• 한국결정성장학회지
• /
• 제4권1호
• /
• pp.33-41
• /
• 1994

단결정 성장과정에서 고액계면의 위치와 형상이 결정의 품질에 영향을 준다는 사실은 이미 잘 알려져 있다. 따라서 이를 결정해 주는 노내 온도분포의 파악은 매우 중요하다. 본 연구에서는 VGF 단결정법을 대사응로 발열체의 온도만을 이용하여 노내 온도분포를 구할 수 있는 프로그램을 개발하였으며,이를 사용하여 지지봉 및 도가니의 재질과 크기가 고액계면의 형상에 미치는 영향을 검토해 보았다. 지지봉의 반경이 클수록, 열전도도가 작을수록 평활한 고액계면이 나타나 . 열전도도가 등방성을 가진 도가니의 경우, 열확산계수의 증가에 따라 고액계면이 더 오목해지는 경향을 보였다. PBN과 석영 도가니의 계산 결과 비교를 통하여 도가니 열전도돋의 이방성이 고액계면에 미치는 영향을 고찰해 본 결과, 계면의 위치에 따라서 다른 양상을 보인다는 것을 알았다.것을 알았다.

• 대한기계학회논문집B
• /
• 제33권6호
• /
• pp.427-434
• /
• 2009

A new surface shape of an internal cooling passage which largely reduces the pressure drop and enhances the surface heat transfer is proposed in the present study. The surface shape of the cooling passage is consisted of the concave dimple and the riblet inside the dimple which is protruded along the stream-wise direction. Direct Numerical Simulation (DNS) for the fully developed turbulent flow and thermal fields in the cooling passage is conducted. The numerical simulations for five different surface shapes are conducted at the Reynolds number of 2800 based on the mean bulk velocity and channel height and Prandtl number of 0.71. The driving pressure gradient is adjusted to keep a constant mass flow rate in the x direction. The thermoaerodynamic performance for five different cases used in the present study was assessed in terms of the drag, Nusselt number, Fanning friction factor, volume and area goodness factor in the cooling passage. The value of maximum ratio of drag reduction is -22.86 %, and the value of maximum ratio of Nusselt number augmentation is 7.05% when the riblet angle is $60^{\circ}$. The remarkable point is that the ratio of Nusselt number augmentation has the positive value for the surface shapes which have over $45^{\circ}$ of the riblet angle. The maximum volume and area goodness factors are obtained when the riblet angle is $60^{\circ}$.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2465-2470
• /
• 2008

A new surface shape of an internal cooling passage which largely reduces the pressure drop and enhances the surface heat transfer is proposed in the present study. The surface shape of the cooling passage is consisted of the concave dimple and the riblet inside the dimple which is protruded along the stream-wise direction. Direct Numerical Simulation (DNS) for the fully developed turbulent flow and thermal fields in the cooling passage is conducted. The Numerical simulations for the 5 different surface shapes are conducted at the Reynolds number of 2800 based on the mean bulk velocity and channel height and Prandtl number of 0.71. The driving pressure gradient is adjusted to keep a constant mass flow rate in the x direction. The thermo-aerodynamic performance for the 5 different cases used in the present study was assessed in terms of the drag, Nusselt number, Fanning friction factor, Volume and Area goodness factor in the cooling passage. The value of maximum ratio of drag reduction is -22.86 [%], and the value of maximum ratio of Nusselt number augmentation is 7.05 [%] when the riblet angle is $60^{\circ}$ (Case5). The remarkable point is that the ratio of Nusselt number augmentation has the positive value for the surface shapes which have over $45^{\circ}$ of the riblet angle. The maximum Volume and Area goodness factor are obtained when the riblet angle is $60^{\circ}$ (Case5).

• 대한심미치과학회지
• /
• 제31권2호
• /
• pp.47-55
• /
• 2022

임플란트 수복 후 발생하는 인접면 공간개방으로 인한 식편압입은 임플란트를 시술한 환자에게 매우 흔히 발생하는 현상이다. 이는 임플란트와 치아의 움직임 기전이 달라 발생하며 시간이 경과하면 30-60% 정도 발생하는데, 기여요인으로는 악골(하악), 부위(구치부), 인접치(실활치) 및 대합치(자연치 또는 임플란트) 등이 있다. 이런 현상을 방지할 수는 없으나 최소화하기 위한 노력을 기울여야 한다. 가급적 이상적인 인접접촉을 가지도록 상부 1/3에 협설로 인접치와 대칭적인 인접면 형태를 만들어 주기 위해 오목한 형태나 하방이 풍융한 인접치 형태를 수정하고 수복할 때는 다른 조건을 수정하여 변연융선의 높이를 맞추어 주어야 한다. 불규칙한 교합평면은 예후를 나쁘게 하는 원인이므로 정출된 대합치를 수정하고 기능이상을 유발하는 원심협측 교두를 수정함으로써 이상적인 교합평면을 회복함으로써 식편압입 현상을 최소화시켜야 한다.

• Journal of Welding and Joining
• /
• 제28권6호
• /
• pp.21-27
• /
• 2010

Due to excellent weld quality, orbital welding with TIG is widely applied to pipe welding. But concave back bead is formed easily in overhead and inclined-up position of butt orbital welding. It is difficult to find a paper to overcome this problem. In this study, in order to make convex back bead in overhead and inclined-up position of pipe 5G welding, control method of molten pool was actively investigated. Melt run welds were conducted on thickness 4.0mm SS400 with overhead and inclined-up position and was observed the variation of bead shape after welding with the bead former developed. The height of back bead showed the trend of increase as the distance from molten pool to the bead former was decreased. Also, there is no trend in the bead width of front and back as welding position was changed or the distance from molten pool to the bead former was decreased.

• 구강회복응용과학지
• /
• 제29권3호
• /
• pp.236-248
• /
• 2013

본 연구는 정상 안모이면서 정상교합자인 37명을 대상으로 이마 형태를 분류한 후 분류 기준값을 찾아보았고 이마 분류에 따른 상악 전치의 위치차이를 연구하였다. 또 이마형태에 영향을 주는 인자들과 상악 전치의 위치와의 상관관계를 조사하여 다음과 같은 결과를 얻었다. 1. 이마의 형태는 angular, round, straight, concave 형태로 구분 가능하다. 2. 이마의 형태를 분류할 수 있는 특정 기준 값은 존재하지 않았지만 S value와 이마길이(Tri-Gla)를 이용하여 이마형태의 분류 가능성이 존재하였다. 3. 이마의 형태에 따른 상악 전치의 위치는 차이는 존재하지 않았다. 4. 이마 기울기와 Andrews 분석값은 유의한 음의 상관관계를 갖는다. 즉 이마 기울기가 커질수록 상악 전치는 후방 위치하게 되며 다음과 같은 공식 Andrew analysis = -0.39*Forehead inclination으로 표현할 수 있다.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.583-591
• /
• 2018

Tool-chip adhesion impacts on cutting performance significantly, especially in finish cutting process. To promote cutting tools' anti-adhesion property, the concave micro-grooves texture (MGT) and convex volcano-like texture (VLT) were fabricated separately on lathe tools' rake faces by laser surface texturing (LST). Various orientations of MGT and different area densities (9% and 48%) and regions (partial and full) of VLT were considered in textured patterns designing. The following orthogonal cutting experiments, machining of aluminum alloy 5038, analyzed tools' performances including cutting force, cutting stability, chip shape, rake face adhesion and abrasion. It indicated that under dry finish cutting conditions, MGT contributed to cutting stability and low cutting forces, meanwhile friction and normal force reduced by around 15% and 10%, respectively with a weak correlation to the grooves' orientation. High density VLT tools, on the other hand, presented an obvious anti-adhesion property. A $5{\mu}m$ reduction of crater wear's depth can be observed on textured rake faces after long length cutting and textured rake faces presented half size of BUE regions comparing to the flat tool, however, once the texture morphologies were filled or worn, the anti-adhesion effect could be invalid. The bearing ratio curve was employed to analysis tool-chip contact and durability of textured surfaces contributing to a better understanding of anti-adhesion and enhanced durability of the textured tools.

• 한국음향학회지
• /
• 제38권4호
• /
• pp.467-475
• /
• 2019

고출력의 초음파는 매질을 진행하면 음향 흐름과 음향 방사힘을 만들어낸다. 공기를 매질로 하는 3차원 공간상에 음향 방사힘을 발생시키면 입체적인 촉감을 형성할 수 있으므로 공간적인 정보를 직접 피부에 촉각으로 전달할 수 있다. 본 논문은 40 kHz의 작은 초음파 송신자 154개를 묶어 오목한 형태로 배열시켜서 초음파를 송신하여 집속초점에서 음향 방사힘을 발생시켰다. 초음파 음장의 초점의 근처에서 음향 방사힘에 의한 촉각을 확인하였다. 촉각 감도를 올리기 위하여 송신 초음파를 60 Hz의 구형파로 진폭 변조를 하였다. 초음파 촉각의 응용으로 음향 방사힘이 형성되는 허공에 촉각이 감지되는 영역을 형성시켜서, 손의 위치를 지정하는 지시자로 사용하였다. 촉각이 감지되는 초점위치에 있는 손의 모양을 영상 입력으로 받아서 손가락의 개수를 기계에 피드백하는 시스템을 구현함으로써 초음파를 이용한 촉각의 유용성을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.368-370
• /
• 2007

AAO(Anodic Aluminum Oxidation) method has been known that it is practically useful for the fabrication of nano-structures and makes it possible to fabricate the highly ordered nano masters on large surface and even on the 2.5 or 3D surface at low cost comparing to the expensive e-beam lithography or the conventional silicon processing. In this study, by using the multi-step anodizing and etching processes, highly ordered nano patterned master with concave shapes was fabricated. By varying the processing parameters, such as initial matter and chemical conditions; electrical and thermal conditions; time scheduling; and so on, the size and the pitch of the nano pattern can be controlled. Consequently, various alumina/aluminum nano structures can be easily available in any size and shape by optimized anodic oxidation in various aqueous acids. The resulting good filled uniform nano molded structure through hot embossing molding process shows the validity of the fabricated nano pattern masters.