• 동력기계공학회지
• /
• 제21권6호
• /
• pp.40-45
• /
• 2017

The objective of this study is the finite element-transfer stiffness coefficient method, which is the combination of the modeling technique of finite element method and the transfer technique of transfer stiffness coefficient method, is applied in the static analyses of two dimensional curved beam structures. To confirm the effectiveness of the applied method, two computational models are selected and analyzed by using finite element method, finite element-transfer stiffness coefficient method and exact solution. The computational results of the static analyses for two computational models using finite element-transfer stiffness coefficient method are equal to those using finite element method. When the element partition number of curved beam structure is increased, the computational results of the static analyses using both methods approach the exact solution. We confirmed that the finite element-transfer stiffness coefficient method is superior to finite element method when the number of the curved beam elements is increased from the viewpoints of the computational speed and the utility of computer memory.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.42.6-43
• /
• 2008

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.37.5-37.5
• /
• 2008

• 신재생에너지
• /
• 제4권4호
• /
• pp.30-36
• /
• 2008

The possibility of whether the induced wind from a vehicle traveling on highway can be used in wind power generation has been verified through computational flow analysis. The bus which is presumed to accompany relatively strong and wide range of induced wind compared to passenger vehicles because of its wide frontal area has been set as the subject of research. In order to ensure the reliability of research, the flow analysis surrounding the bus on a flat road where median strip is not installed has been compared with a preceding research while the validity of grid system and interpretation method used in this research have been assured by a qualitative method. In case of the median strip type wind power generator system, because it has been verified that a strong streamwise wind speed (5 m/s) is derived from the contraction effect of flow passage between the bus and the median strip while maintaining a relatively consistent upwind wind speed (1.4 m/s) in vertical direction in the wake area after the bus passes by although the change of wind speed is intense, it was decided as having some possibility of wind power generation. In case of the traffic sign panel type wind power generator system installed at the upper top of highway, because the wind speed of 2 m/s level has been derived for a limited time only at a section equal to the length of the bus and a faint induced wind speed less than 0.5 m/s was shown at other regions, it was decided as having almost no possibility of wind power generation.

• 한국CDE학회논문집
• /
• 제17권2호
• /
• pp.140-148
• /
• 2012

This study aims to provide power monitoring system for super tall buildings with 3D BIM (Building Information Modeling) technology. In order to realize this subject, standard specifications for BIM objects and attributes were studied through analyzing processes and elements of electrical utilities for power management systems applied for super tall buildings. These standard BIM specifications could be used by designers, contractors and facility operators, and thus could be helpful to realize BIM information sharing between multiple disciplines and construction phases. And further study has been suggested to develop standard specification and applications from this study.

• 한국전산유체공학회지
• /
• 제10권3호
• /
• pp.63-69
• /
• 2005

The COMS, the first meteorological geostationary satellite in Korea, is under development by KARI. The radiator size and the heater power for the thermal control of COMS are calculated using an analytic method. The total radiator area of $4.85\;m^2$ and the total heater power of 794.77 W are determined at a conceptual design of COMS. The commercial software, SINDA and TRASYS, are utilized in order to compare and verify the analytic results. The results of on-orbit numerical simulation of cold and hot cases show that the radiator size and heater power obtained from the analytic method are appropriate to maintain COMS equipments within required temperature ranges.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.299-301
• /
• 2008

For an efficient operation of today's power system, power engineers are required to analyze enormous amount of data. Owing to the development of technology, a variety of power systems computational tools have been developed and commercialized. However, the practical use of computational tools not only requires that people be able to understand the results the tools produce but also extract the required information from the simulation results which generally involves massive amount of information. This paper introduces a novel interface that would complement the drawbacks in the visualization of data of the pre-existing tools and assist the user in readily retrieving the required information, in this case the rotor angle data, of the simulated system thereby making power system analysis more feasible to be effectuated.

• 한국CDE학회논문집
• /
• 제6권2호
• /
• pp.140-146
• /
• 2001

A nuclear Power Plant is composed of a number of mechanical components. Maintaining the integrity of these components is one of the most critical issues in nuclear industry. In order to evaluate the integrity of these mechanical components, a lot of data are required including inspection data, geometrical data, material properties, etc. Therefore, an effective database system is essential to manage the integrity of nuclear power plant. For this purpose, an internet based virtual reality environment and web database system was proposed. The developed virtual reality environment provides realistic geometrical configurations of mechanical components using VRML (Virtual Reality Modeling Language). The virtual reality environment was linked with the web database, which can manage the required data for the integrity evaluation. The proposed system is able to share the information regarding the integrity evaluation through internet, and thus, will be suitable for an integrated system for the maintenance of mechanical components.

• 대한전자공학회논문지TC
• /
• 제44권2호
• /
• pp.37-45
• /
• 2007

본 논문에서는 격자형태의 파일롯 배치를 사용하는 시분할 양방향통신 OFDM 시스템에서 잔류 시간동기 오차를 제거하는 효율적인 방법을 제시한다. OFDM 시스템에서 잔류 시간동기 오차는 채널추정의 성능을 저하시키는 원인이 되고, 이것을 제거하는 많은 알고리듬이 제안되고 있다. 그 중에서, 위상 전처리 및 후처리 보상 기법은 잔류 시간동기 오차의 영향을 효과적으로 제거하여 우수한 성능을 보이지만, 많은 전력소모를 가져오는 단점이 있다. 따라서, 본 논문에서는 FFT 윈도우의 시작위치를 조정함으로써 적은 계산량으로도 잔류 시간동기 오차를 효과적으로 제거할 수 있는 방법을 제시하고자 한다. 성능검증을 위해, 본 논문에서는 제안된 기법을 IEEE 802.16e 표준에 적용하여 추가적으로 요구되는 계산량과 전력소모를 기존의 보상방법과 비교한다. 성능분석 결과 제안된 방식은 기존 방식과 유사한 성능을 보이면서도 전력소모 측면에서는 기존 방식의 4.9% 만의 전력을 소비하는 것으로 나타나, 전력소모가 무엇보다도 중요한 이동통신 시스템에 매우 적합한 것으로 판단된다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.77-80
• /
• 2006