• PNF and Movement
• /
• 제13권2호
• /
• pp.73-80
• /
• 2015

Purpose: The purpose of this study was to determine the effect of symmetrical-reciprocal pattern of scapula and pelvis exercises using proprioceptive neuromuscular facilitation (PNF) on gait speed and balance in patients with hemiplegia. Methods: Among the adult patients with hemiplegia that were hospitalized at Michuhol Rehabilitation Center after being diagnosed with stroke, 10 that were capable of independent walking for more than five minutes and that understood and cooperated with the therapy and test methods of this research, were selected as subjects. The therapy was implemented based on the concept of PNF, and it was performed on a low mat and a height-adjustable mat, as proscribed by the fundamental procedure for PNF. Symmetrical-reciprocal pattern of scapula and pelvis exercises were applied to the patients in the decubitus position. The therapy scheme included stabilizing reversals, rhythmic stabilization, and a combination of isotonics, rhythmic initiation, and dynamic reversals. To investigate gait speed and body trunk mobility before and after the symmetrical-reciprocal pattern of scapula and pelvis exercises were applied, walking speed for a distance of 10 m was measured and balance was tested based on the Berg-Balance scale test table. The Berg-Balance scale test was performed by one therapist to minimize any error that could occur from the subjective evaluation method used by therapists. Results: Gait speed increased by 8.97 seconds after applying the symmetrical-reciprocal pattern of scapula and pelvis exercises using the concept of PNF, showing a significant difference (p<0.01). However, balance showed no significant difference after the therapy (p>0.14). Conclusion: Exercise therapy that uses the symmetrical-reciprocal pattern of scapula and pelvis with the concept of PNF can be said to be a useful therapeutic technique that can enhance the walking speed of patients with hemiplegia.

• 대한산업공학회지
• /
• 제33권4호
• /
• pp.393-401
• /
• 2007

Affective aspects of design attributes such as color, Pattern, and texture are important to the overall impression and the success of interior products. Among all the interior materials, wallpapers and flooring materials take up largest construction area and they are main components in creating affective impression for customers. This study aims to investigate the relationship between luxuriousness and related affective variables and design elements of wallpapers and flooring materials. The approach consists of 3 steps: (1) selecting related affective features and product design attributes through a literature survey, opinion of expert panel, and focus group interview, (2) conducting evaluation experiments, and (3) developing Kansei models using multivariate statistical analysis and analyzing critical attributes. Evaluation experiment was conducted using a questionnaire made up of 7-point scale and 100-point scale and 30 housewives and 20 interior designers participated in the evaluation experiment. The result of evaluation was analyzed through principal component regression and quantification I analysis. As a result of analyzing the survey data, the relationship between luxuriousness and related affective features and product design attributes was identified, moreover a optimal combination of the design component was identified. Consequently, it is expected that the results of the study would be a basis of the concept of emotion-based design by giving insights about how customers perceive the luxuriousness and suggesting the optimal combination, and providing specific quantitative design guidelines.

• 지식경영연구
• /
• 제5권2호
• /
• pp.67-98
• /
• 2004

New knowledge is created through the dynamic interaction of knowledge that depends largely on a social context within the organization. Social processes influence the nature of knowledge and learning. This paper is rooted in the concept of social capital. Social capital theory emphasizes the importance of social relationship. Using social capital theory, this paper suggests three factors that must be satisfied for the development of knowledge combinative capability. The first factor is that the opportunity exists to make the exchange or combination of knowledge. The second factor is that people is motivated for the creation of new knowledge. The third factor is that people must share the common knowledge. This paper examines the change case of KIPO (Korean Intellectual Property Office). This case provides evidence that the three factors can develop social relationship, and build knowledge combinative capability. The man finding from this research is that social factors play an important part in the creation of knowledge, and processes of knowledge exchange and combination heavily rely upon social patterns, practices and processes in ways which emphasize the value and importance of collective action and knowledge sharing. This research may have several implications for the development of the knowledge creation mechanisms.

• International Journal of Costume and Fashion
• /
• 제7권1호
• /
• pp.62-71
• /
• 2007

The color is one of the important key words in Fashion arena today. In fashion, the image and concept changes by use of color or color combinations. The purpose of this research is to pursue the characteristics of color and color combinations through analyzing the colors utilized in oriental fashion design. It is necessary to define the oriental fashion design to build a criteria for collecting law materials for analysis of the research. As a conclusion, traditional oriental colors already used in various traditional artifacts were popular in use by many fashion designers with volatile attitudes towards its original symbolic meanings or philosophy. For example, yellow and red stands for gorgeous or sexy images through fashion design instead of express its original symbols of power and prosperity. The Complimentary Color Combination in hue, value and intensity of colors were also found in fashion design impling oriental images. While Contemporary Fashion Trend Color were also used in expressing Oriental images with oriental details considering fashion market. In using Oriental colors The characteristics of oriental colors and its combinations used in fashion designs are significant and their influences are meaningful not only in fashion design but also adjacent design areas.

• 복식
• /
• 제58권1호
• /
• pp.116-132
• /
• 2008

Continuity and discontinuity is a relative concept, and there are various categories of the continuity and discontinuity in our circumference. In the thought of postmodernism of the late of 20th Century, continuous creations of the difference and the repetition have being regarded as a discontinuity. But, because of that catches the moment occurring qualitative skip though the flowing of the everlasting time, this has been known to a shortsighted viewpoint overlooking characteristic of the qualitative continuity of an organism, which have being created continuous formation for life through the flowing of the time. Therefore, this had studied like this complex social condition and various relationships expressed in modern fashion focusing on permanently creative movements and behaviors equal to the qualitative continuity. This Thesis is following study about continuity, and aims at understanding of those formative characteristics through consideration about characteristics of qualitative continuity. And, this analyzes formative characteristics of the qualitative continuity into 5 sets: enlargement, conversion, structural variability, mutual combination, and deconstruction. This thesis intends to grasp complex modern social phenomenon and modern fashion into qualitative continuity that means continuous formation and the change of various relationships according to recognition about the course toward open thinking.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.129-132
• /
• 1999

In this Paper, new congention control schemes using the adaptive rate control for ATM LANs are presented. If is preferable for hosts in LANs to be able to send bursts at the same speed as the interface link speed in a lightly loaded condition, and as the network load increases, to reduce their traffic rate adaptively in order to avaid network congestion. We propose to apply such a rate control concept for two different traffic classed in the ATM LANs. For the first traffic class requiring no bandwidth reservation, i.e, a best effort service class, a combination of the end-to-end adaptive peak rate control with the link-by-link backpressure control is proposed. For the second traffic class, requiring the bandwidth reservation for the burst transmission, i.e. guaranteed burst service class, a combination of he adaptive peak rate control with the fast bandwidth reservation is proposed.

• 대한산업공학회지
• /
• 제23권1호
• /
• pp.197-213
• /
• 1997

It is not easy to find a good production schedule which can be used in practice. Therefore, production scheduling simulation with a simple dispatching rule or a set of dispatching rules is used. However, a simple dispatching rule may not create a robust schedule, for the same rule is blindly applied to all internal production processes. The presumption is that there might be a specific combination of appropriate rules that can improve the efficiency of a total production system for a certain type of orders. In order to acquire a better set of dispatching rules, simulation is used to examine the performance of various combinations of dispatching rule sets. There are innumerable combination of rule sets. Hence it takes too much computer simulation time to find a robust set of dispatching rule for a specific production system. Therefore, we propose a concept of the knowledge based simulation to circumvent the problem. The knowledge based simulation consists of knowledge bases, an inference engine and a simulator. The knowledge base is made of rule sets that is extracted from both simulation and human intuition obtained by the simulation studies. For a certain type of orders, the proposed system provides several sets of dispatching rules that are expected to generate better results. Then the scheduler tries to find the best by simulating all proposed set of rules with the simulator. The knowledge-based simulator armed with the acquired knowledge has produced improved solutions in terms of time and scheduling performance.

• 한국의류학회지
• /
• 제19권2호
• /
• pp.173-189
• /
• 1995

purpose of this study is to analyze the various phenomenon related to the subjectivism of aesthetic value for dress, which is impossible to describe with only functionalism, practically and objectivism of aesthetic value for dress based on Karl Rosencrantz\ulcorners theory of the Aesthetics of ugliness from the middle of 1980's to present. In other words, the ugliness had been selected and erected as the opposite meaning of beauty to head toward ultimate beauty, and clarify that ultimate beauty is achieved through the combination of beauty is achieved through the combination of beauty and ugliness. First, the ugliness and Rosencrantz\ulcorners theory of the Aesthetics of Ugliness had been examined theoretically in the aspect of the subjectivism of aesthetic value for dress and aesthetic category. The relationship between the artistic styles related to ugliness, such as Avant-garde, Primitivism of Expressionism, Grotesque, Decadence, Kitsch, Pastich\ulcornerParody, from the late 19c to present, and the dresses representing the ugly look such as Cyber Punk, Exotic look, Detester, Grunge, Hip-hop, etc, of 1990's had been studied by using photographic materials. In this study, the basic concepts of ugliness, including formlessness, inaccuracy and deformation, formed by K. Rosencrantz had been used to reveal the interaction between modem costume and the theory of ugliness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.295-296
• /
• 2006

We developed wire frame drive unit based on SMA for the 3D Shape display. Our basic concept is wire frame combination connected with a chain form which can create various shapes and it compared with pin array mechanism which is not able to display mushroom shape. It imitates antagonist mechanism of human musculoskeletal system. we create similar motion using repair-relaxation mechanism and locking mechanism by SMA. Therefore, in this paper, we propose SMA control solution for actuating repair-relaxation mechanism and locking mechanism. In our control system. we use optical sensor and quantitative angle between wire frames for closed loop control. And we supply amplified current for SMA by circuit composed of transistor and apply PWM signal to circuit for efficient control. So, wire frame drive unit enable diversity angle control based on sensor data. And then combination of wire frame drive units will create various objects.

• 한국의류학회지
• /
• 제32권5호
• /
• pp.788-799
• /
• 2008

Since the late 20C, a lot of fashion designers have considered about new construction system in fashion. Many arguments about architectural form and construction system have being supported on enlargement of range of functionalism fashion through the consideration about new shape and combination among various any other spheres. Modular concept, which is able to divide complex construction of integration into separated basic unit and use various and liberal arrangements, is regarded alternative idea of economic construction that creates new shape and constructive beauty through the simple operation and changing combination continuously. Specially, fashion designs of Yoehlee Teng, John Ribber, and Galya Rosenfeld are estimated that they are effectively utilized architectural modular system pursuing multi-function and multi-change in fashion. Modular system utilized in fashion construction will be classified as follows: 1) layering system of Yoehlee Teng, 2) combine system of john Ribber, and 3) lego system of Galya Rosenfeld. This thesis will presents beneficial guide for simple and practical functionalism fashion design development in 21C.