• 제17권4호
• /
• pp.559-567
• /
• 2005

본 연구는 혼화재료(실리카퓸, 플라이애쉬, 고로슬래그)를 사용하여 교면 포장에 적용할 고성능 콘크리트의 최적배합비를 도출하기 위하여 실시되었다. 최적배합비를 도출하기 위하여 실리카퓸, 플라이애쉬, 고로슬래그의 세가지 혼화재료를 고려하여 통계학의 최적화 기법인 Box Behnken 설계 방법을 사용하였다. 압축강도와 염소이온투과저항성 시험을 실시하였으며 시험 결과를 기초로 최적의 배합비를 도출하였다. 도출된 최적배합은 기술적으로 분석하였으며 시험 결과는 교면포장을 위한 고성능 콘크리트 성능 기준과 비교하였다. 최적배합은 만족할 만한 성능을 보여주었다. 또한 최적배합으로 도출된 고성능 교면포장 콘크리트는 재료의 가격뿐만 아니라 모빌믹서를 사용하지 않고 일반 믹서를 사용하기 때문에 시공비용도 감소시킬 수 있다.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.371-384
• /
• 2020

The steel-concrete double composite girder in the negative flexural region combines an additional concrete slab to the steel bottom flange to prevent the local steel buckling, however, the additional concrete slab may lower down the neutral axis of the composite section, which is a sensitive factor to the tensile stress restraint on the concrete deck. This is actually of great importance to the structural rationality and durability, but has not been investigated in detail yet. In this case, a series of 5.5 m-long composite girder specimens were tested by negative bending, among which the bottom slab configuration and the longitudinal reinforcement ratio in the concrete deck were the parameters. Furthermore, an analytical study concerning about the influence of bottom concrete slab thickness on the cracking and sectional bending-carrying capacity were carried out. The test results showed that the additional concrete at the bottom improved the composite sectional bending stiffness and bending-carrying capacity, whereas its effect on the concrete crack distribution was not obvious. According to the analytical study, the additional concrete slab at the bottom with an equivalent thickness to the concrete deck slab may provide the best contributions to the improvements of crack initiation bending moment and the sectional bending-carrying capacity. This can be applied for the design practice.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.367-372
• /
• 2002

The waterproofing systems of concrete bridge deck are installed under the complex circumstances, such as traffic loading, weather, and the condition of the deck concrete. For assuring the effectiveness of waterproofing system, the materials and the construction method and timing ought to be suitably selected with the procedures of waterproofing and the system has to ensure the economical performances. First of all, we discussed whether the quality and performance criteria for highway bridge deck are resonable or not through the investigation of domestic and foreign criteria. The basic properties of waterproofing membranes on market and the performance of waterproofing systems of concrete bridge deck have also been investigated in the view of the damages frequently reported from job site. In this way, the causes and measures of damages, the guidelines of design, construction, quality control, and maintenance, the test methods and criteria of membranes and waterproofing system, are proposed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.485-490
• /
• 2000

Because of occuring easily the crack, debond, lutting on asphalts pavement of bredge decks under traffic's heavy weigt load. We investigated the application of latex modified concrete to resurface and repaire bridge decks for preventing the above problems. Here, Using the ordinary portland cement and high early cement, We rested mix design, workability, compressive strength, adhesive power, drying shrinkage, carbonation, and economic estimation etc. We selected the condition of application to resurface and repaire bridge decks and detected high early cement is superior to ordinary portland cement in results of analyzing the application of the repairing bridge decks and economic estimations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.141-146
• /
• 2002

The purpose of this study is to develop a reasonable design for transverse confinement reinforcement considering ductility and required transverse confinement reinforcement of RC bridge columns. In order to develop relationships between the curvature ductility and required transverse confinement reinforcement for design purpose, the analysis using the computer program NARCC have been carried out for parametric studies. Based on the results from the parametric studies, an equation for calculating the required transverse confinement reinforcement based on ductility demand was developed for seismic design of RC bridge columns. The equations proposed by this study will provide more reasonable and more effective design guidelines for performance-based seismic design of RC bridge columns.