• Journal of the Korean Society of Industry Convergence
• /
• v.1 no.2
• /
• pp.13-19
• /
• 1998

A computer simulation program for the design of furnace witjin pakaged water-tube boilres is developed and the developed computer program is successfully applied to design the furnace for packaged water-tube boiler. The model by experiment and the model by Hottel are used to predict the exit gas temperature of furnace. The result by two models is discussed and is shown that in the case of constant cross section in furnace, the result is same but in changing the configuration of cross section, the difference by two models is not small.

• Journal of electromagnetic engineering and science
• /
• v.5 no.4
• /
• pp.189-192
• /
• 2005

The measurement of unique rainfall phenomenon and rain attenuation on 38 GHz terrestrial links at South Korea in 1998 is presented. It was one of the most severe rainfall years at the measured region due to increased EI Nino signal. The rainfall rate exceeded at $0.01\%$ was 97.4 mm/h during a worst month and annual rate was 63.5 mm/h. Experimentally measured results have been compared with some models and found that the rain attenuation by system level was underestimated by the existing prediction models. As it was measured only three months, further study and measurement of rainfall and rain attenuation in this region are needed for stable millimeter-wave system operation at all times.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.4
• /
• pp.471-480
• /
• 2004

A estimating capability of software effort, duration and cost is based on accurate size estimate of the software to be developed. A simplified function point (FP) approach to software size estimation is described, which first skip the computation step for value adjustment factor, thus directly obtaining final adjusted FP from unadjusted FP. The research seeks suitable models based on statistical regression models in the context of case study based on 783 software projects. The approach also are built for subsets of projects using new development, enhancement and re-development types.

• Journal of the Korea Computer Graphics Society
• /
• v.12 no.1
• /
• pp.21-25
• /
• 2006

This paper proposes a real-time simulation technique for thin shells undergoing large deformation. Thin shells are almost two-dimensional structures visually well approximated as surfaces, such as leaves, paper sheets, hats, aluminum cans. Unfortunately accurate simulation of these structures requires one of the most complex formulations in continuum mechanics, shell theory [4]. Moreover, there has not yet been any work reported to produce visually convincing animation of them while achieving real-time performance. Motivated by discrete shells [5] and modal warping [3], we formulate dynamics of thin shells using mass-spring models instead of finite element models, and then apply the modal warping technique to cope with large rotational deformation of thin shells. Experiments show that the proposed technique runs in real-time, and that it can simulate large bending and/or twisting deformations with acceptable realism.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.1
• /
• pp.84-90
• /
• 2000

The importance of Virtual Manufacturing System is increasing in the area of developing new manufacturing processes, implementing automated workcells, designing plant facility layouts and workplace ergonomics. Virtual manufacturing system is a computer system that can generate the same information about manufacturing system structure, states, and behaviors as is observed in a real manufacturing. In this research, a virtual manufacturing system for flexible manufacturing cells (VFMC), (which is a useful tool for building Computer Integrated Manufacturing (CIM), has been developed using object-oriented paradigm, and implemented with software QUEST/IGRIP. Three object models used in the system are the product model, the facility model, and the process model. The concrete behaviors of a flexible manufacturing cell are re[presented by the task-oriented description diagram, TIC. An example simulation is executed to evaluate applicability of the developed models, and to prove the potential value of virtual manufacturing paradigm.

• International Journal of Contents
• /
• v.9 no.1
• /
• pp.18-25
• /
• 2013

Recently, augmented reality has been proved immensely useful on a day to day basis when tied with location-based technology. In this paper, we present a new method for displaying augmented reality contents on mobile devices. We add 3D models on the view of the camera and use location-based services, motion sensors to calculate the transformation of models. Instead of remaining at a fixed position on camera view while moving around a 3D model, the model rotates on display in the opposite direction that the user is walking. We also design client as a ubiquitous client to reduce constraints on disk space and memory capacity on mobile devices. Implementation results show effective use in creating GPS-based 3D view augmented reality contents for Smart Mobile Devices.

• Journal of information and communication convergence engineering
• /
• v.10 no.4
• /
• pp.411-419
• /
• 2012

This paper proposes a semi-automatic image-based approach for 3-dimensional (3D) modeling of buildings along streets. Image-based urban 3D modeling techniques are typically based on the use of aerial and ground-level images. The aerial image of the relevant area is extracted from publically available sources in Google Maps by stitching together different patches of the map. Panoramic images are common for ground-level recording because they have advantages for 3D modeling. A panoramic video recorder is used in the proposed approach for recording sequences of ground-level spherical panoramic images. The proposed approach has two advantages. First, detected camera trajectories are more accurate and stable (compared to methods using multi-view planar images only) due to the use of spherical panoramic images. Second, we extract the texture of a facade of a building from a single panoramic image. Thus, there is no need to deal with color blending problems that typically occur when using overlapping textures.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.235-238
• /
• 2019

In real world object detection is an active research topic for understanding different objects from images. There are different models presented in past and had significant results. In this paper we are presenting vehicle logo detection using previous object detection models such as You only look once (YOLO) and Faster Region-based CNN (F-RCNN). Both the front and rear view of the vehicles were used for training and testing the proposed method. Along with deep learning an image pre-processing algorithm called perspective transformation is proposed for all the test images. Using perspective transformation, the top view images were transformed into front view images. This algorithm has higher detection rate as compared to raw images. Furthermore, YOLO model has better result as compare to F-RCNN model.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2897-2899
• /
• 2005

Finite element method (FEM) has been widely used as a useful numerical method that can analyze complex engineering problems in electro-magnetics, mechanics, and others. CEMTool, which is similar to MATLAR, is a command style design and analyzing package for scientific and technological algorithm and a matrix based computation language. In this paper, we present new 3D FEM package in CEMTool environment. In contrast to the existing CEMTool 2D FEM package and MATLAB PDE (Partial Differential Equation) Toolbox, our proposed 3D FEM package can deal with complex 3D models, not a cross-section of 3D models. Consequently, with our new 3D FEM toolbox, we can analyze more diverse engineering Problems which the existing CEMTool 2D FEM package or MATLAB PDE Toolbox can not solve.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.327-329
• /
• 2009

In a network, broadcasting is the dissemination of a message from a source node holding a message to all the remaining nodes through a call. This letter proposes a one-to-all broadcasting algorithm in the Petersen-torus network PT(n, n) for the single-link-available and multiple-link-available models. A PT(n, n) is a regular network whose degree is 4 and number of nodes is $10n^2$, where the Petersen graph is set as a basic module, and the basic module is connected in the form of a torus. A broadcasting algorithm is developed using a divide-and-conquer technique, and the time complexity of the proposed algorithm approximates n+4, the diameter of PT(n, n), which is the lower bound of the time complexity of broadcasting.