• Journal of the Korea Concrete Institute
• /
• v.21 no.6
• /
• pp.753-761
• /
• 2009

This paper presents the test results of total 24 beam-end specimens to investigate the effect of high-strength concrete and cover thickness on the development resistance capacity in tensile lap splice length regions. Based on bond characteristics that an increase in concrete strength results in higher bond stress and shortening of the transfer length, cracking behavior that thin cover thickness induced a splitting crack easily and brittle crack propagation, current design code that development length provisions as uniform bond stress assumption was investigated apply as it. The results showed that as higher strength concrete was employed, not only development resistance capacity was influenced by cover thickness, but also more sufficient safety factor reserved shorter than the lap splice length provision in current design code. From experimental research results, high-strength concrete development length was not inverse ratio of $\sqrt{f_{ck}}$ but directly inverse of $f_{ck}$, and it is also said that there is a certain limit length of the embedded steel over which the assumption of uniform bond stress distribution is valid specially for high-strength concrete not having a same embed length such as normal-strength concrete in current design criteria hypothesis.

• Journal of Korea Game Society
• /
• v.10 no.6
• /
• pp.125-135
• /
• 2010

Body motions are commonly used to express emotions in virtual characters based on body parts, which are frequently employed in games. For this purpose, it is necessary to create different types of animations corresponding to the emotions shown by virtual characters. Therefore, a large of number of animations should be created for different gestures depending on the level of human emotion. In this paper, we propose a method for displaying gestures with various degrees of complexity on the basis of the level of emotion in virtual characters. In particular, this method can be used to display passive and exaggerated expressions by adding weighted values to the frames that rotate the characters to make them show different gestures depending on the level of emotion. To verify the effectiveness of the proposed method, we use the Emotional Animation Tool (EATool), with which body-weighted values can be applied to the actual or virtual characters. After assigning different emotions to walking motions in the newly developed environment, we apply different body-weighted values depending on the level of each emotion. The results of a comparative test reveal that a given type of walking motion differs with the level of emotion.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.121-126
• /
• 2017

Recently, a lot of people use touch-pen devices such as smart phones and tab computers. To generate the picture and text, a user can give input or control the touch-pen device through simple or multi-touch gestures by touching the screen with a special stylus pen and/or one or more fingers. The accuracy and response time from the moment of contact with the touch board is very important to the touch device. Therefore, research is needed to find a way of removing the noise included in the touch signal quickly and efficiently. In this paper, we propose a method for removing a noise mixed in with a touch point coordinate which has been caused by a input pen on the touch screen. For effective filtering, the fast sampling of the coordinate corresponding to the noise from the input signal is required primarily. Secondly the total compensation of the touch coordinates using the characteristics of the B-Spline curve is applied to correct coordinates of the points. This method can ensure a real-time response than other algorithms. The applied performance evaluation method is comparing error pixels with evaluation values by dividing 10 intervals on the touch pad diagonally. Usually the average error is 7.1 pixels but our proposed method shows an average 4.1 errors. Therefore, our proposed touch pen method can express the input signal on the coordinates more correctly.

• Journal of the Economic Geographical Society of Korea
• /
• v.9 no.3
• /
• pp.379-395
• /
• 2006

The purpose of this study is to analyze the spatial characteristics of travel patterns and travel behaviors of transit users in the Metropolitan Seoul area. We apply the data mining techniques to explore the travel patterns of transit users from the T-money card database which has been produced over 10,000,000 transaction records per day. The database contains the information of locations and times of origin, transfer, and destination points for each transaction as well as the informations of transit modes taken via the transaction. We develop an data mining algorithm to explore traversal patterns from the enormous information. The algorithm determines the travel sequences of each passenger, and produce the volumes of support on each points (stops) of transportation networks in the Metropolitan Seoul area. In order to visualize the spatial patterns of travel demands for transit systems we apply GIS techniques, and attempt to investigate the spatial characteristics of travel patterns and travel demand. Subway stops located in the Gangnam area appear the highest peak for the travel origin and destination, while the CBD in the Gangbuk stands at the second position. Two or three sub-peaks appear at the densely populated residential areas developed as the high-rise apartment complex. Subway stations located along the Subway Line 2, especially from Guro to Samsung receive heavy travel demand (total support), while bus stops located at the CBD in the Gangbuk stands the highest travel demand by bus.

• Journal of Korean Academy of Nursing
• /
• v.20 no.3
• /
• pp.281-299
• /
• 1990

The organization of nursing department Significantly effects the hospital management. Especially, The head nurse is one of the most important position because head nurse is a first-line manager in the hospital level, a middle manager in nursing service organizations level and the top manager in each nursing unit level. This study was attempted to show the ideal model and nile by compare head nurses' role perception with staff nurses' role expectation according to two types of hospital. The survey was conducted among 94 head nurses and 233 staff nurses who are working at 5 different University Hospitals over 600 beds and 93 head nurses and 218 staff nurses Who are working at 12 different General Hospitals between 100∼300 beds in Seoul. The data was collected in a period from 8th September to 13th October in 1989 and the instrument used for this study was based on Han's one and reffered back to many literary sources and revised. The collected data was analysed by computer using S.P.S.S. program as a Mean, Percentage, Cronbach's alpha, Chi-Square, t-test and ANOVA. 1. The study was compared to the difference of the two subject group's general characteristics according to a type of hospital. As a relult, there were significant differences in age, educational background and career. 2. This Study was compared to the difference of the two subject group's role perception and role expection about each question according to a type of hospital. The result of this comparisons as follows : First, These were the most important issue between both groups : “Head nurse has to know about her staff's events and problems and then help them to solve that promptly.” Second, These were the least important issue between both groups : “Head nurse has an interview with patient's family and visitors”, “Head nurse is interested in her staff's privacy.” 3. This study was compared to the differences of each role areas according to a type of hospital. As a result, there were no significant differences both two subject groups except nursing manager role in staff nurses' group(t＝-2.893, df＝449.0, p＝0.004). 4. This study was tested to the difference of the two subject groups according to general characteristics. As a result, All of that there were no significant differences.

• Journal of Korean Academy of Nursing
• /
• v.15 no.3
• /
• pp.74-80
• /
• 1985

This study was attempted to identify the difference between body image of the patients with lower limb fracture and that of normal persons, and to examine if supportive group care could offer an apportunity for positive change in body image of the patient with lower limb fracture under the Quasi-experimental design. The subjects for this study were obtained by ta-king convenient sample of soldiers; the experimental group were 44 lower limb fractured patients hospitalized on the orthopedic Surgery unit in S Army General Hospital, while the control group were 44 normal enlisted men serving in the B Army regiment. Supportive group nursing care was given to the lower limb fractured patients who belong to the experimental group. Pre-and post-tests were administered to the experimental and the control group. The instruments to measure body image of the subjects were body Cathexis Scale developed by Scord and Jourard (1953) and Body Meaning Scale dove-loped by the reseacher. The reliability coefficients by Cronhach's u-test were .95 in body Cathexis Scale and .89 in Body Meaning Scale in this study. Data for this study were collected over a period 12 days from the 12th to the 24th of October, 1984 by the questionnaire. Data were analyzed by computer. Frequency, Percentage and x²-test were used to examine general chacteristics of the subjects. t-test was used to analyze the hypotheses. Analysis of variance was used to test difference in body image between groups classified by the general characteristics. Pearson Correlation Coefficient was used to identify the correlation between Body Cathexis Scale and Body Cathexis Scale and Body Meaning Scale. The results of this study were as follows: 1. No significant difference was found between the experimental and the control group on general characteristics of the subjects (p> .05). 2. Hypothesis I:“There will be a difference in body image between patiens with lower limb fracture and normal persons,”was supported(Body Cathexis t=6.91, p<.001, Body Meaning t=5.66, p< .001). 3. Hypothesis Ⅱ;“The will be a difference in body image of patients with lower limb fracture bet-ween after and before, supportive group nursing care was provided,”was supported (Body Cathexis t=5.90, p<.001, Body Meaning t=4.45, p <.001). 4. There was no significant difference in body image between groups classified by the general characteristics (p> .05). 5. The correlation between Body Cathexis Scale and Body Meaning Scale: It was reported that Body Cathexis Scale correlated with Body Meaning Scale in total subjects of the experimental and control group (r=.744, p<.001). That is, there was relatively high correlation between two scales. body Cathexis Scale correlated with Body Meaning Scale in the experimental group(r=.738, p <.001) and in the control group (r=.352, p <.001). That is, there was more than moderate correlation between two scales. In conclusion, it was found that there was a difference in body image between patients with lower limb fracture and normal persons, and supportive group nursing care offered an opportunity for positive change in body image of the patient with lower limb fracture.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.203-212
• /
• 2019

Along with the recent fourth industrial revolution, the world's manufacturing powerhouses are pushing for national strategies to revive the sluggish manufacturing industry. Moon Jae-in, the government is in accordance with the trend, called 'advancement of science and technology is leading the fourth round of the Industrial Revolution' strategy. Intelligent information technology such as IoT, Cloud, Big Data, Mobile, and AI, which are key technologies that lead the fourth industrial revolution, is promoting the emergence of new industries such as robots and 3D printing and the smarting of existing major manufacturing industries. Advances in technologies such as smart factories have enabled IoT-based sensing technology to measure various data that could not be collected before, and data generated by each process has also exploded. Thus, this paper uses data generators to generate virtual data that can occur in smart factories, and uses them to analyze the cause of the defect in real time and to predict the replacement cycle of the facility.

• The KIPS Transactions:PartA
• /
• v.9A no.3
• /
• pp.387-398
• /
• 2002

As whole genome sequences of many organisms have been revealed by small-scale genome projects, the intensive research on individual genes and their functions has been performed. However on-memory algorithms are inefficient to analysis of whole genome sequences, since the size of individual whole genome is from several million base pairs to hundreds billion base pairs. In order to effectively manipulate the huge sequence data, it is necessary to use the indexed data structure for external memory. In this paper, we introduce a workbench system for analysis and visualization of whole genome sequence using string B-tree that is suitable for analysis of huge data. This system consists of two parts : analysis query part and visualization part. Query system supports various transactions such as sequence search, k-occurrence, and k-mer analysis. Visualization system helps biological scientist to easily understand whole structure and specificity by many kinds of visualization such as whole genome sequence, annotation, CGR (Chaos Game Representation), k-mer, and RWP (Random Walk Plot). One can find the relations among organisms, predict the genes in a genome, and research on the function of junk DNA using our workbench.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.10-24
• /
• 2013

The state-of-arts of multiscale simulation (MSS) in science and engineering is briefly presented and MSS for process development (PD-MSS) is proposed to effectively apply the MSS to the process development. The four-level PD-MSS is composed of PLS (process-level simulation), FLS (fluid-level simulation), mFLS (microfluid-level simulation) and MLS (molecular-level simulation). Characteristics and methods of each level, as well as connectivity between the four levels are described. For example in PD-MSS, absorption column, fluidized-bed reactor, and adsorption process are introduced. For successful MSS, it is necessary to understand the multiscale nature in chemical engineering problems, to develop models representing physical phenomena at each scale and between scales, to develop softwares implementing mathematical models on computer, and to have strong computing facilities. MSS should be performed within acceptable accuracy of simulation results, available computation capacity, and reasonable efficiency of calculation. Macroscopic and microscopic scale simulations have been developed relatively well but mesoscale simulation shows a bottleneck in MSS. Therefore, advances on mesoscale models and simulation tools are required to accurately and reliably predict physical phenomena. PD-MSS will find its way into a sustainable technology being able to shorten the duration and to reduce the cost for process development.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.113-123
• /
• 2012

Recently, various attempts have been made to apply Intelligent Transportation System under various environments and conditions. Consequently, an accurate license plate recognition regardless of vehicle location and viewing angle is required. In this paper, we propose a novel license plate recognition system which exploits a) the format of license plates to remove false candidates of license plates and to extract characters in license plates and b) the characteristics of Hangul for accurate character recognition. In order to eliminate false candidates of license plates, the proposed method first aligns the candidates of license plates horizontally, and compares the position and the shape of objects in each candidate with the prior information of license plates provided by Korean Ministry of Construction & Transportation. The prior information such as aspect ratio, background color, projection image is also used to extract characters in license plates accurately applying an improved local binarization considering luminance variation of license plates. In case of recognizing Hangul in license plates, they are initially grouped according to their shape similarity. Then a super-class method, a hierarchical analysis based on key feature points is applied to recognize Hangul accurately. The proposed method was verified with high recognition rate regardless of background image, which eventually proves that the proposed LPR system has high performance regardless of the vehicle location or viewing angle.