• Journal of Korea Multimedia Society
• /
• v.8 no.12
• /
• pp.1605-1612
• /
• 2005

This paper presents the knowledge and experience we obtained by employing multiprocessor systems as a computer simulation design verification to study high-performance computing system. This paper also describes a case study of symmetric multiprocessors (SMP) kernel on a 32 CPUs CC-NUMA architecture using an actual architecture. A small group of CPUs of CC-NUMA, high-performance computer system, is clustered into a processing node or cluster. By simulating the system design verification tools; we discussed SMP OS kernel on a CC-NUMA multiprocessor architecture performance which is $32\%$ of the total execution time and remote memory access latency is occupied $43\%$ of the OS time. In this paper, we demonstrated our simulation results for multiprocessor, high-performance computing system performance, using simulation-based design verification.

• Advances in nano research
• /
• v.13 no.2
• /
• pp.135-146
• /
• 2022

The accurate assessment of the performance of nonuniform systems requires a thorough understanding of stability analysis. As a result, the theoretical modeling of the influence of various variables on the performance of small-scale nonuniform structures with conventional and non-conventional geometries is presented in this paper. According to the fundamental computer simulation based on mathematical and mechanical principles, the stability of the nonuniform structures is examined. Thus, a numerical procedure is used to simulate the stability and instability characteristics of the nonuniform small-scale structures via computer aid. Theoretic simulation methods provide a great deal of the design and production of small-scale structures at a low cost compared to experimental simulations. Thus, this paper provides a good presentation of the stability analysis of the nonuniform nanoscale structures with high accuracy without actual experimental.

• Journal of the Korea Computer Graphics Society
• /
• v.2 no.1
• /
• pp.48-60
• /
• 1996

This paper present a new technique for doing realistic computer animation. The method is based on forward dynamic simulation and nonlinear problem solving (parameter optimization) technique. Objects are modelled physically and simulated faithfully while satisfying kinematic and geometric constraints. This forward dynamic simulation gives us very realistic motions especially for non-voluntary motions. Then we extend simulation technique to do animation using parameter optimization. The basic idea is to add motion control over the entire animation. The motion control is finding optimal solutions while satisfying user's animation goals. We provide two different animation technique; one is for rigid body without joint actuators and the other is for rigid body with linear joint actuators. To achieve motion control, we convert single simulation to single nonliner function evaluation while either setting initial conditions as variables for the function or allocating control variables in terms of time. This method is presented with two animation examples: dice-magic and human stand-up.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1287-1299
• /
• 2023

A new Monte-Carlo-based computer program (RDS-BASIC) is developed to simulate the transport of energetic ions in pure matter. This computer program is utilizing an algorithm that uses detailed numerical solutions for the classical scattering integral for evaluating the outcomes of the binary collision processes. This approach is adopted by several prominent similar simulation programs and is known to provide results with higher accuracy compared to other approaches that use approximations to shorten the simulation time. Furthermore, RDS-BASIC simulation program contains special methods to reduce the displacement energy threshold of surface atoms. This implementation is found essential for accurate simulation results for sputtering yield in the case of very low energy ions irradiation (near sputtering energy threshold) and also successfully solve the problem of simultaneously obtaining an acceptable number of atomic displacements per incident ions. Results of our simulation for several irradiation systems are presented and compared with their respective TRIM (SRIM-2013) and the state-of-the-art SDTrimSP simulation results. Our sputtering simulation results were also compared with available experimental data. The simulation execution time for these different simulation programs has also been compared.

• Journal of the military operations research society of Korea
• /
• v.25 no.1
• /
• pp.199-214
• /
• 1999

The Constructive Battle Simulation Model is very important to the recent military training for the substitution of the field training. However, real battlefield systems operate under real-time conditions, they are inherently distributed, concurrent and dynamic. In order to reflect these properties by the computer-based simulation systems which represent real world processes, we have been developing constructive simulation model for several years. Conventionally, scheduling and resource allocation activities which have timing constraints, we elaborated on these issues and developed the simulation system on commercially available hardware and operating system with lock-free resource allocation scheme and rate monotonic scheduling.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.39 no.4
• /
• pp.197-199
• /
• 2013

Three-dimensional (3D) computed tomography image models are helpful in reproducing the maxillofacial area; however, they do not necessarily provide an accurate representation of dental occlusion and the state of the teeth. Recent efforts have focused on improvement of dental imaging by replacement of computed tomography with other detailed digital images. Unfortunately, despite the advantages of medical simulation software in dentofacial analysis, diagnosis, and surgical simulation, it lacks adequate registration tools. Following up on our previous report on orthognathic simulation surgery using computer-aided design/computer-aided manufacturing (CAD/CAM) software, we recently used the registration functions of a CAD/CAM platform in conjunction with surgical simulation software. Therefore, we would like to introduce a new technique, which involves use of the registration functions of CAD/CAM software followed by transfer of the images into medical simulation software. This technique may be applicable when using various registration function tools from different software platforms.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.8
• /
• pp.96-103
• /
• 2008

In this study, we performed the biomechanical analysis of cervical plate systems by using a computer simulation based on finite element method to derive reliable model by analysis of design variables and fatigue behavior. To simulate the cervical spine movement in-vivo state by surgery, we modeled the cervical plate system which consisted of screws, rings, rivets, and plate and Ultra High Molecular Weight Polyethylene (UHMWPE) Block. The experiment of cervical plate system followed the ASTM F1717 standards that covered the materials and methods for the static and fatigue testing. The result of computer simulation is compared with experimented test. We expected this study is to derive reliable results by analysis of design variables and fatigue behavior for developing a new model.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.819-824
• /
• 1997

This paper presents a cell-based motion control strategy for soccer playing mobile robots. In the central robot motion planner, the planar ground is divided into rectangular cells with variable sizes and motion indices to which direction the mobile robot should move. At every time the multiple objects-the goal gate, ball, and robots-detected, integer values of motion indices are assigned to the cells occupied by mobile robots. Once the indices being calculated, the most desirable state-action pair is chosen from the state and action sets to achieve successful soccer game strategy. The proposed strategy is computationally simple enough to be used for fast robotic soccer system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.344-353
• /
• 2008

To apply the appropriate new grounding system to domestic power system, safety has to be guaranteed under the given circumstances. It is not possible to decide the safety of grounding systems by the experimental test because safety experiments directly relate to the human life and the installed electric machines. Therefore, the computer simulation program to decide the safety of grounding systems based on the IEC standard systems, has to be developed. This paper proposes the computer simulation based method to decide the safety of grounding system with the concepts of touch voltage, step voltage, human resistivity, and applied electric current according to the several conditions of human body located in the corresponding grounding systems. The proposed method is implemented by Matlab/Simulink and Visual C++ programming tools for its visualization.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.354-358
• /
• 2001

Cosim (Hardware and Software Co-Simulator) is a JavaBeans-based simulation tool fur validating systems architecture and estimating performance of web applications. Cosim has four components: Modeler, Translator, Engine and Scenario. Users start from Modeler to describe systems architecture in UML(Unified Modeling Language) deployment diagram, and then specify hardware & software performance parameters such as execution delay, network topology, and frame size. All information specified on Modeler are sent to Translator, and then automatically converted to Java programs. Scenario is responsible to run the Java program and produce results in text reports and graphs. Developers can reduce development time and cost by validating systems architecture of web applications before the actual deployment.