• 한국컴퓨터정보학회논문지
• /
• 제24권11호
• /
• pp.179-185
• /
• 2019

이 연구는 심폐소생술 중 거울을 활용한 시각적 효과를 이용했을 때 가슴압박의 질을 비교함으로써, 좀 더 나은 물리적 요소를 제공하여 효과적인 심폐소생술을 할 수 있도록 하는데 기초자료를 제공하고자 시행 되었다. 무작위 교차방법(Randomized Crossover Design)에 의한 실험 연구로 BLS Health Care-Provider 자격을 이수한 28명을 대상으로 가슴압박 시행 시 깊이, 속도, 압박 대이완의 비율, 팔의 각도, 용이성 등을 측정하였다. 수집된 자료는 SPSS Ver. 23.0 for Win 통계프로그램을 이용하여 분석하였다. 본 연구의 결과를 종합해 보면 심폐소생술에서 가슴압박 시행 시 거울을 활용한 가슴압박 방법을 이용한다면 효율적인 가슴압박을 할 수 있었고, 가슴압박의 평균 깊이, 압박 대 이완 비율, 팔의 각도, 구조자의 자세가 나아져 가슴압박의 질적 지표가 향상되었음을 알 수 있었다. 하지만 거울을 활용한 가슴압박 방법에 대해 다양한 환경요소 및 직군에 대하여 추가적인 연구를 통해 임상적 활용의 가능성을 확인하는 것이 필요 할 것이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.388-390
• /
• 2022

심정지(Cardiac arrest)는 원인과 관계없이 심장의 박동이 정지되어 발생하는 일련의 상태를 말한다. 심장질환에 의한 심정지는 매년 우리나라 3대 사망원인에 포함되며 예측이 불가하다. 심정지 발생시 환자의 생명을 구하기 위한 유일한방법 중 하나는 심폐소생술이며 이 술기를 통하여 순환을 유지시킬 수 있다. 이에 소아 심폐소생술 중 새로운 가슴압박법을 활용에 따른 가슴압박의 질을 비교하였다. 연구결과 가슴압박의 평균깊이가 유의한 차이가 있었고(48.93±6.76, 53.86±4.56, <0.001), 압박대 이완 비율에도 차이를 보였다(0.87±0.13, 0.96±0.10, <0.002). 또한 자세를 의식하는 정도에서도 유의한 차이를 보였다(4.93±0.85, 8.14±1.38, <0.001).

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (D)
• /
• pp.304-306
• /
• 2006

본 논문은 16비트 칼라 LCD 디스플레이 장치를 갖는 휴대용 단말기에 영상을 이용한 그래픽 사용자 인터페이스(Graphic User Interface : GUI)를 제공함에 있어 단말기의 저장 공간을 효율적으로 사용하기 위하여 대부분 비손실 영상 압축 기법을 사용하는데, 이들 압축 기법의 압축 효과를 높이기 위한 전처리 과정 방법에 대하여 기술한다. 전처리 과정은 일반적인 칼라 영상의 각 8비트로 구성된 R, G, B 컴포넌트를 16비트로 구성된 RGB 비트 수에 맞도록 원 영상의 칼라를 조정, 16비트로 축소된 칼라 영상에서 사용된 칼라 수를 계산하는 단계 칼라 수가 사용자가 입력한 칼라수의 임계값 보다 작은 경우 인덱스 칼라 이미지를 만드는 단계, 인덱스화된 영상과 칼라 수가 임계값 보다 큰 경우 16비트 칼라 영상을 대상으로 영상을 겹치지 않게 분할하는 단계 분할된 영상의 각 블록 단위로 Run의 평균 개수가 가장 많은 스캐닝 방법을 결정하는 단계 그리고 스케닝 순서에 따른 기존의 비손실 압축 기법을 적용의 순으로 이루어진다. 본 논문에서 기술한 전처리 단계를 거친 영상을 JPEG-LS에 적용하였을 경우 동일한 영상에서 약 $10{\sim}20%$의 압축 효율을 얻을 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제29권8호
• /
• pp.1485-1490
• /
• 2008

Dumbbell-shaped aromatic amphiphilic molecules consisting of a dodeca-p-phenylene as a rigid segment and oligoether dendrons as a flexible chains were synthesized, characterized, and their aggregation behavior was investigated in the bulk and at the air-water interface. In contrast to the molecule 2 which shows a nematic liquid crystalline state, molecule 1 based on shorter dendritic chains was observed to self-assemble into a 3-D primitive orthorhombic supercrystal. And molecule 1 at the air-water interface was observed to reorganize from circular plates to ring structures by lateral compressions.

• 소성∙가공
• /
• 제4권1호
• /
• pp.39-47
• /
• 1995

The compression molding of SMC (sheet molding compund) at room temperature was analyzed based on rigid-viscoplastic approach by three dimensional finite element program. The developed program was tested by solving the three dimensional compression of wedge type specimens of aluminum alloys at various processing conditions. The simulation results were compared well to the experimental results available in the literature. based on this comparison the program was proved to be valid and was further applied in solving compression molding of SMC, which is a thermosetting material reinforced with chopped fiber glass. To investigate the effects of friction conditions and mold closing speeds for compression molding of SMC charge at room temperature, compressions of the cylindrical and rectangular shaped SMC were analyzed for various friction conditions and mold closing speeds. The calculated load values were compared to the experimental results for the compression molding of cylindrical specimen.

• 한국멀티미디어학회논문지
• /
• 제21권10호
• /
• pp.1131-1141
• /
• 2018

Motion Estimation which is used to reduce the redundant data plays an important role in video compressions. However, it requires huge computational complexity of the encoder part. And therefore many fast motion estimation methods has been developed to reduce complexity. Multi-view video is obtained by using many cameras at different positions and its complexity increases in proportion to the number of cameras. In this paper, we proposed a fast motion estimation method for multi-view video. The proposed method predicts a search start point by using correlated candidate vectors of the current block. According to the motion size of the start search point, a search start pattern of the current block is decided adaptively. The proposed method proves to be about 2 ~ 5 times faster than existing methods while maintaining similar image quality and bitrates.

• Computers and Concrete
• /
• 제9권5호
• /
• pp.341-355
• /
• 2012

Numerical studies are performed to predict the stress-strain behavior of rectangular RC columns confined by multi-spiral hoops under axial and eccentric compressions. Using the commercial finite element package ABAQUS, the Drucker-Prager criterion and the yield surface are adopted for damaged plasticity concrete. The proposed finite element models are compared with the published experimental data. Parametric studies on concrete grades, confinement arrangement, diameter and spacing of hoops and eccentricity of load are followed. Numerical results have shown good agreements with experimental values, and indicated a proper constitutive law and model for concrete. Cross-sectional areas and spacing of the hoops have significant effect on the bearing capacity. It can be concluded that rectangular RC columns confined by multi-spiral hoops show better performance than the conventional ones.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.224-231
• /
• 2009

Techniques measuring Maxwell displacement current (MDC) and LB films surface measuring technique have been applied to the study of monolayers of polyamic acid containing azobenzene. MDCs was generated from monolayers on the water surface by monolayer compression and expansion. It was generated when the area per molecule was about $103{\AA}^2\;and\;78{\AA}^2$ just before the initial rise of the surface pressure during the 1st and 2nd mixed monolayer compressions cycle, respectively. It was the maximum of MDCs appeared at the molecular area just before the initial rise of surface pressure in compression cycles, and we have found that the increase of aggregations causes the noticeable increase of the surface roughness.

• 한국유체기계학회 논문집
• /
• 제6권2호
• /
• pp.62-69
• /
• 2003

An oil-free turbo-compressor supported by compliant foil bearings which remove oil-contamination by elimination of a conventional ball bearing and oil lubrication systems is presented. Turbo-compressor makes two individual air compressions with two impellers at a operating speed of 39,000 rpm. In this study, the rotordynamic effects caused by aerodynamic instability were investigated with variable mass flow rates. Correlations between frequencies of pressure fluctuation in two diffusers and those of excitation forces on rotor were clearly observed in an aerodynamic unsteady region. Thus, these results show that it is beneficial to design high-speed rotating turbomachinery by considering coupling effect between aerodynamic instability and rotordynamic force.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1033-1036
• /
• 1999

In storage technology it is desirable to have greater storage capacity at lower costs. Data compression addresses these demands by reducing the amount of data that must be stored to a given size of media, thus lowering the cost of that storage device. In data compressions it is desirable to have faster transfer rates at lower costs. Data compression addresses these demands by reducing the amounts of data that must be transferred over a media with a fixed bandwidth, thus reducing the connection the. Data compression also reduces the media bandwidth required to transfer a fixed amount of data with a fixed quality of service, thus reducing the costs on this service.