• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.453-458
• /
• 2017

Computed Tomography (CT) provides information on the Diagnostic Reference Level Computed Tomography Dose Index (CTDI) and Dose Length Product (DLP) for accurate diagnosis of patients. However, it does not provide a dose change according to the table height for the diagnostic reference level provided by the CT equipment. The purpose of this study was to evaluate the image and dose according to the table height change using phantom (PMMA: Polymethyl Methacrylate) in order to find the optimal image and the minimum dose during computed tomography examination. When examining using a 32 cm PMMA phantom with the same thickness as the abdomen of an adult, there was little change in dose with table height. However, the noise evaluation of the image caused a high fluctuation of noise depending on the table height. and in the case of the 16 cm PMMA phantom, the change of the noise was small, but the dose change was about 30%. In conclusion, the location of the patient and the center of the detector are important during computed tomography (CT) examinations. In addition, table height setting is considered to be important for examinations with optimized image and minimum dose.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.5
• /
• pp.90-97
• /
• 2014

This paper presents a simplified dynamics model, dynamics simulations, and computed torque control experiments of the Delta high-speed parallel robot. Using the typical Newton-Euler method, a simplified but accurate dynamics model with practical assumptions is derived. Accuracy and fast calculations of the dynamics are essential in the computed torque control for high-speed applications. It was found that the simplified dynamics equation is in very god agreement with the ADAMS model, and the calculation time of the inverse kinematics and inverse dynamics is about 0.04 msec. From the dynamics simulations, the cycle trajectory along the y-axis requires less peak motor torque and a lower angular velocity and less power than that along the x-axis. The computed torque control scheme can reduce the position error by half as compared to a PD control scheme. Finally, the developed Delta parallel robot prototype, half the size of the ABB Flexpicker robot, can achieve a cycle time of 0.43 sec with a 1.0kg payload.

• Steel and Composite Structures
• /
• v.37 no.4
• /
• pp.463-479
• /
• 2020

Currently, there are many lateral resisting systems utilized in resisting lateral loads being produced in an earthquake. Such systems can significantly reduce the roof's displacement when placed at an optimum location. Since in the design of tall buildings, the minimum distance between adjacent buildings is important. In this paper, the critical excitation method is used to determine the best location of the belt truss system while calculating the minimum required distance between two adjacent buildings. For this purpose, the belt truss system is placed at a specific story. Then the critical earthquakes are computed so that the considered constraints are satisfied, and the value of roof displacement is maximized. This procedure is repeated for all stories; i.e., for each, a critical acceleration is computed. From this set of computed roof displacement values, the story with the least displacement is selected as the best location for the belt truss system. Numerical studies demonstrate that absolute roof displacements induced through critical accelerations range between 5.36 to 1.95 times of the San Fernando earthquake for the first example and 7.67 to 1.22 times of the San Fernando earthquake for the second example. This method can also be used to determine the minimum required distance between two adjacent buildings to eliminate the pounding effects. For this purpose, this value is computed based on different standard codes and compared with the results of the critical excitation method to show the ability of the proposed method.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.6
• /
• pp.47-59
• /
• 2016

As the usage of sun tracking system in solar energy utilization facility increases, requirement of more accurate computation of sun position has also been increased. Accordingly, various algorithms to compute the sun position have been proposed in the literature and some of them insist that their algorithms guarantee less than 0.01 degree computational error. However, mostly, the true meaning of accuracy argued in their publication is not clearly explained. In addition to that, they do not clearly state under what condition the accuracy they proposed can be guaranteed. Such ambiguity may induce misunderstanding on the accuracy of the computed sun position and ultimately may make misguided notion on the actual sun tracking system's sun tracking accuracy. This work presents some comments related to the implementation of sun position computational algorithm for the sun tracking system. We first introduce the algorithms proposed in the literature. And then, from sun tracking system user's point of view, we explain the true meaning of accuracy of computed sun position. We also discuss how to select the proper algorithm for the actual implementation. We finally discuss how the input factors used in computation of sun position, like time, position etc, affect the computed sun position accuracy.

• Archives of Plastic Surgery
• /
• v.34 no.6
• /
• pp.719-723
• /
• 2007

Purpose: Blowout fracture can lead to functional impairments and esthetic deformities such as impairment of ocular movement, diplopia, visual loss and enophthalmos. The object of this study is to present a classification and its analysis according to the computed tomographic scan in blowout fractures. We classified blow out fractures into three types according to the anatomical location of fracture, the size of the bone defect and the degree of periosteal injury by using the computed tomography scan. Each progress and complications were analyzed more than mean 1 year. Methods: Among the 155 cases during 4 years, there were 11 cases of medial orbital wall fracture, 97 cases of inferior orbital wall fracture, 47 cases of combined type. The mean age of patients was 31.2 years, ranged from 8 to 84 years. Results: According to our classification, surgical treatments through the nasoendoscopic approach, the subciliary approach, the transconjunctival approach or their combinations were performed in 116 patients, and conservative treatments were done in 46 patients. Presurgical clinical findings of diplopia, impairment of ocular movement, enophthalmos of more than 2 mm were present in 62 patients. After surgical treatment, clinical findings were remained in 7 patients. Conclusion: We think that our classification according to computed tomographic scan is helpful for the indication and it may decrease the complications such as impairment of ocular movement, diplopia, visual loss and enophthalmos.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.6
• /
• pp.523-527
• /
• 2011

A 67-year-old woman presented for evaluation of severe coccygeal pain. The computed tomography scans and magnetic resonance imaging showed an asymmetric midline sacral tumor invading the right lower portion of S2. To preserve both S2 nerve roots and to obtain negative surgical margins, a modified mid-sacrectomy with an aid of a computed navigation system was performed. The sacral tumor was excised en bloc with negative tumor margins. Both S2 nerve roots were preserved and additional reconstruction was not necessary because of minimal resection of the sacroiliac joint. We report a case of a sacral chordoma which was excised en bloc with adequate surgical margins by a computer-assisted modified mid-sacrectomy. The computed navigation system may be a useful tool for tumor targeting and safe osteotomies in sacral tumor surgery via the posterior only approach.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.4
• /
• pp.263-270
• /
• 1993

A study on the variation of radiation stress and mean water level is carried out for the shoaling and breaking waves on a plane beach. In general, the radiation stresses computed based on the linear wave theory are overestimated. which results in the discrepancy between the computed results and laboratory data of mean water level in the surf zone. In this paper, by modifying the Svendsen's approach (1984), radiation stress is expressed in terms of water depth. The computed results are compared with the results calculated by a linear wave theory and Sawaragi's approach (1984) based on the spectrum of breaking wave components, and published laboratory data. The computed results of the modifed Svendsen's approach are favourably compared with the laboratory data.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.18 no.1
• /
• pp.67-73
• /
• 1988

This study was performed to clarify the mechanism of clicking sound and locking on temporomandibular joint and to determine the radiographic findings of them by using computed tomogram. Through the preliminary study with cadavers, the proper scanning condition and the correlatonship between the anatomy of cadaver and computed tomogram had been determined. The subjects were consisted of 10 controls and 16 patients having clicking sound or locking on temporomandibular joint. By using Hitachi-W500 as computed tomographic device, direct axial views and sagittal views reformed according to the changes in window setting and using the non-linear fraction were taken and analyzed by visual method and measuring the attenuation numbers. The obtained results were as follows: 1. The density of the anterior band of meniscus showed isodense to the surrounding muscles in normal. 2. In patient group, affected side showed increased radiopaque area anterior to condyle and underneath articular eminence as the feature of anteriorly displaced meniscus on axial and sagittal views. 3. In patient group, the condyle was rotated postero-laterally in affected side. 4. Non-linear fraction highlightened the feature of anteriorly displaced meniscus.

• Journal of Magnetics
• /
• v.20 no.3
• /
• pp.302-307
• /
• 2015

The purpose of the study was to identify how isotope and magnetic resonance imaging (MRI) contrast media impact on noise to computed tomography (CT) examination. For the study, divide the phantoms to two groups: 1) saline, saline + different kinds of contrast agent without $^{99m}Tc$ administration; 2) $^{99m}Tc$ administration: saline, saline + different kinds of contrast agent with $^{99m}Tc$ administration. CT contrast agent was used for Iopamidol$^{(R)}$ and Dotarem. And MRI contrast agent was used for Primovist$^{(R)}$ and Gadovist$^{(R)}$. To obtain an image, we used CT scanner. With an obtained image, we set the $1cm^2$ region of interest in the middle of bottle to measure the noise and CT number. As a result, there was no difference in CT number before and after inserting $^{99m}Tc$ into all contrast media including Normal Saline. However, when it comes to Noise, there was a difference before and after inserting $^{99m}Tc$ into every contrast media except MRI contrast media such as Primovist$^{(R)}$ and Gadovist$^{(R)}$.

• Korean Journal of Veterinary Service
• /
• v.42 no.4
• /
• pp.279-283
• /
• 2019

An 8-year-old castrated male Korean short hair cat was referred with chronic vomiting, diarrhea, and anorexia. The cat was diagnosed with alimentary lymphoma via fine needle aspiration. Three weeks later, he was presented again with anorexia. Hepatomegaly and hyperechoic change in the liver parenchyma were observed. Computed tomography while awake was performed and revealed hypoattenuation of the hepatic parenchyma. The cat was tentatively diagnosed with feline hepatic lipidosis secondary to alimentary lymphoma. In the feline patient with lymphoma, hepatomegaly is important to differentiate hepatic lipidosis from hepatic infiltration of lymphoma on liver. In the present case, fatty infiltration of the liver was identified via non-invasive, rapid, and convenient computed tomography examination in an awake cat with a lymphoma.